Gerwil

Occasionally ATC controllers and AI traffic stop responding here. The amount of AI traffic contributes to the problem to occur or not. I found, and I always hope that no other traffic gets handed over to the next radar station before me, because thats when it happens. When an AI speaks (on the new freq) before my co-pilot can contact the new controller then I know the ATC will go silent. Still waiting for the A310 update. They mentioned in december they fixed their problem with ATC not functioning in the A310.

I run a 'normal' sized pc n a very small bedroom. The small table in the corner has my flightsim setup with all controllers, G2 hmd, semi 5.1 sound set, and monitor. The TV is at the foot end of the bed, connected to the pc for like 15 years now 🙂 Edit; Wired keyboard on the table, wireless kb on the bed. For me, no need for Xbox.

Thanks Bert. This did work but unfortunately also caused a new issue, a short rumble sound during descend with a landing gear warning.

There used to be a hole in Brasil, you visited that?

No big ones or I would have shouted harder about them in the beta period. A mod will come at some point I hope. The doors can't be opened in VR. During climb diff. pressure exceeds its limit and triggers a warning (can be overcome by clicking DUMP twice in quick succession). No registration on the external model of the base TBM and all custom livery's that fallback on it.

Just make sure (when you have to reïnstall the bulk) that it is uninstalled correctly via Windows apps utility and manually any reemains. It is odd that it still says 'Update' instead of 'Install' on your screenshot. And with Addon Linker there is no need to back-up the Community folder.

I think someone missed here that the installer wiped your whole installation, including community folder. It wasn't me, I did read your initial post. I hope you will soon have things up and running again.

https://i.imgur.com/51PTKBw.jpeg You should click in the line here with the default address, this will give the option to specify your own install location. Once all is installed, back-up that location to a external ssd, just to prevent this happening again 🤣

Ah okay, then might have something to do with 3pd scenery?

Did it just snow over there?

Sweet! Unless they made some last-minute changes to the beta, this update will be super stable. Never have I had so much satisfaction from a sim flying the TBM lately, it was just perfect. Can't wait for the other updates to arrive hopefully soon too, HJet, VisionJet, A310.

Ok will try and see how it goes. Most of them don't seem switches though.

Thanks for the pointers. Glanced at the readme 🙂 but the ini is hard to read, everything in caps and no spaces, but I now left most on default and set those two as adviced. The jumping has gone but they now ignore the GS. I best wait till Asobo fixes the ai, hopefully soon.

I tried it but after seeing ai planes jump up and down while on approach I stopped using it. I am still tempted to use it but only for its cruise speed adjustments. Is it possible to switch everything else off? I only saw a few options can be switched off with a '0' but not all?

If you made custom camera's (Ctrl Alt + #) you have to copy from the custom PMDG737 Cameras.cfg into the custom PMDG739 Cameras.cfg found in: C:\Users\username\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\SimObjects\Airplanes This is with the Store MSFS, Steam might be different. Edit: But since sizes 700 vs 900 are different position of the cams may be off. Zoom is set with "InitialZoom =0.35" in the Cameras.cfg under either "Pilot" or "Pilotvr", (when flying in VR).

On second thought... deleted.

Hi Altenae, it is already in place for over a month now 🙂 You have to enable the navdata option in FSDT Installer/GSX settings.

If this means that the plane can be downloaded for free and then decided upon if one wants to join the early access, that's not bad at all.

No Marketplace update pending and I have the E2 version so yes, 1.07. At this moment I best wait till the AAU1 Hjet gets released. If Marwan manages to implement the WT G3000 the way it is done in the AAU1TBM then that would be just marvellous. Looking forward to that.

Thats very good news, thanks Ryan. After flying the TBM in AAU1 with the updated G3000 where I could do whatever I liked to my flightplan, it was a bit of a pain to fly the Hjet again. Although updated I still got the USR and USER waypoints and choosing a D> the plane would turn around and fly to a waypoint I already passed 😅 Looking forward to AAU1 Hjet!

I am not seeing any traffic either, not in the Visionjet, the TBM or the Hjet. Before the current beta all was fine iirc.

Oh wow, with these resolutions you guys are utilising you don't need AA at all 😁 My resolution is at 3100x3029 in G2/DX12 and I have AA off. There is some shimmering but not annoying. Everything is SUPER crisp and no stutters. I have set the resolution in OXRTK (system tab/override resolution). This way there is no need to set render resolution in MSFS or OXR. Using NIS or FSR at 96% may help to get rid of remaining shimmers. Model edge jaggyness remains but at those res. not a big deal.

Love the creations by this developer. Especially the internal engine sound, which seems to be a actual recording of internal engine(s) sound. The big irons devs all seem to have taken the external engine sound recordings and modfied it to a cockpit representation with mostly dissatisfying result, ie too loud and too high pitched whine etc. I must admit though that doing a engines recording in the cockpit of big jet, without the sound getting mixed with avionics cooling sound and such, must be really hard if not impossible.

Ah yes, you're right, the Fenix has this also in EFB settings but I have this switched off because it did interfere with the GSX handling of such things.

Nope, default or Navigraph all the same.