Jump to content

Sign in to follow this  
rwalls

Aerosoft CRJ Available for P3D v5

Recommended Posts

6 minutes ago, Shomron said:

I did not see this listed, can anyone confirm?

[Fixed] Better interception of legs following (INTC) legs

Guess I stand corrected, this doesnt entirely fix the issue (didnt review the whole list in depth though)

  • Like 1

Share this post


Link to post

does aerosoft ever put the pro on sale?


9700k | Maximus XI Hero| 32gb DDR4 3000 | 1080Ti 11GB | 1tb EVO Plus 970 and 500GB M2+3TB HDD | 43" Samsung X60R 4k and 2  22" monitors | Corsair RM750x |  240MM AIO.| MFG Crosswind | T16000M Stick | Saitek Throttle Quad | Skalarki MCDU and FCU | Saitek Radio Panel

Share this post


Link to post
1 hour ago, kaha said:

Any decent tutorials available?

Karl

Chuck's Guides has made a "guide" for it.  That combined with a couple of good Youtube tutorials helped me immensely.

There is one particular Youtube vid where the pilot explains how you can use one of the prediction / progress pages in the FMC to determine your ideal descent rate (fpm) to hit your altitude constraints. 

  • Upvote 1

Rhett

i7-8700k @ 5.0 ghz, 32 GB G.Skill TridentZ, 1080Ti, 32" BenQ, 4K res

Share this post


Link to post

I love chucks guides and would seriously contemplate picking it up at some point.  Price tag a little steep.  Based on everything I see I'd pay 50 for it. 


9700k | Maximus XI Hero| 32gb DDR4 3000 | 1080Ti 11GB | 1tb EVO Plus 970 and 500GB M2+3TB HDD | 43" Samsung X60R 4k and 2  22" monitors | Corsair RM750x |  240MM AIO.| MFG Crosswind | T16000M Stick | Saitek Throttle Quad | Skalarki MCDU and FCU | Saitek Radio Panel

Share this post


Link to post

I was part of the beta team.  We also had several real-world CRJ pilots who provided many inputs, including a few that could be considered nitpicking by some of us, but they were addressed.  Here's the complete change log:

2.2.0.0 Service Pack 1 / Initial P3D v5 version
- [Fixed] Mach number indication in HGS
- [Fixed] Key processing for EFB keypad and number pad accepted too many keys
- [Fixed] P3D window focus gain/loss detection improved
- [Fixed] Better interception of legs following (INTC) legs
- [Fixed] Missing condition for LOC FMA indication to stop flashing
- [Fixed] MDA Alert arm changed from 2500ft to 2500ft above the ground
- [Fixed] CAS advisory messages are no longer unboxed when a message gets cleared
- [Fixed] Rounding error when copying GPS POS to FMS scratchpad on POS INIT page
- [Fixed] Continuous Ignition pushbutton remaining on after stall test is finished
- [Fixed] L/R ENG BLEED CLOSED CAS message no shows when bleed source is APU and left/right engine is running
- [Fixed] L/R PACK FAULT CAS message removed when engines/APU are not running and PACK buttons are pushed in
- [Fixed] OFF light no longer showing when engines/APU are not running and PACK buttons are pushed in
- [Fixed] HDG Sync (and other buttons) now works while FD is off
- [Fixed] DEP Rwy selection can cause an endless loop if SID has been selected before
- [Fixed] Changed MDA Alert to require a descent rate of -250 fpm or less
- [Fixed] DH indicator bar in PFD radio altimeter scale only shows when DH is active on the side panel
- [Fixed] Low speed awareness marker (green line) no longer visible on ground
- [Fixed] Overspeed clacker changed back to loop sound (loop got lost due to prior performance optimization)
- [Fixed] Stick shaker sound shutting itself off during stall as well as stall test
- [Fixed] AP vertical mode switching to ALTS CAP after takeoff
- [Fixed] MDA/DH colors on PFD
- [Fixed] EFB calculations when weight is entered as ZFW
                                 Please note: "Passengers & Cargo" is not synchronized with "Zero Fuel Weight".
                                 Both are meant to be different ways to ENTER data only, they are not supposed
                                 to update currectly with changes made on the other page.
- [Fixed] MDA alert and bar visible when MDA is not active.
- [Fixed] MDA bar color
- [Fixed] DH alert visible when DH is not active
- [Fixed] FD bars not showing after TOGA is pressed
- [Fixed] Approach transitions not showing on ARRIVAL selection page
- [Fixed] Altitude and speed changes on the LEGS page now create a MOD FPLN and require EXEC to become active
- [Fixed] Reduced object jittering and font size "jumping" in HGS
- [Fixed] Flight Path Vector smoothed in P3D v5 (new formula - please give a close look)
- [Fixed] No more chinese text when opening HGS while aircraft is still initializing
- [Fixed] COM radio frequencies messed up in P3D v4.5 version
- [Fixed] Rounding error on lat/lon coordinates (due to rounding changed in VC2019 runtime)
- [Fixed] MCDU 2D windows not refreshing on window resize
- [Fixed] PFD Mach indication changed to native value
- [Fixed] Mixed up flightplans folders for v4.5 and v5.0
- [Fixed] Legs page showing 0 degrees headings (rounding error)
- [Fixed] Stabilizer Trim indication (rounding error)
- [Fixed] Mach to IAS calculation reverted to original Ed Williams formula
- [Fixed] RTU ADF2 tuning: Increasing frequency with inner knob works too now.
- [Fixed] Heading hold overshoot on low speeds
- [Fixed] DOW in FMS PERF INIT page now matches DOW in EFB
- [Fixed] TO/TO pitch commands
- [Fixed] DEP/ARR now leads directly to departure page before and during the first 10 minutes of flight
- [Fixed] Altitude profile calculation with "above" constraint during cruise phase
- [Fixed] Altitude profile calculation with constraint after leg with undefined length (VECT, INTC,...)
- [Fixed] Removed warning message when loading a flightplan with a "VECTORS" transition
- [Fixed] Improved handling of short legs following overfly waypoints
- [Fixed] CTD when trying to create a Direct-to to the FROM waypoint
- [Fixed] Anti-Ice and manual bleed configuration with APU only
- [Fixed] NavDataPro Charts display adapted to server-side changes
 
