Jump to content

Sign in to follow this  
tarere

Prepar3D v3.2 is out !

Recommended Posts

Doubt that it's true, but keep my fingers crossed anyway

 

Well just a quick look need to look into it deeper you need it but not as much I tried 2x in NI and 2x in P3D and I am not seeing much of a difference so thats a step in the right direction - need to do some more tests 

 

This was with Carenado best for testing - if you never leave the VC then yes you can do without NI its looks great inside but I spend a lot of time outside  :wink:


Rich Sennett

               

Share this post


Link to post

Chris, just to confirm...no more issues now with NE in 3.2?  I've been wanting to buy your products for the past couple months now but have been waiting til whatever issue was happening to get resolved.  Seems to me it is now, right?  So once ASN is ready, I will make the upgrade and do some night flying with NE!!

Hi Kevin,

i assure you all issues were ironed out in 3.2 as far as NE goes,

we've been working closely (myself included) with LM Dev team to resolve these issues;

and will continue our joined effort to deliver as real as a night environment can get,

this area was somewhat neglected over the years; with both teams efforts to improving night flights;

i believe we will (we already do :)) the best night experience one can get in P3D,

there is still allot to come from us when it comes to night time environment; we haven’t said the last word just yet :smile:

  • Upvote 1

Share this post


Link to post

hi Moe,

yes there are several options out there today; but there's only one original, that’s Night Environment!

we usually disable all third party lights when NE region is active.

 

 

so this is not a mix of several vendors; this is just NE on its own merits!

no diluted lights or disabled libraries or anything to just get it to work in a basic form, and NO SLIDE SHOW ever!!!

 

 

 

Thanks Chriss.

 

Guess i have to Test Danmark or sweden if present with my UTX roads

 

Michael Moe

  • Upvote 1

Michael Moe

 

fs2crew_747_banner1.png

Banner_FS2Crew_Emergency.png

Share this post


Link to post

Hi Kevin,

i assure you all issues were ironed out in 3.2 as far as NE goes,

we've been working closely (myself included) with LM Dev team to resolve these issues;

and will continue our joined effort to deliver as real as a night environment can get,

this area was somewhat neglected over the years; with both teams efforts to improving night flights;

i believe we will (we already do :)) the best night experience one can get in P3D,

there is still allot to come from us when it comes to night time environment; we haven’t said the last word just yet :smile:

Thanks, Chris!  Sounds great!!! As I said a few posts up, just waiting for ASN(Can't fly without that) and then I'll be purchasing.  Can't wait to have a real night flying experience!!!!

  • Upvote 1

Regards,

 

Kevin LaMal

"Facts Don't Care About Your Feelings" - Shapiro2024

Share this post


Link to post

FSUIPC has been updated for P3D 3.2

 

http://forum.simflight.com/topic/80977-updated-modules/#entry488726

 

Version 9.949h


Jim Barrett

Licensed Airframe & Powerplant Mechanic, Avionics, Electrical & Air Data Systems Specialist. Qualified on: Falcon 900, CRJ-200, Dornier 328-100, Hawker 850XP and 1000, Lear 35, 45, 55 and 60, Gulfstream IV and 550, Embraer 135, Beech Premiere and 400A, MD-80.

Share this post


Link to post
Guest

Don't really understand some of these negative comments about V3.2 ... it's a free update, why not try it and come to your own conclusions?    Backup your existing P3D if concerned.  There have been numerous threads on better performance, better visuals, fixed bugs, etc. etc. but you'll need to dig deeper than what the "current thread" page displays.

 

It does baffle me at why some of you are extremely positive for another product that doesn't exist yet and has only posted two screenshots, yet a product that is here and now you don't want to update?  It's almost as if you don't want to see P3D improvements?  Very strange indeed.

 

Anyway, main reason for my post, looks like Virtuali (Umberto) has full support for V3.2 now, so GSX, FSDT, FB, etc. should all be good to go in P3D V3.2.

 

Cheers, Rob.

Share this post


Link to post

AVSIM Noel member mentioned he didnt think SGSS may not be needed anymore - have not tested it yet - fyi

 

No more SGSS in NI and "light" settings in P3D  :-)

http://imageshack.com/a/img924/7875/5IdFzq.jpg

http://imageshack.com/a/img924/8820/Ms92X3.png

http://imageshack.com/a/img921/5572/Zr7J5a.png


Best regards,
David Roch
Intel 9900K@5.1, Asus Maximus XI Formula, 32Gb G.Skill Trident-Z 4133 CL17, EVGA GeForce RTX 3090 FTW3 ULTRA GAMING 1800 MHz, 3x SSD Samsung 970 Pro M.2, Corsair 1600W PSU & 49" Samsung curved 4K TV monitor@30Hz.

Share this post


Link to post

Don't really understand some of these negative comments about V3.2 ... it's a free update, why not try it and come to your own conclusions?    Backup your existing P3D if concerned.  There have been numerous threads on better performance, better visuals, fixed bugs, etc. etc. but you'll need to dig deeper than what the "current thread" page displays.

