May 26, 20224 yr I have a bone to pick with Just Flight. Why doesn't the Geordie guy who did the excellent videos also do the call-outs for the plane? Please? 2500 pet. 300 pet. 50 pet....😂 Edited May 26, 20224 yr by jarmstro
May 26, 20224 yr Commercial Member v1.3 is now available via your Just Flight account if you purchased it directly from us. We will be sending the update to the Marketplace team shortly but unfortunately we can't offer a timeframe for release of that version as it'll depend on the processing time at their end. Martyn - Just Flight Martyn - Just Flight
May 26, 20224 yr Commercial Member 12 minutes ago, jarmstro said: I have a bone to pick with Just Flight. Why doesn't the Geordie guy who did the excellent videos also do the call-outs for the plane? Please? 2500 pet. 300 pet. 50 pet....😂 I'm afraid I took the role of co-pilot on the 146, with my wife as cabin crew, prior to my colleague Mark joining the development team. We can certainly look into a Northern co-pilot option though! Martyn - Just Flight Martyn - Just Flight
May 26, 20224 yr On 5/17/2022 at 1:27 PM, Luis Hernandez said: Found the answer last night: JF uses the default (as in set through the MSFS menu) trim assignments. Since I don't want to mess with my other planes, in my JF146 FSUIPC profile I mapped the joystick buttons to the default trim keys. Now it files better. I have the exact same problem. Using the offset method in fsuipc to control the trim speed doesn’t work. When i assign elevator trim up/dn in fsuipc, the trim is very slow. So what did you assign it to now in fsuipc? Kind Regards, André
May 26, 20224 yr 29 minutes ago, jarmstro said: I have a bone to pick with Just Flight. Why doesn't the Geordie guy who did the excellent videos also do the call-outs for the plane? Please? 2500 pet. 300 pet. 50 pet....😂 As an adopted Geordie for the last 25 years, I'd love that! "Postive rate, whey aye! gear up, man!". 😁 Bill 😎FS2024 • Currently in 'GA mode' : A2A Comanche 2024 & Aerostar • Black Square C208, Bonanzas, Barons, TBM850, Dukes • COWS DA40 & DA42 • FSW Legacy, C24R Sierra & C414 • Echo Falco F8L • FFX HJET, Visionjet and P180 2024 • Got Friends A32 Vixxen • FSReborn Sirius TL3000, Sting S4 and Piper M500 • Flyboy Rans S6S • Skyward DA50RG • SWS Zenith CH701, RV-8, RV-10, RV-14, PC12 • Milviz C310R • Air Foil Labs Bristell B23 TrackIR • BeyondATC • PMS GTN Payware • RealTurb • Axis & Ohs • FS Realistic Pro9800X3D • RTX 3080 • 64GB DDR5-6000NPPL licence holder in the UK
May 26, 20224 yr 1 hour ago, Andre92 said: I have the exact same problem. Using the offset method in fsuipc to control the trim speed doesn’t work. When i assign elevator trim up/dn in fsuipc, the trim is very slow. So what did you assign it to now in fsuipc? André, in a new profile for the 146 (so that I won't ruin other planes' mappings), I mapped Num7 and Num1 to the buttons I intend to use for trim. Basically, it's the same trick that Froogle did here for FSX: Best regards,Luis Hernández Main rig: self built, AMD Ryzen 7 5700X3D (with SMT off and CO -50 mV), 2x16 GB DDR4-3200 RAM, Nvidia RTX 5060Ti 16GB, 256 GB M.2 SSD (OS+apps) + 2x1 TB SATA III SSD (sims) + 1 TB 7200 rpm HDD (storage), ID-Cooling SE-224-XTS air cooler, Viewsonic VX2458-MHD 1920x1080@120-144 Hz (G-sync compatible), Windows 11. Running P3D v5.4 (with v4.5 scenery objects as an additional library, just in case), FSX-SE, MSFS2020, MSFS2024 and even FS9! Lossless Scaling for all my sims. What a godsend...Mobile rig: ASUS Zenbook UM425QA (AMD Ryzen 7 5800H APU @3.2 GHz and boost disabled, 1 TB M.2 SSD, 16 GB RAM, Windows 11 Pro). Running FS9 there .VKB Gladiator NXT Premium Left + GNX THQ as primary controllers. Xbox Series X|S wireless controller as standby/mobile.
