March 19, 20215 yr Started Sim with flight plan loaded. Then... Sitting on the runway at KFHR in the KingAir 350 - frame rate was running between 5 and 10 fps - system was almost non-responsive. I had not yet taken off because I could not get any of the controls set. Suddenly I received a message saying (in a white message box with small black letters) "Break Point A reached" with an OK click spot. I clicked on it once and received the same message, clicked on it a 2nd time and the sim crashed to the desktop. Is it possible some debugging code was left in the distributed sim? In the prior startup of the sim I had flown the same flight plan and saw a very steady 29 - 32 fps on the KFHR runway and take off. AMD Ryzen 7 9800X3D / MSI X870 Tomahawk Mobo / 64 GB DDR5 memory / RTX 4070 Super with 12 GB VRAM / AORUS FO48U 4k display NVMe for Drive C, an NVMe device dedicated to Flight Sim 2024 and a separate NVMe device for Flight Sim 2020 and an NVMe dedicated to 500GB of addons managed by AddonsLinker / 1 GB Comcast Xfinity Internet connection / HP Reverb G2 / Tobii 5 Head & Eye Tracking
March 19, 20215 yr are you using developer mode? MSFS Alpha tester on W10 Pro x64. Hardware: AMD 5900X 12 core CPU. Cooler Master ML360R AIO, Asus X570-E mobo, Asus Strix 3090 24GB gfx card, G.Skill TridentZ 64GB (4x16) DDR4-3600 RAM, Samsung 970 250GB SSD (OS), Samsung 980 Pro 1TB M.2 pcie-4 NVMe SSD (MSFS install). EVGA 850w Gold cert PSU, CUK Continuum full ATX tower. 43" Sceptre 4K display. VR: HP Reverb G2.
March 19, 20215 yr Breakpoints do refer to debugging code - I'd probably file a Zendesk issue, they should be able to track where this code is in the codebase. Location: 🇦🇺 Brisbane, Australia, 19.0dme YBBN 120.50 | Simulator: FS2024PC Hardware: AMD Ryzen 9 9800X3D ▸ MSI MAG X870 Tomahawk ▸ 2x16Gb G.SKILL Trident Z5 Neo RGB DDR5 ▸ GeForce RTX 5080 Palit GamingPro OC 16GB GPU ▸ 4TB Samsung 990 PRO PCIe 4.0 NVMe M.2 SSD ▸ Corsair 1000W RM1000x SHIFT 80+ Gold ▸ MSI MAG401QR: 40" flat IPS ultrawide 3440x1440 155hz
March 20, 20215 yr 29 minutes ago, Bobsk8 said: Wouldn't it be great if they would beta test at Asobo??? It would appear that, that, is not their job ... it is ours ... get with the programme LOL Disappointing at best Tony Tony Chilcott. My System. Motherboard. ASRock Taichi X570 CPU Ryzen 9 3900x (not yet overclocked). RAM 32gb Corsair Vengeance (2x16) 3200mhz. 1 x Gigabyte Aorus GTX1080ti Extreme and a 1200watt PSU. 1 x 1tb SSD 3 x 240BG SSD and 4 x 2TB HDD OS Win 10 Pro 64bit. Simulators ... FS2004/P3Dv4.5/Xplane.DCS/Aeroflyfs2...MSFS to come for sure.
March 20, 20215 yr How can you beta test when after CTD when loading a flight you follow the advise Repair no good Reset no good un-install and re-install now cannot get MSFS to load. https://www.flickr.com/photos/154944674@N05/51053944957/in/dateposted-public/ https://www.flickr.com/photos/154944674@N05/51053863841/in/dateposted-public/ My system runs P3Dv5 DX12 no problem MSFS is now broken. And no addons. Raymond Fry.
