Jump to content

X-Plane 10.30 Plans/Fixes from Ben's Blog


Recommended Posts

Posted

I love how well XP10 works with my specs, but I definitely want to see continuius improvementm such as:

- Terminal buildings

- Real world moon phase

- Seasonal textures

- Turn AI on/off

 

I look forward to future updates

LUIS LINARES

Processor: Intel Core i9 6700K 9900K (5.0 GHz Turbo) Eight Core; CPU Cooling: NXXT Kraken X62 280mm CPU Liquid Cooler; System Memory: 64GB Corsair DDR4 SDRAM @ 3200 MHz, RGB; Graphics Processor: 11GB Nvidia GeForce RTX 2080 Ti, GDDR6, Primary Drive: 2TB Samsung 850 Pro Solid State Drive (SSD)

 

  • Replies 35
  • Created
  • Last Reply

Top Posters In This Topic

Posted

Robert, I can perfectly understand your position, and I appreciate your contributions regarding the 777!

 

It's always a delight to read comments from an enthusiastic user ;-)

 

Thank you for your kind words - I appreciate them!

 

 

No problem. I know what you mean. But I would like XP to shine on it's own. And it does better and better...

 

I think XP is amazing - I am still STUNNED by the much better nightime experience. My only real knock is the overall night scenery is too dark in XP. I wish that Austin would include a 'brightness/contrast' slider in settings to allow us to ramp up the night view. It's nearly impossible to see the plane in certain external night views, unless you are close to a brightly lit airport or very near the ground.

 

x plane is not the king of smoothest even in 64 bits, i know all people here have GTX680 and GTX690 so they aren't aware, but with my GTX660 i can drop to 24-25 fps in high density areas withouth HDR

and if i max everything i even get CTD at KJFK.

 

I don't disagree that you can cripple X-Plane - if you max it and don't have max hardware - I get that. OTOH, and this is KEY, all the settings for X-Plane in terms of performance are in ONE SINGLE PLACE. This beats the pants out of FSX, where you have FSX settings, plus settings for all the scenery and many of the add ons which ALSO affect performance! (UTX), UT2, ORBX PNW, etc.

 

In FSX, you have to crawl all over your settings in many different places, make one change in UTX (example NIGHT LIGHTING) and then you can wind up with horrid frames.

 

XP allows 1-stop tweaking and is 'built in'. That is MUCH simpler. Also, XP has a way you can get real-time performance (frames and more) on your screen... that is VERY handy to see what you are actually achieving, and you can make adjustments accordingly and prevent a great number of problems.

 

That's because FSX is CPU bound and mostly ignores the GPU. It's all because ACES wrongly predicted that processor speeds would continue to exponentially increase. They never saw the multicore CPU/powerful GPU combo coming until they were too far into development to make any drastic changes to the code, and so you have a 7-year old flight simulator that can chug even on today's top of the line hardware.

 

My advice: once you're done tweaking settings to your satisfaction, turn off the FPS indicator and just fly. You'll never even notice when framerates drop into the 20s.

 

Yes, this is well-known. Let's not forget also that FSX is forever stuck in 32-bit mode and will NEVER be able to use high-end equipment to the fullest, as opposed to XP. That alone killed my love of FSX.

 

I love how well XP10 works with my specs, but I definitely want to see continuius improvementm such as:

- Terminal buildings

- Real world moon phase

- Seasonal textures

- Turn AI on/off

 

I look forward to future updates

 

All of these wishes are things many of us want to have... but I'm more than happy letting Austin Meyer take us wherever he wants to with XP. He's one smart dude!

 R. Scott McDonald  B738/L   Information is anecdotal only-without guarantee & user assumes all risks of use thereof.                                               

RQbrZCm.jpg

KqRTzMZ.jpg

Click here for my YouTube channel

Posted

Thank you for your kind words - I appreciate them!

 

 

 

 

I think XP is amazing - I am still STUNNED by the much better nightime experience. My only real knock is the overall night scenery is too dark in XP. I wish that Austin would include a 'brightness/contrast' slider in settings to allow us to ramp up the night view. It's nearly impossible to see the plane in certain external night views, unless you are close to a brightly lit airport or very near the ground.

