June 25, 20205 yr Pretty consistent. Have done a full re-install, but have not disabled addons yet. Anyone else seeing hangs on exit which often need a task manager touch to close the P3d executable. Also makes it come up in a minimized screen when restarting. Anyone Else? TIA, -Braun
June 25, 20205 yr can you check your Windows Event Viewer log? Is there an Error entry fort the time when P3D starts hanging?
June 25, 20205 yr Same here. I believe the problem is caused by Flight1 GTN Complete. The event viewer says the problem is from GTN Simulator.exe System Specs: Ryzen 9 5900X, Gigabyte Aorus Master mobo, 32 Gb Corsair Vengeance Lpx DDR4 memory, MSI RTX 3070 Ti Gaming X Trio 8G video card.
June 25, 20205 yr Author Looked in the EV. Only app errors I saw were for GTN-750 Complete, the new 2.20 ver released for HF2. removed GTN and P3D HF2 hang on close is also gone. thanks for the tip -Braun
June 25, 20205 yr Author 3 minutes ago, ghislain said: Same here. I believe the problem is caused by Flight1 GTN Complete. The event viewer says the problem is from GTN Simulator.exe Ghislain we posted at the same time. I concur. GTN -750 -Braun
June 25, 20205 yr 2 hours ago, btacon said: Pretty consistent. Have done a full re-install, but have not disabled addons yet. Anyone else seeing hangs on exit which often need a task manager touch to close the P3d executable. Also makes it come up in a minimized screen when restarting. Anyone Else? TIA, -Braun Same here. - Harry 9800x3D (Strix x870e-E) - 64GB RAM (DDR5 6000, CL 30) - RTX 5090, 34'' 1440p OLED HDR - Windows 11 Pro (1TB M.2) - MSFS 2024 (MS Store, 4TB M.2).
June 25, 20205 yr I can concur that I'm having the same problem with the 650/750. All the problems with the F1 GTNs lately are really pushing me towards RXP... I already got their GNS 430 & 530 and they've been flawless.🙃 Tired of Streetlights everywhere? Try MSFS DarkStreets today!
June 26, 20205 yr send the error reports to the developers, they will help them to figure out what causes the crash
June 26, 20205 yr 16 hours ago, btacon said: Pretty consistent. Have done a full re-install, but have not disabled addons yet. Anyone else seeing hangs on exit which often need a task manager touch to close the P3d executable. Also makes it come up in a minimized screen when restarting. Anyone Else? TIA, -Braun Same problem for me. I use Flight1 GTN 650/750 cpl as well Jac PC Specs: /MoBo: Asus Rampage V Extreme/CPU: Intel ® Core i7 5930k @ 3.5 Ghz OC 4.2 Ghz/CPU Cooling: Hydro series H100i / RAM: 32GB DDR4 2400MHz/ SSD: 4x Samsung SSD 850 PRO 512 GB/SSD: 1x Samsung SSD 970 EVO 1TB M.2 /PSU: Corsair RM 850 /GPU: NVidia Geforce RTX 2080 Ti OC 11 GB (Asus ROG STRIX Gaming) /Monitor: Asus ROG 348Q Res, 3440x1440 / OC 100 Hz /OS: Windows 10 Professional 64 bit - Version Build 19041 FlightSim: P3Dv5 HF2 & MSFS 2020 Hardware: Yoko Yoke+ ; Yoke TQ6+
June 26, 20205 yr No problem on my setup. P3Dv5HF2 closes down within 5 seconds / (P3Dv4.5HF3) takes maybe 9 seconds. I use Flight1 GTN Complete and Ezdok also in both sims. Best Regards, Vaughan Martell PP-ASEL KDTW
June 26, 20205 yr 29 minutes ago, vonmar said: No problem on my setup. P3Dv5HF2 closes down within 5 seconds / (P3Dv4.5HF3) takes maybe 9 seconds. I use Flight1 GTN Complete and Ezdok also in both sims. Same here, although I use Chaseplane instead. There must be some other factor causing the issue. Wayne KlocknerUnited Virtual
June 26, 20205 yr Author Interesting on the two last posts with a working GTN setup. Enough are experiencing this that I’m sure it will get sorted. In the meantime, I’ve switched back to RXP GTN 750. I had bought it some time back but did not grow fond of it, and I went back to my trusty F1 Complete. I did not grow fond of RXP because I did not RTFM. Now that I have RTFM, I am rapidly growing quite fond of it and I am sure I will finally retire my long time friend of many iterations, F1 GTN -Braun
June 26, 20205 yr Moderator I also had the hang after installing the latest F!GTN. Vic RIG#1 - I9 14900K MSI Pro z790 RTX 5070Ti 40" 4K Monitor 3840x2160
June 26, 20205 yr 6 minutes ago, vgbaron said: I also had the hang after installing the latest F!GTN. Vic Same here when I run F1 G600+GTN750. Bert
June 26, 20205 yr 12 minutes ago, Bert Pieke said: Same here when I run F1 G600+GTN750. I have both installed and no hang up on exiting P3Dv5HF2. But, I cannot get the G600 Pop Up to work so maybe that will cause the delay when I figure out what's wrong with the G600 pop up: https://www.simforums.com/forums/g600-no-popup-in-p3dv5hf2_topic63883&SID=6965-563zb9f1a989211z7d985199421296.html Best Regards, Vaughan Martell PP-ASEL KDTW
Archived
This topic is now archived and is closed to further replies.