October 30, 20205 yr Author X-Plane 11 works perfect with the same yoke and rudder config.... where as in FS2020 new patch made my TBM tilt.
October 30, 20205 yr Also, -70 is way too steep a curve, especially now with the new sensitivities they implemented in the new patch. I had to turn mine down and found -20 to -30 to be about right...for my setup. AMD 7900X | ASRock Steel Legend X670E | G.SKILL 32GB DDR5 6000 | MSI 6950XT | Noctua NH-D14 EVGA Super NOVA 850W | Cooler Master HAF932 | Hisense 43" 4K UHD | Win11
October 30, 20205 yr Author 1 hour ago, Dean19 said: Also, -70 is way too steep a curve, especially now with the new sensitivities they implemented in the new patch. I had to turn mine down and found -20 to -30 to be about right...for my setup. I still wonder why it works ok on manual flight and when the LVL mode is engaged. When I engage the NAV or HDG mode it starts to tilt to either side. Wierd.
October 30, 20205 yr Commercial Member 15 minutes ago, Concorde79 said: I still wonder why it works ok on manual flight and when the LVL mode is engaged. When I engage the NAV or HDG mode it starts to tilt to either side. Wierd. Because AP has to compensate for your lack of deadzone whereas manually you are doing it, and with deadzone zero its such a tiny adjustment that you probably dont even realise your doing it. Now, could you please stop asking the same question over and over and actually apply the fixes and tips you were provided with? 😄
October 30, 20205 yr 12 minutes ago, leprechaunlive said: Because AP has to compensate for your lack of deadzone whereas manually you are doing it, and with deadzone zero its such a tiny adjustment that you probably dont even realise your doing it. Now, could you please stop asking the same question over and over and actually apply the fixes and tips you were provided with? 😄 Uh, he already stated that he DID apply the fixes to the deadzones as suggested, and the problem persists. Why do you? Andreas Stangenes http://www.youtube.com/user/krsans78 Add me on gamertag: Bullhorns78
October 30, 20205 yr Commercial Member 47 minutes ago, Andreas Stangenes said: Uh, he already stated that he DID apply the fixes to the deadzones as suggested, and the problem persists. Why do you? Hmm, my bad @concorde79 read the thread a bit too quickly 🙂 Disregard.
October 30, 20205 yr 5 hours ago, Concorde79 said: Even my yoke and rudder sensitivities are the same as before this patch when the TBM was flying right seems that now the rudder is moving either right or left even with rudder trim at 0. This is when the autopilot is on and HDG or NAV mode engaged. when I hit LVL it straightens. So I assume the autopilot is broken Been fine here too just did an ILS approach to KJAC and all was fine. Noel System: 9900X3D Noctua NH-D15 G2, MSI Pro 650-P WiFi, G.SKILL 64GB (2 x 32GB) 288-Pin PC RAM DDR5 6000, WD NVMe 2Tb x 1, Sabrent NVMe 2Tb x 1, RTX 4090 FE, Corsair RM1000W PSU, Win11 Home, LG Ultra Curved Gsync Ultimate 3440x1440, Phanteks Enthoo Pro Case, TCA Boeing Edition Yoke & TQ, Cessna Trim Wheel, RTSS Framerate Limiter w/ Front Edge Sync. Aircraft used in MSFS 2024: Fenix A320, Aerosoft CRJ, FBW, WT 787X, I-Fly 737 MAX 8, Citation Longitude.
October 30, 20205 yr I have had this bug before once in the G36 in the previous patch. It has nothing to do with control sensitivity or dead zone, there was something wrong with the autopilot. I think it started after I had paused or escaped to the main menu during flight.
October 30, 20205 yr I'm calling the ap too.....My TBM flew awful after this patch. I changed the sensitivities on the joystick with little result. The 172 and twins fly fine. This is a peculiar bug to the autopilot on the TBM. Shame too, as its really a fun plane to fly.
October 31, 20205 yr Author 13 hours ago, quantumpion said: I have had this bug before once in the G36 in the previous patch. It has nothing to do with control sensitivity or dead zone, there was something wrong with the autopilot. I think it started after I had paused or escaped to the main menu during flight. My conclusion too since the plane flies ok with the LVL mode engaged and other planes fly ok and X-Plane 11. The tilt starts when I engage the HDG or NAV mode. Then some funboys come here screaming IT IS YOUR YOKE/RUDDER SETTING ! IT IS NOT A BUG IN THE SIM !!11!11! Frustrating because this is the third patch where Asobo breaks the TBM autopilot. She used to be a very nice plane to fly until patch#3. Before patch#3 I could climb up to FL310 and no problem whatsoever. Now TBM autopilot is a mess. Edited October 31, 20205 yr by Concorde79
October 31, 20205 yr 57 minutes ago, Concorde79 said: Then some funboys come here screaming IT IS YOUR YOKE/RUDDER SETTING ! IT IS NOT A BUG IN THE SIM !!11!11! Is that what you call people trying to help you? Well I promise to never try to help you again. David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
October 31, 20205 yr I have the same issue and all the answer listed above did not work, everything was working fine in the precedent patch, hope it will be fixed soon...
October 31, 20205 yr On 10/30/2020 at 1:38 PM, Concorde79 said: I assume the autopilot is broken The autopilot works just fine. Look more closely into what is messed up on your end. Edited October 31, 20205 yr by Ricardo41
Archived
This topic is now archived and is closed to further replies.