- [Added] Information text for non-geo-referenced charts
- [Added] Prepar3D v5 support
- [Added] 8.33kHz COM frequency spacing
- [Added] Aircraft weight can now be entered using ZFW and Fuel on the EFB Performance page
- [Added] A number of L-Variables required for FS2Crew
- [Added] Added several aircraft-specific options (as in "settable per registration") on EFB OPTIONS Page 3/3. Different Style FMS DEP/ARR is not implemented yet
- [Added] PFD Low speed awareness indicator now optional per aircraft
- [Added] A new level of nerdiness: Implemented FAA airworthiness directive which required operators to disable TEMP COMP on FMS Defaults page 4/4
- [Added] FS2Crew trigger for ground power and ground air carts
- [Added] Additional control options for use by FS2Crew
- [Added] Autopilot disconnects when both Stab Trim channels are off
- [Added] Thrustmaster TCA Sidestick support (shifted Idle position for throttle slider)
- [Added] ActiveSky P3D support
 
- [Changed] Updated DEP/ARR selection pages to FMS version 4.2
- [Changed] Change-based redrawing of MCDUs (less framerate impact and better input response)
- [Changed] IAS value now calculated using Mach and pressure altitude instead of faulty FSX/P3D IAS value
 
- [Improved] LOC tracking slightly improved
 
- [Updated] Virtual cockpit adapted for new P3D v5 PBR features

Not everything that is known has been fixed, but the developers are continuing to improve it.  

  • Like 2

SAX702

Win 10 Pro || i7-8700K ||  32GB || ASUS Z370-P MB || NVIDIA GeForce GTX 1080 Ti || 960 PRO 1TB, 840 EVO

My Files in the AVSIM Library

Share this post


Link to post

strangely enough I see it was on sale at pc aviator for 54.  just picked it up.  But it's going to the back of the hangar while i play with the FSLabs A320 update


9700k | Maximus XI Hero| 32gb DDR4 3000 | 1080Ti 11GB | 1tb EVO Plus 970 and 500GB M2+3TB HDD | 43" Samsung X60R 4k and 2  22" monitors | Corsair RM750x |  240MM AIO.| MFG Crosswind | T16000M Stick | Saitek Throttle Quad | Skalarki MCDU and FCU | Saitek Radio Panel

