October 15, 20223 yr Just now, Wothan said: Engine starts with 0.1.1b and SU10 works fine for me. Yeah same here. I think it's not working for some though. Wait, what - 0.1.1b? 7950X3D | RTX 4090 | 64GB DDR5
October 15, 20223 yr 4 minutes ago, Cpt_Piett said: Yeah same here. I think it's not working for some though. Wait, what - 0.1.1b? Yes. It was the patch to make 1.1 work with SU11 I believe. But, for me, it's borked it for SU10. Tried and tried.
October 15, 20223 yr 11 hours ago, ryanbatc said: Tail number is not recognized because cleared out the ATC ID line in the aircraft.cfg. I had to do this because otherwise you'll see a white dynamic registration display over top the hand painted one in the exterior view. There is a way around this if I use a custom panel.cfg but when I do this you get white screens with GNS or PMS gtn. I noted something about a panel.noreg in the new update but haven't read it yet. It may allow me to add the atc ID back in with a custom panel.cfg. Hi Ryan, Have posted a comment under your most recent KA conversion asking for a conversion of two other Nukem repaints; https://flightsim.to/file/3109/private-king-air-liveries Would appreciate if you could do a conversion und upload them as well. Thank you, Roland
October 15, 20223 yr I suppose it is very difficult for the dev to be trying to look after both those on SU10 and SU11 beta. I think the dev just needs to be clear on which update we should be using. I’m on SU10 (no way am I going beta) and have updated the KA350 to 1.1b because it was the latest available option and they sent me an email to this effect. I won’t be using the sim this weekend but I hope my King Air is not borked now as it was fine under the initial release. GregH Intel Core i7 14700K / Palit RTX4070Ti Super OC / Corsair 32GB DDR5 6000 MHz / MSI Z790 M/board / Corsair NVMe 9500 read, 8500 write / Corsair PSU1200W / CH Products Yoke, Pedals & Quad; Airbus Side Stick, Airbus Quadrant / TrackIR, 32” 4K 144hz 1ms Monitor
October 15, 20223 yr So is the latest update working now? Also the landing and taxi lights aren't very bright has that been fixed? I haven't updated yet. Running i5-9600K @ 4.8ghz - 32GB DDR4 3200mhz - GTX 3070.
October 15, 20223 yr Only did a short flight but v0.1.1b appears to be working with SU10 for me, no apparent issues with avionics or engines. Undercarriage lever a bit sticky was it, Sir?
October 15, 20223 yr I've got to tip my hat to the devs. I'd be close to just saying use Beta Sim Updates at your own risk. Must take a lot of time for these guys to get things sorted for those that jump into the beta updates. Jase Jaseman. Lovin it up here........ Catch us over at MassieSim32 -> https://discord.gg/B4buuHGhcr
October 15, 20223 yr 7 hours ago, Cpt_Piett said: Yeah same here. I think it's not working for some though. Wait, what - 0.1.1b? Still mulling this one as there are several other aircraft coming along. I noticed there is quite a range of Avionics in the package. On AP will it fly an ILS following a VNAV profile & make the transitions to lower altitudes automatically? I have the TDS GTN 750 & I presume if I established an ILS flight in MSFS scenario set up I would need to load the waypoints into the TDS, then manually load the VNAV data for each waypoint? Or can some part of the Avionics suite set up the VNAV profile for you? T45
October 15, 20223 yr 19 minutes ago, Treetops45 said: On AP will it fly an ILS following a VNAV profile & make the transitions to lower altitudes automatically? I have the TDS GTN 750 & I presume if I established an ILS flight in MSFS scenario set up I would need to load the waypoints into the TDS, then manually load the VNAV data for each waypoint? Or can some part of the Avionics suite set up the VNAV profile for you? It will utilize all the features of the TDN GTNXi. But the aircraft doesn't have VNV path though, so you have to manually descend either using V/S, IAS or the descent profile. If you load an ILS approach, all waypoints and VNAV date (altitude restrictions) will be loaded automatically. ... I'm on 0.1.1b now. Still now compatible with the TDS unfortunately. 7950X3D | RTX 4090 | 64GB DDR5
October 15, 20223 yr 3 hours ago, Cpt_Piett said: I'm on 0.1.1b now. Still now compatible with the TDS unfortunately. What do you mean? I'm on the lastest build, and the TDS works perfectly (w/ VNAV, btw). I've only seen someone showing something that looks like a graphics driver issue, but nothing with the KA.
October 15, 20223 yr 1 hour ago, BennetHill said: What do you mean? I'm on the lastest build, and the TDS works perfectly (w/ VNAV, btw). I've only seen someone showing something that looks like a graphics driver issue, but nothing with the KA. It's working most of the time. Occasionally it goes like this: 7950X3D | RTX 4090 | 64GB DDR5
October 15, 20223 yr 15 minutes ago, Cpt_Piett said: It's working most of the time. Occasionally it goes like this: If that is SU11 beta, and DX12 - there is a known bug from Asobo right now with WASM gauges (TDS GTNxi) | My Liveries | FAA ZMP | PPL ASEL | | Windows 11 | MSI Z690 Tomahawk | 12700K 4.7GHz | MSI RTX 4080 | 64GB 6000 MHz DDR5 | 500GB Samsung 860 Evo SSD | 2x 2TB Samsung 970 Evo M.2 | EVGA 850W Gold | Corsair 5000X | HP G2 (VR) / LG 27" 1440p |
October 15, 20223 yr 24 minutes ago, ryanbatc said: If that is SU11 beta, and DX12 - there is a known bug from Asobo right now with WASM gauges (TDS GTNxi) Yup. I had quite an embarrassing moment asking the same question to the TDS discord support channel both today and yesterday, lol. 7950X3D | RTX 4090 | 64GB DDR5
October 16, 20223 yr TDS GTNxi just stopped working today. All fine yesterday after 0.1.1b update but all of a sudden today I just get a blank screen on the GTNxi - black screen, not white, as if its not powered up. Anyone any ideas?
Archived
This topic is now archived and is closed to further replies.