May 26, 20224 yr Quote I'm afraid I took the role of co-pilot on the 146 So you're the guy who calmly repeats 'brake pressure seen' on every bounce as we pogo down the runway to certain destruction... ...
May 26, 20224 yr All good here. Downloaded the update and just had a flight - great. Even landed it in one piece! 🙂 Ref the trim, for those who are new to the model, assigning a HOTAS button to the 'Sync' function (the excellent manual says which MSFS command to use) works wonders. It basically toggles to engage and disengage the Autopilot clutch, so you can disengage, then use the trim buttons to start a rate of climb or descent and then re-engage when you are rising or falling at the target rate. Once you get your head round what is actually happening, it is an exceptionally flexible way of doing things. Great job with the update, Just Flight 🙂 Ryzen 7 9800x3D @5.2GHz; ASUS X670-P Motherboard; nVidia 4080 (factory o/c); 32G 5600MHz DDR5 SDRAM; Pimax Crystal Light VR Headset; Quest 3 VR Headset
May 26, 20224 yr I can't figure out how to turn on the Left Lap Light and the Centre Console Light and the Left Still Light. Has somebody a hint for me in that regard ? Edited May 26, 20224 yr by darshonaut my African sceneries for MSFS : https://darshonaut.blogspot.com/p/msfs-2020.html
May 26, 20224 yr Does the Bae 146 have a remote FMC for your IPad? It is the same as the working title CJ4 is it not?
May 26, 20224 yr 5 hours ago, Luis Hernandez said: André, in a new profile for the 146 (so that I won't ruin other planes' mappings), I mapped Num7 and Num1 to the buttons I intend to use for trim. Basically, it's the same trick that Froogle did here for FSX: Thank you!
May 26, 20224 yr 2 hours ago, rob0203 said: Does the Bae 146 have a remote FMC for your IPad? It is the same as the working title CJ4 is it not? Yes that would be great! There already is a remote Cdu application for the CJ4 on Github. It would be great if this could be adapted to work with the Bae146. https://github.com/dementedmonkey/cj4-mcdu
May 26, 20224 yr 4 hours ago, darshonaut said: I can't figure out how to turn on the Left Lap Light and the Centre Console Light and the Left Still Light. Has somebody a hint for me in that regard ? I think those are left of the pilot yoke, two small push buttons for sill and lap, and dial for pilot and center panel light. Buttons are right above note that says Push On/Off.
May 27, 20224 yr 5 hours ago, ZoblebV8 said: I think those are left of the pilot yoke, two small push buttons for sill and lap, and dial for pilot and center panel light. Buttons are right above note that says Push On/Off. thank you, I will try this ! I always let the yoke diasappear 🤪 No wonder I don't find the buttons ... my African sceneries for MSFS : https://darshonaut.blogspot.com/p/msfs-2020.html
May 27, 20224 yr Installed the 0.1.3 update and did a test flight from Brussels to London City, everything is A-OK for me. MacBook Neo: A18 Pro with 6-core processor and 5-core graphics 8GB Unified Memory, macOS Tahoe, X-Plane 12 (12.40). Mac mini: M4 chip with 10 core processor, 10 core graphics, 16 GB Unified Memory, 256GB SSD, macOS Tahoe, X-Plane 12 (12.40), X-Plane 11 (11.55). Lenovo Legion 5 16IRX9: Intel Core i9-14900HX, 32GB DDR5-4800 RAM, 1TB Micron NVMe SSD, NVIDIA GeForce RTX 4060 8 GB GPU and Intel UHD Graphics 16EU iGPU, Windows 11 Home, MSFS 2024 and 2020, X-Plane 12 (12.40), X-Plane 11 (11.55) and Lenovo LOQ 15 15IAX9: Intel Core i5-12450HX, 24GB DDR5-4800 RAM, 1TB Solidigm NVMe SSD, NVIDIA GeForce RTX 2050 4GB GPU and Intel UHD Graphics 16EU iGPU, Windows 11 Home, MSFS 2024 and 2020, XX-Plane 12 (12.40), X-Plane 11 (11.55). Alienware m15 R7: Intel Core i7-12700H, 16GB RAM, 1TB SSD, NVIDIA GeForce RTX 3070 Ti 8GB, Windows 11 Home, MSFS 2024 and 2020, X-Plane 12 (12.40), X-Plane 11 (11.55).
Archived
This topic is now archived and is closed to further replies.