Share this post


Link to post
3 hours ago, SAX702 said:

I was part of the beta team.  We also had several real-world CRJ pilots who provided many inputs, including a few that could be considered nitpicking by some of us, but they were addressed.  Here's the complete change log:

2.2.0.0 Service Pack 1 / Initial P3D v5 version
- [Fixed] Mach number indication in HGS
- [Fixed] Key processing for EFB keypad and number pad accepted too many keys
- [Fixed] P3D window focus gain/loss detection improved
- [Fixed] Better interception of legs following (INTC) legs
- [Fixed] Missing condition for LOC FMA indication to stop flashing
- [Fixed] MDA Alert arm changed from 2500ft to 2500ft above the ground
- [Fixed] CAS advisory messages are no longer unboxed when a message gets cleared
- [Fixed] Rounding error when copying GPS POS to FMS scratchpad on POS INIT page
- [Fixed] Continuous Ignition pushbutton remaining on after stall test is finished
- [Fixed] L/R ENG BLEED CLOSED CAS message no shows when bleed source is APU and left/right engine is running
- [Fixed] L/R PACK FAULT CAS message removed when engines/APU are not running and PACK buttons are pushed in
- [Fixed] OFF light no longer showing when engines/APU are not running and PACK buttons are pushed in
- [Fixed] HDG Sync (and other buttons) now works while FD is off
- [Fixed] DEP Rwy selection can cause an endless loop if SID has been selected before
- [Fixed] Changed MDA Alert to require a descent rate of -250 fpm or less
- [Fixed] DH indicator bar in PFD radio altimeter scale only shows when DH is active on the side panel
- [Fixed] Low speed awareness marker (green line) no longer visible on ground
- [Fixed] Overspeed clacker changed back to loop sound (loop got lost due to prior performance optimization)
- [Fixed] Stick shaker sound shutting itself off during stall as well as stall test
- [Fixed] AP vertical mode switching to ALTS CAP after takeoff
- [Fixed] MDA/DH colors on PFD
- [Fixed] EFB calculations when weight is entered as ZFW
                                 Please note: "Passengers & Cargo" is not synchronized with "Zero Fuel Weight".
                                 Both are meant to be different ways to ENTER data only, they are not supposed
                                 to update currectly with changes made on the other page.
- [Fixed] MDA alert and bar visible when MDA is not active.
- [Fixed] MDA bar color
- [Fixed] DH alert visible when DH is not active
- [Fixed] FD bars not showing after TOGA is pressed
- [Fixed] Approach transitions not showing on ARRIVAL selection page
- [Fixed] Altitude and speed changes on the LEGS page now create a MOD FPLN and require EXEC to become active
- [Fixed] Reduced object jittering and font size "jumping" in HGS
- [Fixed] Flight Path Vector smoothed in P3D v5 (new formula - please give a close look)
- [Fixed] No more chinese text when opening HGS while aircraft is still initializing
- [Fixed] COM radio frequencies messed up in P3D v4.5 version
- [Fixed] Rounding error on lat/lon coordinates (due to rounding changed in VC2019 runtime)
- [Fixed] MCDU 2D windows not refreshing on window resize
- [Fixed] PFD Mach indication changed to native value
- [Fixed] Mixed up flightplans folders for v4.5 and v5.0
- [Fixed] Legs page showing 0 degrees headings (rounding error)
- [Fixed] Stabilizer Trim indication (rounding error)
- [Fixed] Mach to IAS calculation reverted to original Ed Williams formula
- [Fixed] RTU ADF2 tuning: Increasing frequency with inner knob works too now.
- [Fixed] Heading hold overshoot on low speeds
- [Fixed] DOW in FMS PERF INIT page now matches DOW in EFB
- [Fixed] TO/TO pitch commands
- [Fixed] DEP/ARR now leads directly to departure page before and during the first 10 minutes of flight
- [Fixed] Altitude profile calculation with "above" constraint during cruise phase
- [Fixed] Altitude profile calculation with constraint after leg with undefined length (VECT, INTC,...)
- [Fixed] Removed warning message when loading a flightplan with a "VECTORS" transition
- [Fixed] Improved handling of short legs following overfly waypoints
- [Fixed] CTD when trying to create a Direct-to to the FROM waypoint
- [Fixed] Anti-Ice and manual bleed configuration with APU only
- [Fixed] NavDataPro Charts display adapted to server-side changes
 
