Andydigital

Sometimes the area where the frequencies are displayed collapses, it doesn't happen often, but if it does happen to you just look for a divider going all the way across the screen with a little tab in the centre of the screen with 4 little dots on it, grab those dots with your mouse and pull the divider down, you should now be able to the the frequencies for that tab, as long as its applicable of course.

I use it all the time and it pretty much always reads the same as your current position anyway so there isn't much point to it really, but it is nice to have an added bit of realism that does actually work. I am using Navdatapro though, not Navigraph.

I've been using gate numbers for years with the NGX and other aircraft that support it, perhaps this is just a navigraph issue in the US, I dunno! Aerosoft's Navdatapro certainly has gates in all of the relevant airports. They have 107 gates and their coordinates listed for KATL.

You did something wrong then the phone activation will work if you input the data correctly.

The NGX and the Dodosim seem to be working fine now Artem, thank you.

Just to confirm its all repeating button commands that are broken, its not just the NGX. I have a command setup for the Dodosim 206 helo for the engine starter that uses the repeat while held function and that is broken too, so presumably all repeating functions are no longer working. Have a nice holiday and I'll revert to the previous version for now then.

It was working fine in the previous version on my system and always has done.

Edited previous post.

In the PMDG NGX Elevator trim is glitching like crazy, it will not stop moving, even reassigning isn't helping. EDIT: Reloading the Lua Engine stops it, but the moment you press the button it starts freaking out again. If I assign to the none repeating option it doesn't freak out but this isn't very useful for trimming as you have to press the button many times. Edit: added NGX to first sentence I forgot to say that sorry.

Have you actually assigned anything to those options that aren't working, as far as I am aware they are not assigned by default for the MCP1, you have to do them yourselves as Guenter no longer has the MCP1 panel, so he couldn't make the assignments himself. Or did I just dream that answer, I'm sure I did read that somewhere here in one of the LINDA threads though.

Tick the box at the bottom of your screen shot that says "show all variations".

No problem and thank you for the apology, although I do specifically state that I am not a VRi employee on the VRi forum, if you look at the small print in the signatures attached to all my posts at the VRi forums, you will see it The software developer is now aware of the problem and he says is going to look into it. He also has not used the 767 in many years, although he did warn me this morning in an email that on his system the PMDG NGX and the Level-D 767 interfered with one another in the past, so he removed the 767. I tried disabling all my addons this morning apart from FSUIPC and the 767 but still there was a delay in the displays on the VRi hardware updating. I hope the VRi developer can find a fix for this soon for the people that still use that aircraft. Keep and eye on the VRi forum further news.

Howard, thanks for the flowers but if you are going to quote, please quote the correct person, to a bystander it looks like you are talking to me and not "elee" in post #15. If you require any assistance Howard then please feel free to update me in a PM at the VRinsight forum, you know I am always happy to help.

I've just installed the Level-D 767 for the first time in about 4 years, I took me ages to find the key for the installer. Wow the 767 looks horrible now, although for an almost decade old aircraft its not surprising. Anyway I've confirmed the issue here on my PC too and have contacted support directly myself to see if they know what the issue is. Keep an eye on the VRi forum where I will update the threads there when I have more info.

I believe this is a problem in the registry, you need to go to the Saitek tech support forums and find out how to fix this problem, it is a well-known issue. You may get lucky searching Google too.

You do realise its my terrible support you are talking about, I provide first line support voluntarily (for free) on the community forum, I am not a VRinsight employee. Anything I cannot help with because I have no knowledge of the problem or perhaps I don't own the aircraft in question, I forward the user onto VRinsight directly via email. Now rather than stirring up trouble on other forums, why not answer the question I just asked you on the support forum, but answer there not here. I am trying to help you but you insist on trying to make me look like an idiot instead and making threats, that never helps the situation under any circumstances. I am a VRI customer just like YOU.

It so heavy that you are likely to break your foot if you dropped it on it, the floor would likely be damaged too, its well built and wont slide

I tend to remember little details like this, I've no idea why, its just the way my brain is wired up I suppose, it comes in handy in my role as a beta tester/tech support that is for sure.

I suspect you have an option called "Normalisation" enabled in your sound card control panel, this boosts all sounds to the same level, even sounds that are supposed to be subtle and barely audible under normal circumstances. A side effect of this is that when a loud sound is played (such as a loud button click for example) it suddenly lowers the volume of all other sounds that were boosted. Then if no further loud sounds are made the overall volume level will slowly be turned up again over the next 5 or 10 seconds. If another loud click is heard the volume drops again, rinse and repeat....

Seems someone did it for you now, thanks kind sir whoever you are.

Can you guys please remove the email address from your posts please otherwise VRi will end up getting bombarded with spam from bots that scour forums looking for email addresses. Just obfuscate the address so the bots cant read it i.e. te ch AT VRinsight dot com would be one example. If you no longer can edit it hopefully Guenter will do it for you. Thanks.

There is an expanded manual at the link below that may help. http://www.fs-linda.com/downloads/Introducing_LINDA_v1.01.pdf

Have you checked that there are no automatic assignments in the FS Controls interface, FS always assigns a default set of controls to any device that appears to Windows as a joystick. You sound like you possibly have dual assignments, i.e. those you have created and those assigned automatically by FSX. Or maybe you have some in FSUIPC itself which you forgot to unassign when you started using LINDA. P.S. Nice home built Quad :good:

http://forum.avsim.net/topic/422949-linda-support-for-saitek-panels/

Hi Brad, No sorry I've not used the CDU2 with FSUIPC, there has never been any need for me to try it to be honest and you would have to reprogram everything yourself through FSUIPC if it was even possible. I occasionally get the odd double input or two, but its not often. I think the performance of the PC has a lot to do with input errors as well, if your PC is struggling to maintain a frame rate higher than 25 or so, I think there is a bit of lag that sometimes causes the software to glitch. This is purely conjecture on my part though. The thing that bugs me the most is the CLR key clearing the whole scratchpad rather than just the last character entered, I was told this is a bug in the NGX SDK. I'm hoping PMDG fix that in the next release of the NGX SDK, along with the missing features required to get the V737 Overhead panel working 100% i.e. being able to read the voltages on the AC/DC panel and the door status annunciators, none of that is possible at the moment and its been 2 years now since PMDG said during a FS conference that they would get onto fixing it.