September 19, 20205 yr I have used MSI afterburner and RTSS for p3dv4.5 successfully for frame rate limiting (x/2) and OSD monitoring. But now with v5 it seems not to work anymore. Neither does it limit fps nor can I see it monitoring. I'd like to add that with MSFS the MSI AB / RTSS combination works just fine. Is there a special trick to get it to work with p3Dv5? - Harry 9800x3D (Strix x870e-E) - 64GB RAM (DDR5 6000, CL 30) - RTX 5090, 34'' 1440p OLED HDR - Windows 11 Pro (1TB M.2) - MSFS 2024 (MS Store, 4TB M.2).
September 19, 20205 yr You'll probably just need to wait until the utilities are updated to play nice with DX12. P3Dv4.x and MSFS are both DX11 programs. Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
September 19, 20205 yr Author 45 minutes ago, w6kd said: You'll probably just need to wait until the utilities are updated to play nice with DX12. P3Dv4.x and MSFS are both DX11 programs. Ouch, you're right. Completely forgot about DX12 being used by P3Dv5. Thanks. - Harry 9800x3D (Strix x870e-E) - 64GB RAM (DDR5 6000, CL 30) - RTX 5090, 34'' 1440p OLED HDR - Windows 11 Pro (1TB M.2) - MSFS 2024 (MS Store, 4TB M.2).
September 19, 20205 yr RTSS works fine for me on V5. Using it to limit FPS by scanline sync/x2 How many displays do you have connected?
September 20, 20205 yr Same here... worked in P3DV4.5, also in V5, and now in MSFS. No trick to it. Just set the profile for Prepar3D.exe. Note, it is "scanline sync x/2" with a non-zero value. Edited September 20, 20205 yr by Bert Pieke Bert
September 20, 20205 yr What happened with using the latest nvidia driver as of yesterday and the internal vsync in P3d v5 hf2. its a slide show for me. now I have vsync triple buffer and fps limit set to 30.5. Via inspector. fps unlimited vsync triple buffer off in sim. now it’s butter smooth. mike
September 20, 20205 yr Author 13 hours ago, Bert Pieke said: Same here... worked in P3DV4.5, also in V5, and now in MSFS. No trick to it. Just set the profile for Prepar3D.exe. Note, it is "scanline sync x/2" with a non-zero value. I had exactly the same settings all the time but now even MSFS does not work anymore with RTSS ... I'm going to uninstall MSI AB / RTSS and reinstall it again. - Harry 9800x3D (Strix x870e-E) - 64GB RAM (DDR5 6000, CL 30) - RTX 5090, 34'' 1440p OLED HDR - Windows 11 Pro (1TB M.2) - MSFS 2024 (MS Store, 4TB M.2).
September 20, 20205 yr 4 minutes ago, Nemo said: I had exactly the same settings all the time but now even MSFS does not work anymore with RTSS ... I'm going to uninstall MSI AB / RTSS and reinstall it again. All you need is RTSS! Bert
September 20, 20205 yr 38 minutes ago, Nemo said: I had exactly the same settings all the time but now even MSFS does not work anymore with RTSS ... I'm going to uninstall MSI AB / RTSS and reinstall it again. You might need to add a line in the cfg to define which display you want to sync, if running multiple
September 20, 20205 yr Be sure you set the .exe value, and not global. Works fine for me in V5. Edited September 20, 20205 yr by newtie
September 21, 20205 yr Works fine for me too. Intel i7 10700K | Asus Maximus XII Hero | Asus TUF RTX 3090 | 32GB HyperX Fury 3200 DDR4 | 1TB Samsung M.2 (W11) | 2TB Samsung M.2 (MSFS2020) | Arctic Liquid Freezer II 280mm AIO | 43" Samsung Q90B | 27" Asus Monitor
September 21, 20205 yr Author I've found the reason why it didn't work anymore. It was a DDU/Graphic Driver update that I've made some time ago. After uninstall and reinstall of RTSS/MSIAB everything works fine again for both P3Dv5 and MSFS. Thanks for comments. - Harry 9800x3D (Strix x870e-E) - 64GB RAM (DDR5 6000, CL 30) - RTX 5090, 34'' 1440p OLED HDR - Windows 11 Pro (1TB M.2) - MSFS 2024 (MS Store, 4TB M.2).
September 22, 20205 yr On 9/20/2020 at 9:38 PM, Bert Pieke said: All you need is RTSS! Sorry, Bert. That doesn't quite fit the music. (Beatles, "all you need is love". In case you are too young. Intel i7 6700K @4.3. 32gb Gskill 3200 RAM. Z170x Gigabyte m/b. 28" LG HD monitor. Win 10 Home. 500g Samsung 960 as Windows home. 1 Gb Mushkin SSD for P3D. GTX 1080 8gb.
September 22, 20205 yr 23 minutes ago, IanHarrison said: In case you are too young. Trust me, he's not too young! 😏 The World is divided into two groups. Those who say "Give me a link" and those that provide the link. WWG1WGA
September 22, 20205 yr Moderator On my system, v5hf2 works super smooth, thanks to Bert’s RTSS tip a while ago. It was such a game changer re. smoothness! Again, on my system it runs better than any other sim and pc I ever owned in the last 22 years. Cheers, Pete I9-13900K, RTX 4090, DR5-6000MHZ, CORSAIR ICUE H150I ELITE, ASUS PRIME Z790-P, THERMALTAKE TOUGHPOWER GF3 1350W, WIN 11
Archived
This topic is now archived and is closed to further replies.