October 12, 20178 yr 2 hours ago, jcomm said: Did you test the trim tabs with dynamic pressure too ? It's a mix: 1) the control surfaces, at least in the C90, stay put, but if you output the deflection data you can see them moving as soon as relative wind turns positive ( or negative ). 2) Probably also a bit overdone, because you transition from 0 º deflection to growing values with even a 1 knot wind... but with fine tuning, just like everything, it's a nice start... Yes, it seems quite abrupt in the current version. As I previously said, deflection due to airflow is purely eye-candy, because in flight there is no difference. With a very important exception though: the elevator deflection due to changing flap settings, influencing the trim change required when moving flaps. This is modeled in the DCS P51, but it's so aircraft specific that it's impossible to model at a general level, and must be modeled on a per-aircraft basis. "Society has become so fake that the truth actually bothers people".
October 12, 20178 yr Those Simheaven VFR sceneries are referencing to objects outside the current scenery directory ( ../<library path> ) , something that Ben is calling bad design and is apparently not allowed anymore. The links are found in library.txt in the simheaven scenery directory.
October 12, 20178 yr 1 hour ago, Murmur said: Yes, it seems quite abrupt in the current version. As I previously said, deflection due to airflow is purely eye-candy, because in flight there is no difference. With a very important exception though: the elevator deflection due to changing flap settings, influencing the trim change required when moving flaps. This is modeled in the DCS P51, but it's so aircraft specific that it's impossible to model at a general level, and must be modeled on a per-aircraft basis. And in their Spitfire IX too :-) Didn't test it in XP11, but it could also be done since Austin calculates the downwash angle variation, and its even displayed... Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
October 12, 20178 yr Hello everyone, tried XP11.10b1 and I'm not happy with the new slipstream model. the default Cessna 172 now pulls to the right in the air. As does my airplane I'm working on. But I'm pretty sure single prop airplane with a clockwise turning prop(as seen from the cockpit) should pull to the left. Due to prop torque, spiraling slipstream and p factor. -Marcus
October 12, 20178 yr 1 hour ago, marcus11 said: Hello everyone, tried XP11.10b1 and I'm not happy with the new slipstream model. the default Cessna 172 now pulls to the right in the air. As does my airplane I'm working on. But I'm pretty sure single prop airplane with a clockwise turning prop(as seen from the cockpit) should pull to the left. Due to prop torque, spiraling slipstream and p factor. -Marcus Yep Marcus, it appears to me something's wrong - all default prop aicraft I tried, C172 and B58 exhibit this right rolling tendency, even at max power, inflight. It continues even if we edit the aircraft in Plane Maker and set the ground adjustable trim tabs to 0º for rudder and aileron. This is in XP11.10b1 Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
October 12, 20178 yr 11 hours ago, Colonel X said: How was your performance? Ops, I missed your post! Apparently similar to 11.05, maybe lower. But I have a very low end notebook so it's hardly significant. "Society has become so fake that the truth actually bothers people".
October 12, 20178 yr From the release notes it looks like Austin made a lot of changes based on his Lancair Evolution - maybe not the best test platform for small GA single recips hehe? | My Liveries | FAA ZMP | PPL ASEL | | Windows 11 | MSI Z690 Tomahawk | 12700K 4.7GHz | MSI RTX 4080 | 64GB 6000 MHz DDR5 | 500GB Samsung 860 Evo SSD | 2x 2TB Samsung 970 Evo M.2 | EVGA 850W Gold | Corsair 5000X | HP G2 (VR) / LG 27" 1440p |
October 12, 20178 yr 2 hours ago, jcomm said: Yep Marcus, it appears to me something's wrong - all default prop aicraft I tried, C172 and B58 exhibit this right rolling tendency, even at max power, inflight. It continues even if we edit the aircraft in Plane Maker and set the ground adjustable trim tabs to 0º for rudder and aileron. This is in XP11.10b1 I just installed 10b1 did a quick flight in 172 G1000 out KSEA. Mine pulled to the left as expected. Very odd. Life time flight sim enthusiast, current airplane owner 172P (past C182F). FAA CP/IR ASEL/AMEL, FI ASELMy System: AMD Ryzen 9 9950X3D , MSI X870 GAMING PLUS, 64G RAM, ASUS RTX5090, 4T SSDPut my hands on (pic/dual/given)7GCAA, 8KCAB, BE24, BE76, BE35-C33, BE35, C150, C152, C172B/N/P/R/SP, 182F, M20E,M20C, M20J, AT6(SNJ4), PA28-140,PA28-151, PA28-161,PA28-181,PA28RT-201,PA28R-180/201T, PA24-250, PA32-300R, PA44, AC114, YAK-18T, YAK-52, SR22
October 12, 20178 yr 3 hours ago, jcomm said: Yep Marcus, it appears to me something's wrong - all default prop aicraft I tried, C172 and B58 exhibit this right rolling tendency, even at max power, inflight. It continues even if we edit the aircraft in Plane Maker and set the ground adjustable trim tabs to 0º for rudder and aileron. This is in XP11.10b1 Yep, the 172 is exhibiting a slight roll to the right witch is not correct. Time to file a bug and shoot Austin a email ! AMD Ryzen 7 5800X3D, RTX 4080S, Ram - 32GB, 32" 4K Monitor, WIN 11. Eric Escobar
October 12, 20178 yr 56 minutes ago, ryanbatcund said: From the release notes it looks like Austin made a lot of changes based on his Lancair Evolution - maybe not the best test platform for small GA single recips hehe? Now, I know it's only beta 1, but after such a big change in the flight model, I would have expected at least a test flight on the default prop aircrafts, before releasing the modified FM. Maybe Ben and the rest of the coders at LR should give Austin some hints on how to implement better quality control. No excuse for sloppy quality control now that they have a German in the team. "Society has become so fake that the truth actually bothers people".
October 13, 20178 yr 5 minutes ago, Murmur said: Now, I know it's only beta 1, but after such a big change in the flight model, I would have expected at least a test flight on the default prop aircrafts, before releasing the modified FM. Maybe Ben and the rest of the coders at LR should give Austin some hints on how to implement better quality control. No excuse for sloppy quality control now that they have a German in the team. I think Austin needs some one on one time in a 172 with the German instructor ! AMD Ryzen 7 5800X3D, RTX 4080S, Ram - 32GB, 32" 4K Monitor, WIN 11. Eric Escobar
October 13, 20178 yr 7 minutes ago, jt8d9a said: How do i get rid of the message regarding the sim speed?? Press (Ctrl T) a bunch of times... AMD Ryzen 7 5800X3D, RTX 4080S, Ram - 32GB, 32" 4K Monitor, WIN 11. Eric Escobar
October 13, 20178 yr 4 minutes ago, strider1 said: Press (Ctrl T) a bunch of times... Thanks! Regards Nils
Archived
This topic is now archived and is closed to further replies.