- [Added] Information text for non-geo-referenced charts
- [Added] Prepar3D v5 support
- [Added] 8.33kHz COM frequency spacing
- [Added] Aircraft weight can now be entered using ZFW and Fuel on the EFB Performance page
- [Added] A number of L-Variables required for FS2Crew
- [Added] Added several aircraft-specific options (as in "settable per registration") on EFB OPTIONS Page 3/3. Different Style FMS DEP/ARR is not implemented yet
- [Added] PFD Low speed awareness indicator now optional per aircraft
- [Added] A new level of nerdiness: Implemented FAA airworthiness directive which required operators to disable TEMP COMP on FMS Defaults page 4/4
- [Added] FS2Crew trigger for ground power and ground air carts
- [Added] Additional control options for use by FS2Crew
- [Added] Autopilot disconnects when both Stab Trim channels are off
- [Added] Thrustmaster TCA Sidestick support (shifted Idle position for throttle slider)
- [Added] ActiveSky P3D support
 
- [Changed] Updated DEP/ARR selection pages to FMS version 4.2
- [Changed] Change-based redrawing of MCDUs (less framerate impact and better input response)
- [Changed] IAS value now calculated using Mach and pressure altitude instead of faulty FSX/P3D IAS value
 
- [Improved] LOC tracking slightly improved
 
- [Updated] Virtual cockpit adapted for new P3D v5 PBR features

Not everything that is known has been fixed, but the developers are continuing to improve it.  

I've been trying to stay in the loop.  When is this update going to be released?


Aaron Ortega

Share this post


Link to post

it released today

  • Like 1

9700k | Maximus XI Hero| 32gb DDR4 3000 | 1080Ti 11GB | 1tb EVO Plus 970 and 500GB M2+3TB HDD | 43" Samsung X60R 4k and 2  22" monitors | Corsair RM750x |  240MM AIO.| MFG Crosswind | T16000M Stick | Saitek Throttle Quad | Skalarki MCDU and FCU | Saitek Radio Panel

Share this post


Link to post

So my two notes...

1) You still need to load a default plane in the sim first or the plane will have performance issues.
2) Plane wandered completely off nav track for no apparent reason like it has done so many times before.

Share this post


Link to post
1 minute ago, JasonPC said:

So my two notes...

1) You still need to load a default plane in the sim first or the plane will have performance issues.
2) Plane wandered completely off nav track for no apparent reason like it has done so many times before.

I made 26 flights using the original CRJ X in v5 (unsupported) and never had either of these issues 🤷🏼‍♂️

  • Like 1

Share this post


Link to post
15 hours ago, micstatic said:

does aerosoft ever put the pro on sale?

Yes. I got mine during the last sale.

Share this post


Link to post

Can anybody assist me in updating the V5 crj airac with Navigraph FMS Downloader?  I can't get it to update.  THanks. 


9700k | Maximus XI Hero| 32gb DDR4 3000 | 1080Ti 11GB | 1tb EVO Plus 970 and 500GB M2+3TB HDD | 43" Samsung X60R 4k and 2  22" monitors | Corsair RM750x |  240MM AIO.| MFG Crosswind | T16000M Stick | Saitek Throttle Quad | Skalarki MCDU and FCU | Saitek Radio Panel

Share this post


Link to post

Hi:

Where do you find the update at?  When I check the updater, nothing comes up.  Also, no mention on the forums.  I also checked with the merchant I bought from and nothing listed.

Thanks.


Aaron Ortega

Share this post


Link to post

I bought it new and the installer had a v5 option I think. 


9700k | Maximus XI Hero| 32gb DDR4 3000 | 1080Ti 11GB | 1tb EVO Plus 970 and 500GB M2+3TB HDD | 43" Samsung X60R 4k and 2  22" monitors | Corsair RM750x |  240MM AIO.| MFG Crosswind | T16000M Stick | Saitek Throttle Quad | Skalarki MCDU and FCU | Saitek Radio Panel

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    22%
    $5,550.00 of $25,000.00 Donate Now
×
×
  • Create New...