July 2, 20205 yr Update:OK, after several attempts 😉 - PC Hardware: AMD Ryzen 9 9950X3D // Asus ROG Crosshair X870E HERO // 2x32Gb Corsair Dominator Titanium DDR5 6000MT/s CL30 // ASUS ROG Strix GeForce RTX 4090 OC Edition // 4Tb Corsair NVMe M.2 MP600 // Corsair 1600W PSU Samsung Odyssey Arc 55" curved 165 Hz monitor. - Simulator Hardware: VIRPIL Constellation Alpha Prime + VIRPIL VPC Universal Control Panel - #3 + MOZA AY210 Force Feedback Yoke + WINWING URSA MINOR 32 Throttle & PAC Metal + WINWING SKYWALKER Metal Rudder Pedals + WINWING Airbus FCU & EFIS + WINWING Boeing 3N PAP + WINWING MCDU-32 + WINWING PFP-4 + WINWING PFP 3-N + WINWING PFP-7.
November 5, 20205 yr Commercial Member Hi to all, FFTF Dynamic P3Dv5 Version 5.1.8.26742 (November 2020) P3Dv5 Version 5.1 compatibility Enjoy. Achilles Flight Simulator Plaform Solutions
November 22, 20205 yr 2 hours ago, brosss said: Hi, is FFTF Dynamic compatible with P3D v5.1 HF1? I've been using it with no problem. Vic green
November 22, 20205 yr By my side, the program running, but i don't think it is working correctly, just as with P3D v 5.1 (without hot fix). Using AGL Scenario and changing the FFTF value does nothing with FPS. Regards, Bartek Staniszewski
November 23, 20205 yr @GSalden: Good Morning Gerard. I am thinking about purchasing FFTF again (have the prior version for P3D V4.....never updated from myside). Can you confirm that it is working correctly for you with no issues (P3D V5.1HF1)? I will use it with VR. Unlimited Frames, TB off and within FFTF using AGL Mode. This should work. I just tested my FPS and Frametimes with VR by implementing a FFTF in the MAIN Section of my P3D.CFG file. Value 0.10 does indeed bring me more smooth experience. Frames seem more stable and less fluctuating and with F22 low level (max 3000FT) at 600Knots above ground I get no blurries (aka extremer scenario which I will not use with airliners at all......;-) I thought you use FFTF. Some user here report it is working, some report it seems not working correctly. Is it working for you? Thanks for any feedback on this..... Marcus Edited November 23, 20205 yr by mpo910 Regards, Marcus P.
November 23, 20205 yr Never fly without it a must for airports, sit at a high detail addon airport then start FFTF and you will see the FPS increases. Raymond Fry.
November 23, 20205 yr 49 minutes ago, mpo910 said: @GSalden: Good Morning Gerard. I am thinking about purchasing FFTF again (have the prior version for P3D V4.....never updated from myside). Can you confirm that it is working correctly for you with no issues (P3D V5.1HF1)? I will use it with VR. Unlimited Frames, TB off and within FFTF using AGL Mode. This should work. I just tested my FPS and Frametimes with VR by implementing a FFTF in the MAIN Section of my P3D.CFG file. Value 0.10 does indeed bring me more smooth experience. Frames seem more stable and less fluctuating and with F22 low level (max 3000FT) at 600Knots above ground I get no blurries (aka extremer scenario which I will not use with airliners at all......;-) I thought you use FFTF. Some user here report it is working, some report it seems not working correctly. Is it working for you? Thanks for any feedback on this..... Marcus Hi Marcus, It is working as it should. My 3090 can handle it all without a FTFF value ( so the default 0.33 ) but I am using FTFF Dynamic to get those extra framerates at heavy airports and with rainy weather. regards, Gerard 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
November 23, 20205 yr 2 hours ago, GSalden said: Hi Marcus, It is working as it should. My 3090 can handle it all without a FTFF value ( so the default 0.33 ) but I am using FTFF Dynamic to get those extra framerates at heavy airports and with rainy weather. regards, Gerard Great. I bought it, installed it and use it right now. Seems working like a charm. Thanks for your advise! I use it with AGL 0 - 8000 and FFTF value 0.05 - 0.12 (I tested it at 2000 Feet with F22 at 600knots at EDDF area and 0.10 gave me now blurries and good FPS rate. So it seems ok to me to decrease the lower value further down as I assume that below 8000 feet most scenery is already loaded on approach........so 0.05 should be ok. But as it is "on the fly" adjustable....I can crank it up if it´s needed till I found the right value. Marcus Regards, Marcus P.
November 23, 20205 yr So the problem seems to be my side. Can you please confirm, you are using FFTF Dynamic ver. 5.1.8.26742 on Prepar3D ver. 5.1.12.26829? Regards, Bartek Staniszewski
November 23, 20205 yr I'm on P3DV5.1 HF1. FFTF Toll shows everything correctly but does not change in the Sim for me. No matter what I set, nothing changes in the Sim. I'm using the alt scenario. No matter what value I set, I see no change in the frames. At this Time i use the latest Version ! Frank Edited November 23, 20205 yr by f.skywalker WIN 11 64 Pro, Gigabyte Z790 Aorus Elite AX, I7 13700K, be-quiet Loop Silent 2 WK, RTX 4080 S, 64 GB DDR5 Kingston Fury Beast EXPO, 4x Nvme Samsung PRO, MS2024, be quiet SP11 850 Watt
November 23, 20205 yr 34 minutes ago, f.skywalker said: No matter what value I set, I see no change in the frames. Same here. In previous versions of P3D i was blocking frames at 120 (internal in P3D) and using different FFTF range i was able to see the result in FPS. Now it's not working that way. Regards, Bartek Staniszewski
November 23, 20205 yr 2 hours ago, brosss said: So the problem seems to be my side. Can you please confirm, you are using FFTF Dynamic ver. 5.1.8.26742 on Prepar3D ver. 5.1.12.26829? Yes, confirmed! Exactly like you wrote Regards, Marcus P.
November 23, 20205 yr Yep doesn't look like it's working I'm getting stutters in airports... Shom MSFS2024 running on Win 11, 4K screen, Z790 AORUS ELITE AX-W, i9-14900K, MSI 3080Ti, Corsair 2x32GB 6000 MHz, 1+2TB M.2 NVMEs
November 23, 20205 yr FFTF 5.1.8.26742 P3D V5.1 HF1 FFTF do not has any effect on frame rate, neither in the altitude mode nor in frame rate mode. Ruediger
Archived
This topic is now archived and is closed to further replies.