 

It does baffle me at why some of you are extremely positive for another product that doesn't exist yet and has only posted two screenshots, yet a product that is here and now you don't want to update?  It's almost as if you don't want to see P3D improvements?  Very strange indeed.

 

Anyway, main reason for my post, looks like Virtuali (Umberto) has full support for V3.2 now, so GSX, FSDT, FB, etc. should all be good to go in P3D V3.2.

 

Cheers, Rob.

+1


José Luís
 
| Flightsimulator: MSFS 2020 | Prepar3D 5.0 (HF2) | X-Plane 11.50 | Weather Engine: ActiveSky & ASCA | ENVTEX & ENVSHADE |  Add-Ons: A2A Accu-sim Bonanza | Majestic Software MJC8 Q400 PRO | Maddog X MD-82 base | PMDG 737 NGXu Base & 600/700 Expansion | FSLabs A320-X Base & A319-X expansion | Tools: SimToolkitPro | Reality XP GTN 750 | FFTF Dynamic | ProATC-X | GSX Level 2 Expansion  |
 
 

Share this post


Link to post

i agree with both Rob and Jose,

3.2 is a superb update! whats to think about?

  • Upvote 1

Share this post


Link to post
Guest

No more SGSS in NI and "light" settings in P3D

 

Agree, in V3.2 4X MSAA looks better than 8X MSAA in V3.1 ... shadows are MUCH improved also, very sharp/clear ... far fewer long frames even at extreme graphics settings with 150 add-ons in 4K.

 

Cheers, Rob.

Share this post


Link to post

 

Are you saying you like it ? - I went back to NI 4SGSS - but am going to try your settings

 

Heads up - read this in LM forums

 

Reverted default scenario weather to Fair Weather from Cold Fronts to prevent wind from pushing aircraft to the right

 

So all you need to do is set a fair weather in start up screen and and hit save give it a name - I called it default and then save it now will retain fair weather

 

Rob well said - spot on 


Rich Sennett

               

Share this post


Link to post

After one hour flying I can only see improvements.

But it's difficult to talk about smoothness or impact on fps so far, ASN, ORBX and GTN being disabled for the moment.

The only glitch is with EZCA (what a surprise!)

Some effects seem to be broken and it's impossible now to pan using EZCA and my joystick.

It's like frozen.

Any help would be very much appreciated, this software is giving me hiccups for years but difficult to fly without!

Thanks.

 

Are you saying you like it ? - I went back to NI 4SGSS - but am going to try your settings

Yes Richard, I really do.

Same settings few hours (and a version) ago was just looking like a bad Picasso.

I really believe there is a huge improvement on AA with this version.

More tests to come! ;-)


Best regards,
David Roch
Intel 9900K@5.1, Asus Maximus XI Formula, 32Gb G.Skill Trident-Z 4133 CL17, EVGA GeForce RTX 3090 FTW3 ULTRA GAMING 1800 MHz, 3x SSD Samsung 970 Pro M.2, Corsair 1600W PSU & 49" Samsung curved 4K TV monitor@30Hz.

Share this post


Link to post

Yes Richard, I really do.

Same settings few hours (and a version) ago was just looking like a bad Picasso.

I really believe there is a huge improvement on AA with this version.

More tests to come! ;-)

 

Awesome Dave

 

I dont have ezca loaded - using simplecam suits my needs much easier to setup views - only thin I miss from ezca is that great feeling of floating - accu-feel helps but not the same


Rich Sennett

               

Share this post


Link to post

After one hour flying I can only see improvements.

But it's difficult to talk about smoothness or impact on fps so far, ASN, ORBX and GTN being disabled for the moment.

The only glitch is with EZCA (what a surprise!)

Some effects seem to be broken and it's impossible now to pan using EZCA and my joystick.

It's like frozen.

Any help would be very much appreciated, this software is giving me hiccups for years but difficult to fly without!

Thanks.

 

 

Yes Richard, I really do.

Same settings few hours (and a version) ago was just looking like a bad Picasso.

I really believe there is a huge improvement on AA with this version.

More tests to come! ;-)

This sounds like wonderful news, look forward to seeing your results


My youtube channel

http://www.youtube.com/c/Dkentflyer

 

Share this post


Link to post

I sincerely barely understand how people can complain.

LOL! Oh come now David - you've been around the block a few times - SOME people will always complain, no matter what.

 

Enjoy!

 

Vic


 

P3D#1 - 7700K 5.0g ROG X270F 3600 15-15-15 - EVGA RTX 2080ti 1000W PSU 1- 850G EVO SSD, 2-256G OCZ SSD, 1TB,HAF942-H100 Water W1064Pro
40" 4K Monitor 3840x2160 - AS16, ASCA, GEP3D, UTX, Toposim, ORBX Regions, TrackIR
P3D#2 - 3770K 4.7g Asus Z77 1600 7-8-7 GTX1080ti DH14 850W 2-1TB WD HDD,1tb VRap, Armor+ W10 Pro 2 - HannsG 28" Monitors
 

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    34%
    $8,535.00 of $25,000.00 Donate Now
×
×
  • Create New...