Everything posted by toddl
-
Fenix A3xx Update v3 released [21OCT26]
To each his own Farlis. To paraphrase Joe Patroni in Airport, The Fenix can withstand almost anything ... except a bad pilot. So as for your "peak simmer behavior" when landing, keep on banging away and justify it as you wish. I and others will do the same and decide for ourselves what makes a firm landing or not. Have a nice day.
-
Fenix A3xx Update v3 released [21OCT26]
Because the old version would float, I would typically retard the throttles at around 30 feet and begin my flare. When I did this with version three, I cratered the aircraft on my first flight and landed at 275 fpm. On my second flight I left the power in until about 20 feet and pulled it back slowly with a modest flare which I maintained, and I landed at 100 fpm only a little beyond my target. For me at least I needed to adjust my technique and will need to keep working at it! Good luck!
-
Inibuilds A388 - Navigraph Cycle will not update
Did you import a Simbrief flight plan? If yes, try it without doing that.
-
Inibuilds A388 - Navigraph Cycle will not update
Load the plane at the gate cold and dark. Before doing anything go to the EFB and the update navdata button should appear. At least that worked for me after a helpful hint on the ini discord. Good luck.
-
iniBuilds A380 ...
For BTV to work you need to first select (click on) the end of the runway you are landing on and then select your BTV exit. It is different than the A350 in that regard. I had trouble calibrating too with my Thrustmaster but I think I finally sorted it out by ensuring that all four throttle axis were assigned in MSFS control settings and then calibrating using the 4 axis option. I hope this helps. I am really very impressed with this plane!
-
New Nvidia Driver 616.56 Out
toddl replied to cianpars's topic in Video Hardware: Monitors | Multi-Monitors | Video Cards | Drivers etcI took a frame rate hit with this driver in 2024 so I rolled back.
-
iFly 737 Max version 1.1.0.0 is out now
I had the same issues. I uninstalled all of my liveries and then uninstalled the plane and reinstalled the plane and the update. Reloaded in the sim and then exited and reinstalled the liveries. All is working now.
-
iFly 737 Max version 1.1.0.0 is out now
Ha! You can change the setting to use MSFS default controls in the Manager. Glad you got it sorted.
-
iFly 737 Max version 1.1.0.0 is out now
Are you scrolling with the mouse wheel to turn on the flight directors and auto throttle?
-
MS Flight Sim 2 (1984) with scenery disk 12 (New York)
Reading this made my brain start to hurt as in went back into what's left of its archives to see if I can help. I had many of the discs but need to restart my brain with a DOS boot to go back in time! Let me think about it.
-
Official Aerosoft-Toliss A340 trailer and livestreams of it
Paul, Be sure when you are in the Library page that you select MSFS 2024 in the left column. It defaults to MSFS if you don't. At least that is what worked for me. Good Luck!
-
PMDG 737-800 RELEASED!
The way I avoid the tire scrubbing sound in most instances even at speeds higher than 10 knots is to start each turn using my rudder pedals and then apply the tiller. I also use the rudder pedals exclusively to maintain the taxiway centerline when going straight. With that said I generally don't make large turns at greater than 10 knots but by using the above I can make mostly noiseless turns on high-speed taxiways at greater than 10 knots. YMMV though.
-
iFly 737 MAX for MSFS2024 - UPDATE: 15-JUN-25 1446Z: Working
Thanks Mark! Hopefully you both can sort this out. Always appreciate that I paid for your wonderful software for MSFS 2020 and you are supporting MSFS 2024 for free.
-
iFly 737 and MSFS2024 aviaCDU
Same
-
MSFS2020 latest update does not address MSFS not closing.
Same here.
-
MSFS2020 latest update does not address MSFS not closing.
I have this problem intermittently which is odd. I have tried to make sure all of my simconnect programs are shut down (Volanta, avia server etc.) before exiting MSFS and that seemed to work but then it started again.... Go figure.
-
KDFW from Imaginesim
Thanks for the update. I don't have blurriness just potholes and trees on the 4 taxiway bridges. Never a dull moment in Dallas!
-
KDFW from Imaginesim
I applied the elevation fix previously discussed (removed the .tin file) and everything was fine. However, after the latest City Update 10 the taxiway bridges have trees on them and a lot of potholes caused by the elevation issues previously fixed. I have no problems with blurry ground textures, however. I replaced the .tin file to see if that was the issue but no effect. Is there anyone else experiencing this again and if yes, any ideas how to fix it? Any help would be much appreciated. Thanks!
-
KDFW from Imaginesim
I just "deleted" (moved it elsewhere) the .tin file and it fixed my elevation and texture issues.
-
KDFW from Imaginesim
Thanks for this! Which solution works best if you know? Removing the photogrammetry cities or removing the .tin file or both? Any help much appreciated.
-
KDFW from Imaginesim
I am happy with it as well. Way better than default and much needed. Blurry runways is an issue for me but I had that with default. Hopefully it gets fixed but I can live with it given everything else. I fly AA a lot and really needed a decent DFW so I am good. No comment on the price. To each his own. Just my opinion.....
-
Upcoming soundpack for PMDG lineup
I think the sounds are great. However, I have run into a problem and I am not sure if it is caused by the new sound pack or today's update from PMDG. I set pause at top of descent which works fine except when I resume after the pause all engine and wind sounds are gone in the cockpit. Changing views used to fix this but no more. Anyone else encounter this or have a solution? Any help is appreciated. Thanks!
-
msfs 2020 marketplace drives me nuts!
I had this exact same issue. I solved it by launching MSFS from the Microsoft Store as opposed to my desktop icon and that worked for me. Give it a try. Good luck!
-
GSX PRO Update 3.3.2
Apparently this is a known flaw with MSFS not GSX. I fixed it by going to the content manager and searching "volo" and uninstalling the 4 files that popped up (I think there were 4). After that the gates worked for me. Not sure this is the best solution or even the right one so put to you to try. I read about this on Flightsim.TO when I was updating the scenery. You can find the info there. Good Luck!
-
MSF2020 iFly 737-8 MAX
Ditto! Would love to add this to the MAX. So grateful for the add on of the TFDI MD-11. It's a game changer oddly enough. Tough to fly without it.