Skip to content
View in the app

A better way to browse. Learn more.

The AVSIM Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

FlyByWire Simulations | A32NX development update

Featured Replies

The new EFB looks and works amazing. I DID have some problems with climb on the one test flight I did - It just stopped at about FL230 and wouldn't climb any further. Also, after using EXPED, the speed maintained at green dot and no matter what I did I wasn't able to get it above 240 IAS or so... (tried managed, selected values changing etc)... May have been a fluke, but wondering if anyone dealt with anything like that. Engine remained at about 89%...

  • Replies 65
  • Views 10.8k
  • Created
  • Last Reply
6 hours ago, gb09f said:

I tried to fly a Boeing but it was like going back 40 years. 

What makes you say that?

Ohh-oh!  Fighting talk!  Get the deck chairs and pop corn out!  :biggrin:

Rob (but call me Bob or Rob, I don't mind).

I like to trick airline passengers into thinking I have my own swimming pool in my back yard by painting a large blue rectangle on my patio.

Intel 14900K in a Z790 motherboard with water cooling, RTX 4080, 32 GB 6000 CL30 DDR5 RAM, W11 and MSFS on Samsung 980 Pro NVME SSD's.  Core Isolation Off, Game Mode Off.

I'm not getting the QRC code to scan for NAVIGRAPH activation. The message is stuck on "loading". Anyone else see this and were you able to get it to load?

Bill Moore

just installed dev mode to try it out but i noticed one of my throttles while accelerating the right is uneven by say 10% higher ?

does not happen with other aircrafts.

anyone else notice this?

thanks

mike

Just now, mikeymike said:

just installed dev mode to try it out but i noticed one of my throttles while accelerating the right is uneven by say 10% higher ?

does not happen with other aircrafts.

anyone else notice this?

thanks

mike

I think you're supposed to use the calibration tool in the flypad.  There's a how-to vid of it somewhere in their Discord.

Jeff D. Nielsen (KMCI)

https://www.twitch.tv/pilotskcx

https://discord.io/MaxDutyDay

VENGEANCE a8200 Gaming PC: AMD Ryzen 9 9950X3D, GeForce RTX 5080, 64GB DDR5, 4TB (2TB/2TB) M.2 SSD, Win11 Pro

8 minutes ago, Jeff Nielsen said:

I think you're supposed to use the calibration tool in the flypad.  There's a how-to vid of it somewhere in their Discord.

hmmm im trying but i think i may be doing something wrong

climb 0.00 overlaps with flex 0.45 in red

thanks 

mike

 

nvm fixed it lol had to save and apply

 

Edited by mikeymike

Custom Flight Management System is a hugeeeeeeeeee one for me! Hopefully this will fix those those annoying USR waypoints that we're getting in our flight plans. Totally ruins the immersion. Thanks to you guys at FBW for putting in the effort to make this the best A320 NEO ever! The level of detail is amazing! I will be able to fully enjoy this plane once we have a proper working VNAV system to go along with the custom flight plan manager!

ASUS ROG Maximus Hero XII ▪︎ Intel i9-10900K ▪︎ NVIDIA RTX 3090 FE ▪︎ 64GB Corsair Vengeance RGB Pro ▪︎ Windows 10 Pro (21H1) ▪︎ Samsung 970 EVO Pro 1TB NVME SSD (OS Drive) ▪︎ Samsung 860 EVO 2TB SATA SSD ▪︎ Seagate 4TB SATA HDD ▪︎ Corsair RMx 850W PSU

guys one question, how do i set my saitek throtttle so when i pull forward to 50 on the quadrant it shows 50% n1 atm i pull forward on the quadrant at 25 which goes to 50% n1 

thanks

mike

7 hours ago, BostonJeremy77 said:

It just stopped at about FL230 and wouldn't climb any further. Also, after using EXPED, the speed maintained at green dot and no matter what I did I wasn't able to get it above 240 IAS or so..

Was your landing gear up and locked correctly?

Bernard

CPU = 12900K / GPU = Nvidia 3090 VRAM 24 GB / RAM = 64 GB / SSD = 2 TB 980 PRO PCle 4.0 NVMe™ M.2, 

41 minutes ago, Bernard Ducret said:

Was your landing gear up and locked correctly?

It certainly was up... I wasn't aware of anything special that I have to do to lock it? Is this something new? 

Edited by BostonJeremy77

  • Author
1 hour ago, BostonJeremy77 said:

It certainly was up... I wasn't aware of anything special that I have to do to lock it? Is this something new? 

No, nothing new. Just up or down, as always.


 

9 hours ago, BostonJeremy77 said:

The new EFB looks and works amazing. I DID have some problems with climb on the one test flight I did - It just stopped at about FL230 and wouldn't climb any further. Also, after using EXPED, the speed maintained at green dot and no matter what I did I wasn't able to get it above 240 IAS or so... (tried managed, selected values changing etc)... May have been a fluke, but wondering if anyone dealt with anything like that. Engine remained at about 89%...

 

Is the FMA showing you thr clb or it flashes lvr clb?

Does your throttle correctly go to climb thrust?

 

In one of the dev updates weeks ago something changed and even if you have calibrated your throttles before you have to do it again.

 

I had the same issue as yours; realized that  my aircraft wouldn't properly go to climb mode

7 hours ago, bill62 said:

I'm not getting the QRC code to scan for NAVIGRAPH activation. The message is stuck on "loading". Anyone else see this and were you able to get it to load?

FBW posted they see server issues with the Navigraph implementation, they are working on it. Worked for me yesterday before everybody jumped in

Phil Leaven

i5 10600KF, 32 GB 3200 RAM, ASUS 4070 12GB EVO, Asus ROG Z490-H, 2 WD Black NVME for each Win11 (500GB) and MSFS (1TB), Rolling Cache 16GB, Photogrammetry always OFF, Live Weather and Live Traffic always ON, Res 2560x1440 on 27"

Archived

This topic is now archived and is closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.