 

 

 

I don't disagree that you can cripple X-Plane - if you max it and don't have max hardware - I get that. OTOH, and this is KEY, all the settings for X-Plane in terms of performance are in ONE SINGLE PLACE. This beats the pants out of FSX, where you have FSX settings, plus settings for all the scenery and many of the add ons which ALSO affect performance! (UTX), UT2, ORBX PNW, etc.

 

In FSX, you have to crawl all over your settings in many different places, make one change in UTX (example NIGHT LIGHTING) and then you can wind up with horrid frames.

 

XP allows 1-stop tweaking and is 'built in'. That is MUCH simpler. Also, XP has a way you can get real-time performance (frames and more) on your screen... that is VERY handy to see what you are actually achieving, and you can make adjustments accordingly and prevent a great number of problems.

 

 

 

Yes, this is well-known. Let's not forget also that FSX is forever stuck in 32-bit mode and will NEVER be able to use high-end equipment to the fullest, as opposed to XP. That alone killed my love of FSX.

 

 

 

All of these wishes are things many of us want to have... but I'm more than happy letting Austin Meyer take us wherever he wants to with XP. He's one smart dude!

 

Robert I agree, I spent a lot of money on FSX myself and now I am in love with X-plane 10. I don't have as good hardware as you ( 2500k@ 4.5 GTX670 4GB 8 gigs of ram) but XP10 uses my hardware much better than FSX does and I get way better performance in XP10..

 

 

I have not bought the 777 yet because of a dispute I have had with the .org but after reading your comments I might put that behind me and just buy it.

Mike Avallone

[email protected],Corsair H115i cooler,ASUS 2080TI,GSkill 32GB pc3600 ram, 2 WD black NVME ssd drives, ASUS maximus hero MB

 

Posted

XP allows 1-stop tweaking and is 'built in'. That is MUCH simpler.

 

Is that a function native to the simulator, or simply the lack of addins such as Orbx, weather, scenery, AI traffic, weather, environment, and others to work with? In many ways, X-Plane is "simpler" because there's very few supporting addons out there to try and mesh together. Blessing? Curse? That's up to the end user.

 

Personally, I've found my X-Plane tweaking to be on par with MSFS - perhaps a little more involved, actually... primarily because of my lack of X-Plane configuration experience. I'd expect it to end up about the same - once I figure out how I want XP set up, if I ever need a reinstall, it'd be a very quick exercise to get it all in place... just as configuring FSX is for me today.

 

-Greg

Posted

Robert I agree, I spent a lot of money on FSX myself and now I am in love with X-plane 10. I don't have as good hardware as you ( 2500k@ 4.5 GTX670 4GB 8 gigs of ram) but XP10 uses my hardware much better than FSX does and I get way better performance in XP10..

 

 

I have not bought the 777 yet because of a dispute I have had with the .org but after reading your comments I might put that behind me and just buy it.

 

The Ramzzess 777 is a game-changer. It will take you a little getting used-to if you're used to PMDG 737NGX - some procedures are different, and the MCP is different too, but the more you fly it, the more fun it is! It's a heavy- which feels a lot different from the NGX.

 

I put some custom recorded sounds up on X-Plane.org forum which you might want to substitute for the default PA Announcements that ship with the airplane. You just copy them to the aircraft sounds folder, the PA subdirectory, and overwrite the files that are there by default. Here's the link if you want to preview/download the PA announcements I made.

 

If you want to really go up the ladder of realism, I highly recommend PilotEdge realtime online ATC. It's free for 2 weeks, then they have various subscription plans. Many with no committment period. I signed up for unlimited annual use which averages 50 cents a day. They are online 7 days a week from 8am to 11pm Pacific Time. I love that. No more wishing and hoping that VATSIM or IVAO are online and unlike VATSIM/IVAO, the controllers at PilotEdge don't suddenly decide to close up shop without warning...which is a total bummer.

 

Right now Pilot Edge is limited to Southern california area ops, but they are in talks to open another operations hub on the EAST coast, allowing for cross-country flights. How good are they? They are professionals. And you don't experience the volume spikes that are common on VATSIM. The cleanest sound I've ever heard, they take you across all the frequencies... clearance, ground, tower, departure, center, approach, tower, ground... you'll be quite busy on the radio, I can tell you!

