May 28, 201610 yr Getting close to the end of the sale. I got Pago Pago and NA Landclass. Good choice there, another one if you got cash left over and your into ga flying and like challenging airports to land with slope runways etc take a look at tap tapini I7-8700k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,, gtx 1080ti Card, RM850 power supply Peter kelberg
May 28, 201610 yr I'm gonna finally pull the trigger on SoCal (yeah, I know - but I haven't been flying) and L70 to go with it. Probably get trees as well and maybe one more airport.Last sale I picked up Eagle and Sedona hoping it get me flying again and I still haven't installed them, and I've only flown into Palm Springs a few times, but hey... I know I'll get going again "Real Soon Now" so it's an investment. Right?Right?!Scott Socal is nice...even without custom airports. LA is hard on frames and VAS both but I really enjoy the rest of it. Santa Barbara, Santa Maria both are more than sufficient to enjoy even without the full treatment. Even Paso Robles is passable. I'll be curious what you think about Agua Dulce. Up north, I would have hoped we would have Arcata or Napa by now...sigh. Gregg Seipp "A good landing is when you can walk away from the airplane. A great landing is when you can reuse it." i9 64GB RAM, GTX-5090
May 28, 201610 yr Hi Rob, I was the guy who asked about the 737 capable ORBX airports awhile back. I was beginning to believe I had somehow offended ORBX airport lovers by asking that question until you provided your wonderfully detailed answer on the subject. I am now the happy owner of almost all of the airports you listed (including PAKT, PAJN and ESSA that you mentioned at the bottom of your post). I have only skipped the Aussie ones (I do not have the Australian Region) and KSEZ. Thanks - I appreciated your input.
May 29, 201610 yr Good choice there, another one if you got cash left over and your into ga flying and like challenging airports to land with slope runways etc take a look at tap tapini I second this, if you fly GA, Tapini is a MUST! It's in my top two airports (Pago Pago as well)! Curious, are there's others like Tapini with such challenging backwoods/sloped airports? Allen, flight sim lover and AA-5 Traveler owner
May 29, 201610 yr second this, if you fly GA, Tapini is a MUST! It's in my top two airports (Pago Pago as well)! Curious, are there's others like Tapini with such challenging backwoods/sloped airports? No havnt come across any of the sloped runways as per the tapini package, yep I do agree with you its a must if you like challenging airports I7-8700k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,, gtx 1080ti Card, RM850 power supply Peter kelberg
May 29, 201610 yr Curious, are there's others like Tapini with such challenging backwoods/sloped airports? The OrbX Jacksons AYPY package which came before Tapini has about ten strips of that kind and there is a bonus freeeware Emo that you got to download separately. Some are featured in my PIREPS here (look at the hard day series Kagi, Emo, Efogi, Kokoda ) : http://strips.proboards.com/board/5/pireps Dominique Simming since 1981 - [email protected] GHz with 16 GB of RAM and a 1080 with 8 GB VRAM running a 27" @ 2560*1440 - Windows 10 - Warthog HOTAS - MFG pedals - MSFS Standard version with Steam
May 29, 201610 yr I got SCA yesterday and partially regret my purchase. Very hard on my system Cheers N.-
May 29, 201610 yr I got SCA yesterday and partially regret my purchase. Very hard on my system Try flying up away from LA. It's really nice up around, Oxnard, Santa Barbara and north. Gregg Seipp "A good landing is when you can walk away from the airplane. A great landing is when you can reuse it." i9 64GB RAM, GTX-5090
May 29, 201610 yr Try flying up away from LA. It's really nice up around, Oxnard, Santa Barbara and north. Santa Barbara is OK. L45 is a bit hard, i don't know why. All this with clear skys... I also own NCA and i have no problem flying the SF bay.. that's why i pulled the trigger Cheers N.-
May 29, 201610 yr I got SCA yesterday and partially regret my purchase. Very hard on my system Try flying up away from LA. It's really nice up around, Oxnard, Santa Barbara and north. It is important in SCA to dumb down the sliders a little, chiefly (for me) the air traffic to help the fluidity. A high LAX and local airports traffic can kill my frame rate but I can fly the special VFR route from Santa Monica over LAX with a weaker air traffic. San Diego CBD/airports can be quite difficult though. Also, the more you fly to the North or East of the LA basin, the smoothier your flying experience will be, even in urban areas (e.g. from Redlands to Aqua Dulce, over Hollywood). A last, SCA has a huge desert area (look at the kmz map) which is really well designed and a joy to fly. Get yourself the 29Palms airport as a hub. I flew tens of hours with the L39 or P51 over the red desert even in heavy weather and it was 100% smooth ! Dominique Simming since 1981 - [email protected] GHz with 16 GB of RAM and a 1080 with 8 GB VRAM running a 27" @ 2560*1440 - Windows 10 - Warthog HOTAS - MFG pedals - MSFS Standard version with Steam
May 29, 201610 yr The OrbX Jacksons AYPY package which came before Tapini has about ten strips of that kind and there is a bonus freeeware Emo that you got to download separately. Some are featured in my PIREPS here (look at the hard day series Kagi, Emo, Efogi, Kokoda ) : http://strips.proboards.com/board/5/pireps Hey, thanks, will check out AYPY for sure! Loved your PIREPS btw, didn't even know that site existed. Allen, flight sim lover and AA-5 Traveler owner
May 30, 201610 yr I'm hoping someone can shed some light on a purchase I have just made. Just bought Tapini(TAP),installed it, but not seeing the Runway. I see a sign saying Welcome To Tapini in stones, but right next to the CS377 aircraft I opted for is a huge hill texture(see image). Do I have to also purchase FTX Global Base for this to work? Looks nothing like some images I saw in the afore-mentioned PIREPS, which made me go for it. Rick Almeida
May 30, 201610 yr I'm guessing you need different mesh. Fortunately they have freeware Holgermesh for PNG on their site. https://fullterrain.com/freeware
May 30, 201610 yr Thanks a bunch, Waterman981. I wasn't even aware of that mesh. Heading over there right now to get it. Rick Almeida
May 30, 201610 yr I just downloaded and installed ORBX South CA. Some thing is not correct. Please see screenshot KSAN area. Does not looking right. http://imagizer.imageshack.us/v2/1600x1200q90/923/F7gsOy.jpg I fixed the problem. Ahmet Sanal "Time you enjoyed wasting, was not wasted"
Create an account or sign in to comment