September 4, 20205 yr The latest stable version of the A320 mod has now been released! 👍 https://github.com/flybywiresim/a32nx Added [ADIRS] Added ADIRS knob functionality [ADIRS] Added ADIRS ALIGN light functionality [ADIRS] IRS alignment affects PFD and MFD displays and indicators [ADIRS] IRS alignment affects TAT and SAT indicators on lower ECAM [ADIRS] IRS alignment time dependent on latitude [ADIRS] IRS alignment time remaining displays on upper ECAM [BRAKES] Brake gauge now properly reflects status of toe brakes and parking brakes [CHRONO] Added basic chronometer functionality [ECAM] Added full APU Bleed functionality to APU ECAM page [ECAM] Added F/CTL ECAM page with support for elevator, aileron, and pitch trim movements [ECAM] F/CTL ECAM reflects current ELAC and SEC status [ECAM] Lower ECAM automatically switches to DOOR page when a door is opened [ECAM] Lower ECAM automatically switches to APU page when APU master is switched on [ECAM] Added ECAM memos 'OVERSPEED', 'GND SPLRS ARMED', 'SEAT BELTS', and 'NO SMOKING' [MFD] Added range change indicator to navigation display [MFD] Added GPS status to navigation display [MISC] PFD, MFD, and ECAM displays now present a self-test upon powering up [MISC] PFD, MFD, ECAM, and MCDU displays no longer work only on battery - require external power or APU/engine generators [MISC] Added seatbelt sign switch functionality [MISC] Added no smoking sign switch functionality (full range of motion currently restricted) [MISC] Added moveable dummy knobs for cockpit, fwd, and aft cabin air conditioning controls [MISC] Added full (non-interactive) checklist [SOUND] Added chimes for seatbelt and no smoking switches Changed [APU] APU start and flap logic adjusted [APU] APU EGT is now adjusted for ambient temperature [APU] Smoothened APU EGT curve [APU] APU bleed now momentarily drops when bleed valve is opened [BRAKES] Fixed accumulator pressure changing when on battery [BRAKES] Autobrake is now off when starting cold-and-dark [ECAM] APU gen arrow now only shows when APU connected to bus [ECAM] APU 'FLAP OPEN' no longer displays instantly but reflects actual flap opening time [ECAM] Bleed ECAM page implemented [ECAM] Initializes on DOOR page instead of FUEL [ELEC] Battery display is now always on and displays battery voltage instead of main bus voltage [FCU] Altitude selection knob no longer requires explicit push/pull interaction to update new altitude target [FCU] Increased size of managed mode indicators [FCU] Adjusted alignment of altitude and vertical speed displays [FMA] Corrected '1FD2' to '1 FD 2' on FMA [FMA] Fixed 'SPEED' appearing whilst on the ground and A/THR requiring AP [FMA] Fixed various issues with thrust modes appearing incorrectly [FMA] Fixed thrust modes appearing when in GS or VS modes [FMA] Fixed 'SRS' appearing as armed, fixed 'SRS' disengagement conditions [FMA] 'SPEED' no longer appears with autopilot/auto-throttle disengaged [FMA] 'NAV', 'CLB', and 'DES' no longer appear with flight directors disabled [FMA] Fixed 'SPEED' and 'MACH' flickering at cruise [FMA] Improved 'OP DES' and 'OP CLB' trigger logic [FMA] Fixed 'CLB' and 'DES' appearing at incorrect times as well as on ground [FMA] Fixed 'NAV' not appearing with AP disengaged [FMA] Fixed 'ALT' in blue not appearing when changing altitudes [FMA] Fixed 'ROLLOUT' appearing after leaving the runway [FMA] Fixed 'GS' appearing with no FD's active [FMA] Fixed 'A/THR' appearing enabled on the ground [FMA] Fixed 'MACH' appearing on the ground [FMA] Fixed 'SPEED' and 'MACH' not appearing in some situations [FMA] Fixed 'THR LVR' and 'THR IDLE' not appearing in some situations [FMA] Decreased sensitivity for 'THR CLB' appearing on the FMA. [FMA] Fixed 'THR IDLE' not appearing when descending [FMA] Fixed 'THR LVR' appearing when in cruise phase [FMA] Fixed 'SPEED' not appearing