 

Also, there is a 64-bit plug in to make most Saitek gear work in XP 10. I think it's called XSaitekPanels.

 

Hints to get up and running with the Ramzzess 777:

 

There is a main-menu panel which is in the upper right corner of XPlane after you install the aircraft. Open the flyout by clicking on it. There is a hidden icon of the airplane, click on the MENU tab to open the fly out menu:

 

 

x8hi985z42r9wx145q9r.jpg

 

Then you will see the main menu for the 777. This is the hub of loading the plane for fuel - do NOT use the FUEL loader in XP10!

 

To load fuel, the plane's doors must be OPEN (you need to CLICK on them but may not be able to see them if the Quick Start text is showing like below:

 

r1z7nej70vh9j6nyjatp.jpg

 

Click the BLUE ICON on the 777 main menu to reveal the hidden airplane diagram. YOU MUST use the airplane diagram to open the doors, or else know the keyboard commands (I think it's Shift F1 and Shift F2 but I'm not sure I remember) those key commands are covered in the 777 Tutorial that ships with the plane. Here's the MAIN MENU with the doors unhidden:

 

ufuizaivi5nfsod4g5x3.jpg

 

Where the doors are highlighted in yellow, mouse click on top of the door squares (there are TWO). These are the only 2 doors that are needed to load fuel and passengers/cargo to the plane!

 

UNCHECK the custom failures, real limits and real time options, at least till you get familiar with the plane. Go to a site like FuelPlanner.com. Join up for the free trial membership so you can get the fuel loadsheets in KG instead of imperial pounds! Or you can spend time using a conversion factor, not worth the pain! Select the B777-200 aircraft from the drop down menu, then Enter the departure and destination ICAO airport codes into fuel planner and click LOADSHEET. You'll get a nice printout with all the data you will need to enter into the fuel boxes in the main menu as shown in the diagram above.

 

If you now click SAVE STGS (Save Settings), then ALL the data you have in your MENU will be available next time you start this plane, including your FUEL LOAD data. When the plane restarts for your next XP session, simply click LOAD STGS (Load Settings) and your previously saved data will come back, and the boxes you wanted tick marked will be ticked and the ones you don't won't! Cake!

 

Of course I had to have help finding all of this, because I couldn't find the AIRPLANE DIAGRAM (I didn't know you had to click the BLUE ICON in the upper right corner of the 777 menu!) The QUICK ZOOM will put a white magnifying glass on the left side of your X-Plane screen. Click the magnifying glass to see a layout of all the airplane's 3D panels. This helps you get around quickly as you are going through the pre-flight setup. Watch the tutorial video they include - it's a lifesaver! I watched the video, and within a short time, I was starting the airplane from cold and dark and pushing back, taxing,

and flying.

 

NUANCES: The APU on this plane will quit running after 10 minutes. If this happens you cannot start the plane, as no GROUND AIR CART is offered. There is another issue in extremely cold weather where you can freeze to death while programming the plane to start it up. So, at first, fly in warm climates or push the weather to a warm temp to remove that issue. Do all the setup while connected to ground power. After you're gassed and you've programmed the FMC, you can enable the Fuel pumps and Hydraulics and start the APU. Don't start the engines at the gate, because the PUSHBACK truck only works if engines are not running. After pushback (you uncheck the tickbox for pushback) you can start the engines, then switch off the APU.

 

 

So I wrote all of this to help you and other new 777 owners avoid some of the pain.

 

Also, it's best to always start with the 777 cold and dark. If you're flying online you should start at a GATE or RAMP, not on the runway (ATC won't like it if you start of the runway).

 

Cheers!

 

Is that a function native to the simulator, or simply the lack of addins such as Orbx, weather, scenery, AI traffic, weather, environment, and others to work with? In many ways, X-Plane is "simpler" because there's very few supporting addons out there to try and mesh together. Blessing? Curse? That's up to the end user.

 

Personally, I've found my X-Plane tweaking to be on par with MSFS - perhaps a little more involved, actually... primarily because of my lack of X-Plane configuration experience. I'd expect it to end up about the same - once I figure out how I want XP set up, if I ever need a reinstall, it'd be a very quick exercise to get it all in place... just as configuring FSX is for me today.

