November 19, 20205 yr i´ll wait until HiFi confirms compatibility or provide an update, but i´am corious about what´s left for complaining....😁....oh wait, LM didn´t mentioned about that they fixed the martian look of EA at dusk and dawn... Edited November 19, 20205 yr by BerndB Bernd P3D V6 - PC spec: Intel i9-9900 overclocked 5 GHz HT off, 32 GB RAM, GPU Nvidia RTX3090 24GB, 2xM2 SSD, Skalarki HomeCockpit and Jeehell FMGS on a dedicated Server, PF3 for ATC, MCE, GSX, EFB, AS+ASCA+ENV and OrbX
November 19, 20205 yr Moderator Do any of these addons work already with 5.1hf1, particularly pmdg, Leonardo, fslabs and Majestic? I want to make sure I don’t have 2 sims without complex airliners, even if it’s just for a short time 😎 Cheers, Pete I9-13900K, RTX 4090, DR5-6000MHZ, CORSAIR ICUE H150I ELITE, ASUS PRIME Z790-P, THERMALTAKE TOUGHPOWER GF3 1350W, WIN 11
November 19, 20205 yr i doubt FSL will with out an update ROG Crossair Hero X670e , 9900X, TUF 4090 , X4 NVME's. OS 2TB 980 Pro , MSFS 2TB WD Black , Kington Fury 64GB ram ( 6000) Corsair RM1000 PSU, Artic Freezer iii 360 AIO . Phanteks P600s Case ,TCL QM8B 50" 120 Hz TV,second 24 inch screen for charts you tube etc, and 11" touch screen for the EFB. Warthog Stick and TCA Captains throttle ( full pack) Velocity 1 Rudder Pedals , extreme3D for the Tiller,Streamdeck XL x2 / Streamdeck +/Streamdeck mini because i like pressing buttons
November 19, 20205 yr Just now, Peter Z KCLE_EDDN said: Do any of these addons work already with 5.1hf1, particularly pmdg, Leonardo, fslabs and Majestic? I want to make sure I don’t have 2 sims without complex airliners, even if it’s just for a short time 😎 Cheers, Pete leonardo is working on one and I understand it's in beta testing. So the MD80 will not work. Fslabs will need an update also since it's version locked to 5.1 non hotfix. 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
November 19, 20205 yr Im waiting for Active Sky update :). Webmaster of yoyosims.pl.Win 10 64, i9 9900k, RTX 3090 24Gb, RAM32Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: HP Reverb G2
November 19, 20205 yr 3 minutes ago, BerndB said: i´ll wait until HiFi confirms compatibility or provide an update, but i´am corious about what´s left for complaining....😁....oh wait, LM didn´t mentioned about that they fixed the martian look of EA at dusk and dawn... Quick test....still on MARS. very Orange/Red. It is a little confusing they do so less about the visible eye candy stuff. It is if the DEV has a fable for ugly 😉 Regards, Marcus P.
November 19, 20205 yr 1 hour ago, Dreamflight767 said: Exciting. Hopefully good news. Now go get it folks and PLEASE report back. You weren't a general in WW1 were you? Forward men, into the battle. Let me know how you get on. I'll be in the Officer's Mess. The World is divided into two groups. Those who say "Give me a link" and those that provide the link. WWG1WGA
November 19, 20205 yr Moderator Lol Ron 😎 I9-13900K, RTX 4090, DR5-6000MHZ, CORSAIR ICUE H150I ELITE, ASUS PRIME Z790-P, THERMALTAKE TOUGHPOWER GF3 1350W, WIN 11
November 19, 20205 yr This is nice: Quote Fixed various building, vegetation, and vehicle models that would blend incorrectly with clouds If I install "client" and "scenery" will I destroy my libraries and owned scenery cfg? Till now I installed client only or whole the sim (when the new update was out). Edited November 19, 20205 yr by YoYo Webmaster of yoyosims.pl.Win 10 64, i9 9900k, RTX 3090 24Gb, RAM32Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: HP Reverb G2
November 19, 20205 yr 1 minute ago, YoYo said: This is nice: If I install "client" and "scenery" will I destroy my libraries and owned scenery cfg? Till now I installed client only or whole the sim (when the new update was out). you can install without problems both. I would even suggest updating content as well
November 19, 20205 yr its been i nightmare for me i cant wait to uninstall it , however not before FSL and AS !! ROG Crossair Hero X670e , 9900X, TUF 4090 , X4 NVME's. OS 2TB 980 Pro , MSFS 2TB WD Black , Kington Fury 64GB ram ( 6000) Corsair RM1000 PSU, Artic Freezer iii 360 AIO . Phanteks P600s Case ,TCL QM8B 50" 120 Hz TV,second 24 inch screen for charts you tube etc, and 11" touch screen for the EFB. Warthog Stick and TCA Captains throttle ( full pack) Velocity 1 Rudder Pedals , extreme3D for the Tiller,Streamdeck XL x2 / Streamdeck +/Streamdeck mini because i like pressing buttons
November 19, 20205 yr regarding updating, if i remember correctly, i only had 3 components in ver 4.5 (client, content and scenery). with ver 5.1 i have 4 entries, now with a generic LM P3dv5 Professional entry. i have always updated by uninstalling all 3 components. with ver 5.1 should i also uninstall the 4th file (LM P3dv5 Professional)? David Myers
November 19, 20205 yr 6 minutes ago, av8r13 said: regarding updating, if i remember correctly, i only had 3 components in ver 4.5 (client, content and scenery). with ver 5.1 i have 4 entries, now with a generic LM P3dv5 Professional entry. i have always updated by uninstalling all 3 components. with ver 5.1 should i also uninstall the 4th file (LM P3dv5 Professional)? no just the 3. the 4th entry is do remove everything when you want to uninstall the whole product
November 19, 20205 yr Bear in mind, especially if you have OrbX add-ons in use, this recomendation below, which comes from OrbX. There is also a thread at OrbX which you always schould take into account if you are updating P3D. Which says: 1. de-install P3D in the following order: - content, then scenery, then client and at least the Main app but don´t de-activate P3D 2. install the full P3D installer 3. Start P3D once and let it build the scenery database and indezies 4. De-install via OrbX scenery manager the global packages like Global base, vector, lybraries etc. and make a new re-install of those packages (This step is very important, to prevent from CTD´s caused by missing or corrupted textures) 5. Perform a file verification for all regions like Europe, England etc. (a syncronization is not enough) Start P3D an let it rebuild the scenery database Then everything schould be fine. For the Airports is no specific handling needed as they should work as they are. Doing this, allways worked fine for me and decreases the possibility of CTD´s Edited November 19, 20205 yr by BerndB Bernd P3D V6 - PC spec: Intel i9-9900 overclocked 5 GHz HT off, 32 GB RAM, GPU Nvidia RTX3090 24GB, 2xM2 SSD, Skalarki HomeCockpit and Jeehell FMGS on a dedicated Server, PF3 for ATC, MCE, GSX, EFB, AS+ASCA+ENV and OrbX
November 19, 20205 yr BerndB, just to clarify, if we have ORBX we should uninstall all 4 components? disregard, i just found the thread at the ORBX forum https://orbxsystems.com/forum/topic/192424-installing-a-p3d-v5-hotfix-correctly/ Edited November 19, 20205 yr by av8r13 David Myers
Archived
This topic is now archived and is closed to further replies.