with AP off but A/THR on [FMA] Fixed AP and FD FMA modes appearing green instead of white. [FMA] Fixed 'FINAL APP', 'LAND', 'FLARE', 'ROLLOUT' appearing with FD off [FMA] Fixed a situation where 'SPEED' wouldn't appear [FMA] Fixed 'HDG' appearing when on the ground [FMA] Fixed 'SINGLE' and 'DUAL' not appearing on ILS approaches [FMA] Fixed 'CAT' not appearing on FMA, improved logic to match ICAO criteria [FMA] Corrected logic for engaging ILS categories [FMA] Improved A/THR FMA modes logic. [FMA] Improved logic for 'CAT' modes on ILS approaches [FMA] Added support for 'ALT G/S' armed FMA mode [FMA] Improved CAT logic on FMA [LIGHTS] Brightness knobs for PFD, MFD, ECAM, FCU, and overhead panel are turned down when spawning cold-and-dark [LIGHTS] Reduced ambient cockpit lighting [LIGHTS] Change minimum brightness to 0 on all displays [MISC] Improve phase change logic [MISC] Change initial FLT states [MISC] Fixed engine selector on crank when starting in-flight or on approach [MFD] Adjusted look of wind arrow on navigation display [PERF] Overpowered engine thrust reduced [PERF] Fuel consumption improved [TEXTURES] Adjusted textures for panels, pedestal, and cockpit decals [TEXTURES] Adjusted colors on overhead panel Removed [LIGHTS] Taxi light no longer bleeds into cockpit [SOUND] Removed 70ft and 60ft radio altimeter callouts [SOUND] Removed overspeed voice warning (master warning chime will still play)
September 4, 20205 yr I lurked on their Discord channel last night and didn't understand a word I read. I am literally amazed to learn there are so many simmers who have knowledge of how the Airbus A320 systems work.
September 4, 20205 yr 13 minutes ago, UKflyer said: [LIGHTS] Taxi light no longer bleeds into cockpit Now, if someone could make that its own mod for the base a320 that would be nice. I'm happy with the base A320, but I appreciate the amount of work these people are doing.
September 4, 20205 yr Commercial Member Could buy FSLabs )) Probably not enough money Edited September 4, 20205 yr by BMW969 In jurisprudence, there is a principle - you look for the person who benefits.
September 4, 20205 yr Never really understood github and what exactly I need to download... What do I download and where does it go? Thank you very much to the developers for taking their valuable time to help make this aircraft more enjoyable.
September 4, 20205 yr Quote via the link use the green code button download as zip... then unzip en place the folder A32NX in the community folder that's it 😉 André
September 4, 20205 yr 27 minutes ago, UKflyer said: [LIGHTS] Taxi light no longer bleeds into cockpit Colonel approves! - Currently giving X-Plane 12.10 a spin on Shadow PC. 10 years with X-Plane now, since 10.20
September 4, 20205 yr I'd really like to see the UTC times in the MCDU displayed correctly. Hope there's a fix for this in the works. May all your landings be safe ones! Hugh Costello - NZWN
September 4, 20205 yr F$$$ YEAH! Sorry for my French 🙂 Life time flight sim enthusiast, current airplane owner 172P (past C182F). FAA CP/IR ASEL/AMEL, FI ASELMy System: AMD Ryzen 9 9950X3D , MSI X870 GAMING PLUS, 64G RAM, ASUS RTX5090, 4T SSDPut my hands on (pic/dual/given)7GCAA, 8KCAB, BE24, BE76, BE35-C33, BE35, C150, C152, C172B/N/P/R/SP, 182F, M20E,M20C, M20J, AT6(SNJ4), PA28-140,PA28-151, PA28-161,PA28-181,PA28RT-201,PA28R-180/201T, PA24-250, PA32-300R, PA44, AC114, YAK-18T, YAK-52, SR22
September 4, 20205 yr Author 10 minutes ago, Shug said: I'd really like to see the UTC times in the MCDU displayed correctly. Hope there's a fix for this in the works. I believe this is on the list, there's still 139 bugs and developments they are working on 🙂 https://github.com/flybywiresim/a32nx/issues Edited September 4, 20205 yr by UKflyer
Archived
This topic is now archived and is closed to further replies.