March 20, 20215 yr 4 hours ago, TacomaSailor said: Started Sim with flight plan loaded. Then... Sitting on the runway at KFHR in the KingAir 350 - frame rate was running between 5 and 10 fps - system was almost non-responsive. I had not yet taken off because I could not get any of the controls set. Suddenly I received a message saying (in a white message box with small black letters) "Break Point A reached" with an OK click spot. I clicked on it once and received the same message, clicked on it a 2nd time and the sim crashed to the desktop. Is it possible some debugging code was left in the distributed sim? In the prior startup of the sim I had flown the same flight plan and saw a very steady 29 - 32 fps on the KFHR runway and take off. I think some code was left in the last update that shouldn't have been there. I believe it caused a memory leak. Which is why so many people are experiencing lagging and stuttering. AMD Ryzen R9 9950X3D | Asus Astral RTX 5080 OC | 32 GB DDR5 6000 CL30 | 3440x1440 G-Sync | Logitech Pro Throttles Rudder Yoke Panels | Thrustmaster T.16000M FCS | TrackIR 5 | Oculus Rift S
March 20, 20215 yr Things may be back on track I will not know till tomorrow had to wipe all of MSFS of the PC and log out of MS store, now Re-Installing but paused will do overnight have flying to do, Will be a MSFS virgin again 😆. Raymond Fry.
March 20, 20215 yr Update surprise started the downloading again went shopping came back down to the last GB install in a few hours, Started flight OK all my settings were still there after wiping the PC short flight over Rome real weather. https://www.flickr.com/photos/154944674@N05/51055083803/in/dateposted-public/ Need to Edit my tail number again. and what`s with the tall tower block. Raymond Fry.
March 20, 20215 yr 18 hours ago, TacomaSailor said: Started Sim with flight plan loaded. Then... Sitting on the runway at KFHR in the KingAir 350 - frame rate was running between 5 and 10 fps - system was almost non-responsive. I had not yet taken off because I could not get any of the controls set. Suddenly I received a message saying (in a white message box with small black letters) "Break Point A reached" with an OK click spot. I clicked on it once and received the same message, clicked on it a 2nd time and the sim crashed to the desktop. Is it possible some debugging code was left in the distributed sim? In the prior startup of the sim I had flown the same flight plan and saw a very steady 29 - 32 fps on the KFHR runway and take off. That often points out to a corrupted file.The airport is not flawed, I've just flown a pattern there with the Spit' to check. Great framerate, very smooth. It could be your flight plan which has gotten bad. Have you tried without it ? And have you an addon in the vicinity ? Dominique Simming since 1981 - [email protected] GHz with 16 GB of RAM and a 1080 with 8 GB VRAM running a 27" @ 2560*1440 - Windows 10 - Warthog HOTAS - MFG pedals - MSFS Standard version with Steam
March 20, 20215 yr 28 minutes ago, Dominique_K said: That often points out to a corrupted file.The airport is not flawed, I've just flown a pattern there with the Spit' to check. Great framerate, very smooth. It could be your flight plan which has gotten bad. Have you tried without it ? And have you an addon in the vicinity ? Also did a quick flight from there just now .. FR good .. buttttt .. about 2 miles out there is a spot which drags the FPS down for about 15 seconds. Something is "lurking" in the area 😆 Intel i7 - 9700K @ 3.60 GHz | Asus RTX 3080 | 32 GB RAM | Saitek ProFlight Yoke System and Rudder Pedals | X-Touch Mini | Honeycomb Bravo TQ