 

-Greg

 

Greg is correct, there is a DEFINITE learning curve as you configure your flight surface controllers for X-Plane. Honestly, the add-ons I've purchased, plus the ones I got free, generally don't require a lot of tweaking. Now the custom airplanes (Ramzzess B777) is a learning curve, but no more painful than the pain I experienced learning the PMDG 737NGX. It's just I got "used" to flying the NGX. At first, it was a nightmare. Any new complex airplane is going to have a learning curve, believe it.

 

I will say that a total reinstall of X-Plane is far less frightful to me than the same deal in FSX.

 

My .02 YMMV

 R. Scott McDonald  B738/L   Information is anecdotal only-without guarantee & user assumes all risks of use thereof.                                               

RQbrZCm.jpg

KqRTzMZ.jpg

Click here for my YouTube channel

Posted

Ive seen a video that ported over FSX sceneries to XPX. Does this mean that a good number of add ons for FSX can be ported over? This would make it easier to cope with all the addons expense that has been invested.

 

Also has anyone used TrackIr 5 with XPX?

 

What I would like to see is major developers start fully supporting XPX. However the way I see it, we are on the cusp of going two ways. P3D V2.0 or XPX Ver x.xx and they are all seeing what is going to happen before investing dollars in the platform of choice. I think most are hoping somehow someway P3d becomes viable since its a MSFS base and all their work is based on FSX, therefore would be easier to port to P3D. Just look at all the native installers for P3D.

 

That being said, if LM decides to cut off all these devs then it appears there will be a mass following to XPX.

There doesnt seem to be a full real time weather injection as well as proper AI traffic. And ATC seems to be lacking, nor has any developers been contributing that way. But this is definitly something to watch, maybe even play with from time to time when FSX doesnt play nice.

CYVR LSZH 

http://f9ixu0-2.png
 

Posted

However the way I see it, we are on the cusp of going two ways. P3D V2.0 or XPX Ver x.xx and they are all seeing what is going to happen before investing dollars in the platform of choice.

 

It all depends on whether P3D V2.0 will be 32 or 64 bits. If it remains 32 bits, it will have no future in the entertainment mass market (i.e. us).

"Society has become so fake that the truth actually bothers people".

Posted

Add mouse knob interaction for future versions

| FAA ZMP |
| PPL ASEL |
| Windows 11 | MSI Z690 Tomahawk | 12700K 4.7GHz | MSI RTX 4080 | 32GB 5600 MHz DDR5 | 500GB Samsung 860 Evo SSD | 2x 2TB Samsung 970 Evo M.2 | EVGA 850W Gold | Corsair 5000X | HP G2 (VR) / LG 27" 1440p |

 

 

Posted

It all depends on whether P3D V2.0 will be 32 or 64 bits. If it remains 32 bits, it will have no future in the entertainment mass market (i.e. us).

 

LM has already indicated the LONG term goal is 64bit. Devs all know that. I believe they are all waiting to see how all this licensing mess works out. Right now its extremely foggy, especially with the fact LM keeps encouraging FSX addon devs to support it. However if there cant be any future distinction, of corporate and consumer licence, I would expect to see a mass jump to x-plane. On the one hand LM doesnt want to lose all these addons as it only enhances any P3D product, but the corporate image they insist on, butts heads with that.

 

XPX keeps improving and its nice to see it is 64bit. More dev support and fix some bugs and issues that make it better than FSX, and there will have to be serious consideration to make the jump... I think.

CYVR LSZH 

http://f9ixu0-2.png
 

Posted

LM has already indicated the LONG term goal is 64bit.

 

That sounds more like internet conjecture taken as fact. Lockheed Martin has not said anything official at this point, and until they do ... by this I mean LM and not one of their cheer leaders like the Orbx guy. Then it is best not to expect it to happen.

 

Instead it's probably best to look at the current situation of both sims instead of trying to predict a future that might not happen.

Posted

64 bit is great but my sig below is what I require to be useful.

I care more about land class resembling reality, ability to simulate a rw ifr gps, fm's that allow one to maintain ifr proficiency, rw weather effects, and the eye candy immersion that fills in the gaps between a motionless desktop and the real thing.

