justinpilotatc

Love it. Lol nice work sir, nice work.

Love it! I need to get some new sound files for a couple events. The FT E175/190 is my favorite for butt kicker. The thump really depends on the touchdown rate for it. The NGX seems less descent rate dependent and a bit too much vibration in smooth air. I haven't downloaded any alternative files for it yet.

Who's paint is that? The one I downloaded was not good.

That is strange. My fix was simply updating my database.. I was a few weeks late. Tisk tisk..

I show the correct MTOW for the -800 in the FMC in pounds. I haven't checked the -7 or -9.

I believe he meant for the auto callouts of v1 and rotate by the aircraft. If both speeds are the same it can't call out both.

Ahh,thanks for the link. I searched the forums but nothing came up. I hated the eldee arrival into DCA if there was icing in the descent. I flew the ERJ for eagle and with the added power required for the anti icing system made it dang near impossible to make the restrictions. Last night that's exactly what I had to do. Vnav not available due to the vert path full error and I had a a/t failure to boot. Definitely added work load. Thank goodness the alt rest are between restrictions. Makes it much easier then hard altitudes.

Dang auto correct. Title should be vert path full.

Hadn't seen this until tonight. ORD to DCA with the fredm1 arrival and RNAV 19 approach. Seems to overload the vnav path calculations.

I just went through this. You have to set it up as a . Offset for Eng #1 - 70320, and for # 2 - 70321 If I remember correctly you have to put a 1 and 0 in there somewhere to identify on/off type setting. Try it out. Someone else may have better instructions.

A good way to know if something needs to be on all the time is- if a master caution is triggered when its off then it should probably always be on unless an emergency checklist calls for it to be off.

I thought this was from a lack of space on the hard drive. Like as files are uncompressed the hard drive runs out of space to use them?

This would be awesome. I'm hoping for pop out displays for home built setup I have. Of course I'm set up for 737ng layout so displays will not be vertical setup but that's ok.

No link..

I use a 42" plasma. It's awesome.

0800-1400z arrivals land east unless winds prohibit it. Nice shot.

Yeah I'm dead in the water with it. So, NGX only.

Well after reading this I went online and bought one. Will be here Monday.

Shouldn't you be driving rather than browsing AVSIM? Bmw's don't need drivers. That's what makes them worth the extra money.

I have a 660ti graphics card. 42" plasma is in the hdmi out Triple head to go (only running as dual head to go) has the EICAS and overhead panel monitor. This is in dvi-1. I had to take the pfd/nd off the tH2Go because it is placed in landscape but the eicas had to be put in portrait for size. I can't set different orientation between screens on the triple head so I utilized the display port for that monitor and places the overhead panel and eicas monitor to portrait. Pfd nd is run in 1 23" LCD. This is in displayport with hdmi adapter. Fmc is in DVI-2 with VGA adapter. How did I build the MIP? MDF, glue, tack nails. The monitors are resting on a wood brace on the bottom and I put another wood brace to hold them flush with the panel. 1 screw through the side of the MDF into the wood brace and viola. Thanks Justin

Here's my work in progress. NGX style.

I do need to do the mod to get the display right but the keys don't respond. I have selected level-d in the configuration for the CDU but it won't interface. The .dll location is my problem I believe.

Delete fsuipc and reinstall. This happened to me before. For some just deleting fsuipc.ini us enough. For me it took a full removal and reinstall if fsuipc.

Just FYI. It's CYYZ. Enjoy!

Hs anyone successfully used the FDS/CDU and level d? I show it is an option but there are no instructions to be found online. I found the level d sdk but am not sure where to place what in order for them to talk. Thanks Justin