March 20, 20215 yr 39 minutes ago, SAPilot said: Also did a quick flight from there just now .. FR good .. buttttt .. about 2 miles out there is a spot which drags the FPS down for about 15 seconds. Something is "lurking" in the area 😆 Yep, a stuttering gremlin lurks over Lopez Is. Dominique Simming since 1981 - [email protected] GHz with 16 GB of RAM and a 1080 with 8 GB VRAM running a 27" @ 2560*1440 - Windows 10 - Warthog HOTAS - MFG pedals - MSFS Standard version with Steam
March 20, 20215 yr My Sim uses allmost in every Flight ( in Task Manager ) CDU 5-15% and GPU 10-25% in allmost all situations ???????????????????. That is causing the stutters and at some points ( saw it often in USA ) i get one frame per second and this never find back so i have to shut down the Sim over Task Manager closing the Task. Man, where is that Hotfix..😌 cheers 🤔 08.2024 new PC is online : ASUS ROG STRIX X670E-F GAMING WIFI Mainboard, AMD Ryzen™ 9 7950X3D Prozessor, G.Skill DIMM 64 GB DDR5-6000 (2x 32 GB) Dual-Kit, MSI GeForce RTX 4090 VENTUS 3X E 24G OC Grafikkarte, 2x WD Black SN850X NVMe SSD 4 TB - Drive C+D, WD Gold Enterprise Class 12 TB for storage HDD, Thermaltake Toughpower GF3 1000W PC - Power supply, Thermalright Phantom Spirit 120 EVO CPU Aircooler with 7 Heatpipes, Design Meshify 2 White TG Clear Tint Tower-Case, 3x 4K monitors 2x32 Samsung 1x27 LG 3840x2160, Windows11 Prof. 23H2 - now Windows11 Prof. 25H2 Flightsimulator Hardware: Honeycomb Throttle Bravo, Logitech Extreme 3D Pro, Logitech Flight Joke System, XBox Controller, some Thrustmaster stuff, Winwing CDU Panels.
March 20, 20215 yr Author 21 hours ago, Brandon01110 said: are you using developer mode? YES AMD Ryzen 7 9800X3D / MSI X870 Tomahawk Mobo / 64 GB DDR5 memory / RTX 4070 Super with 12 GB VRAM / AORUS FO48U 4k display NVMe for Drive C, an NVMe device dedicated to Flight Sim 2024 and a separate NVMe device for Flight Sim 2020 and an NVMe dedicated to 500GB of addons managed by AddonsLinker / 1 GB Comcast Xfinity Internet connection / HP Reverb G2 / Tobii 5 Head & Eye Tracking
March 20, 20215 yr Author 4 hours ago, Dominique_K said: That often points out to a corrupted file.The airport is not flawed, I've just flown a pattern there with the Spit' to check. Great framerate, very smooth. It could be your flight plan which has gotten bad. Have you tried without it ? And have you an addon in the vicinity ? Same thing happens when I takeoff from KFHR with NO flight plan. It happens in the C152 (all old analog gauges and no autopilot), C172, GA36, DA62, TBM 930 with NO mods of any kind (Community Folder is empty). It happens at EXCATLY the same spot in every aircraft at speeds from 70 knots to 190 knots and from 0 feet per second to 2500 feed per second climb. The identical problem occurs exactly the same when I load up a bunch of local mods, ORBX mods, TBM mods, G36 Turbo Mod, G1000 and G3000 WT mods. The problem is location specific. Prior to that location my CPU is at 65 - 75% and GPU at 100% with 32 frames/second, instantly the CPU goes to 99% and GPU drops to 40% at 14 - 16 frames/second. Prior to the problem the sim is 100% of the time GPU limited, it then becomes Main Thread limited (thread response goes from 25ms to 65 - 75ms), Waiting for Manipulators, and very occasionally CPU limited. The problem is 100% replicable. AMD Ryzen 7 9800X3D / MSI X870 Tomahawk Mobo / 64 GB DDR5 memory / RTX 4070 Super with 12 GB VRAM / AORUS FO48U 4k display NVMe for Drive C, an NVMe device dedicated to Flight Sim 2024 and a separate NVMe device for Flight Sim 2020 and an NVMe dedicated to 500GB of addons managed by AddonsLinker / 1 GB Comcast Xfinity Internet connection / HP Reverb G2 / Tobii 5 Head & Eye Tracking
Archived
This topic is now archived and is closed to further replies.