64 bit-great-but without the other not all that useful though interesting in a certain way and why I keep hoping...

Posted

That sounds more like internet conjecture taken as fact. Lockheed Martin has not said anything official at this point, and until they do ... by this I mean LM and not one of their cheer leaders like the Orbx guy. Then it is best not to expect it to happen.

 

Instead it's probably best to look at the current situation of both sims instead of trying to predict a future that might not happen.

 

Wasnt 3rd party comment. Here is a quote directly from P3D website. just search 64 bit.

Its a goal to have, but not short term.

 

"

We would love to have true 64bit support, but this isn't a feature we can rush. We're dealing with a massive baseline that has been in development since 1977. The first MS version was in 1982, but even that was a year before I was born. Obviously the baseline has been updated and refactored many times, but there are still snippets of assembly code and 32bit pointer math floating around in there, which adds complexity to the update process.

Beau

Prepar3D Software Engineer"

CYVR LSZH 

http://f9ixu0-2.png
 

Posted

Regarding the OP:

 

Visibiltiy distance: plz fix the fake low rez distant terrain @ high altitude

 

Realistic haze: plz make HDR Haze more gradual than abrupt.

 

Sky: plz, make dawn and twilight more realistic, remove the orange juice sky horizon opposite to the sun.

 

Otherwise it is perfect for me.

 

Remember: Visibility, Haze and Sky. Visibilitty, Haze and Sky. Visibiltity, Haze and Sky.

 

Uh, what did i said?

 

Visibility, Haze and Sky. Visibilitty, Haze and Sky. Visibiltity, Haze and Sky....

 

:rolleyes:

Posted

Wasnt 3rd party comment. Here is a quote directly from P3D website. just search 64 bit.

Its a goal to have, but not short term.

 

"

We would love to have true 64bit support, but this isn't a feature we can rush. We're dealing with a massive baseline that has been in development since 1977. The first MS version was in 1982, but even that was a year before I was born. Obviously the baseline has been updated and refactored many times, but there are still snippets of assembly code and 32bit pointer math floating around in there, which adds complexity to the update process.

Beau

Prepar3D Software Engineer"

 

I guess I am too literal, but I don't see anything in there that says they are actively working to implement 64bit right now or even soon. In fact, its a pretty bland and generic statement that could equally have been put out to a question about the desirability of sharks with laser beams on their heads. :lol:

 

We would love to have sharks with laser beams on their heads, but this isn't a feature we can rush.
We are all connected..... To each other, biologically...... To the Earth, chemically...... To the rest of the Universe atomically.
 
Devons rig
Intel Core i5 13600K @ 5.1GHz / G.SKILL Trident Z5 RGB Series Ram 64GB / GIGABYTE GeForce RTX 4070 Ti GAMING OC 12G Graphics Card / Sound Blaster Z / Meta Quest 2 VR Headset / Klipsch® Promedia 2.1 Computer Speakers / ASUS ROG SWIFT PG279Q ‑ 27" IPS LED Monitor ‑ QHD / 1x Samsung SSD 850 EVO 500GB / 2x Samsung SSD 860 EVO 1TB /  1x Samsung - 970 EVO Plus 2TB NVMe /  1x Samsung 980 NVMe 1TB / 2 other regular hd's with up to 10 terabyte capacity / Windows 11 Pro 64-bit / Gigabyte Z790 Aorus Elite AX Motherboard LGA 1700 DDR5
Posted

Sky: plz, make dawn and twilight more realistic, remove the orange juice sky horizon opposite to the sun.

 

I have strong reasons to believe that they're going to improve that in X-Plane 10.30.

 

Sky: plz, make dawn and twilight more realistic, remove the orange juice sky horizon opposite to the sun.

 

This can be changed pretty easily, sky colors are just a texture.

You could try one of these modified skycolors:

 

http://forums.x-plane.org/index.php?app=downloads&showfile=18494

http://forums.x-plane.org/index.php?app=downloads&showfile=17312

http://forums.x-plane.org/index.php?app=downloads&showfile=17336

http://forums.x-plane.org/index.php?app=downloads&showfile=15606

 

Marco

"Society has become so fake that the truth actually bothers people".

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...