9 hours ago, B777ER said:

If it gets us to the long overdue HJet update then yes.

Unlikely since it's different people working on them. Didn't realise the HJet has a "Long overdue" update.... ?

 

G

It's out now in the Marketplace.

Got mine updated... avionics seem to work nicely.

So far only CTD's and 27 liveries I don't want. Not sure I'm going to keep this. 

9 hours ago, St Mawgan said:

So far only CTD's and 27 liveries I don't want. Not sure I'm going to keep this. 

No CTD's here, but Autothrottle & VNAV getting very confused about it's performance.

 

G

My first few flights were a disaster but it seems to be better now. Odd as I haven't changed anything. 

WARNING!!! If you own the Longitude and have flown it, the VJ 2.0 may default to Longitude settings!!!

1. Basic Empty Weight will be at 10609 kg! Manually change this to 1610 kg on the Home > Utilities > Weight and Fule page.

2. VNAV climb profile will be at 270 kt/M0.800! Go to the VNAV Climb page(Home > Flight Plan > VNAV) and click on the top box once: it should instantly change to the correct default of 165 kt/M0.370.

3. Load may be at your last set load in the Longitude. My load was 8 pax: simply change the (entire) load on the W&B page to the correct load. (This only affects the load in the GCT for calculations and not the actual load.)

4. Some other settings may default to your Longitude settings like the default split and the MFD fields. This actually is quite convenient LOL!!! (but not as it should be).

Specially point 2 is of importance: if you don't change this FLC will not work as expected and you will overspeed into mach numbers shortly after take off already!

Another tip: each GTC defaults to the PFD. I myself have both screens split. In order to get things set up as you were used to 1. FIRST set the third GTC to NAVCOM and 2. only then set the second GTC to MFD. If you do it in another order you will get messages about split screens being used and panes not working immediately as you would expect requiering you to manually select panes with the knob... inconvenient. My adviced order will have you going with just 2 clicks.

Edited June 2, 20233 yr by tup61

15 minutes ago, tup61 said:

WARNING!!! If you own the Longitude and have flown it, the VJ 2.0 may default to Longitude settings!!!

1. Basic Empty Weight will be at 10609 kg! Manually change this to 1610 kg on the Home > Utilities > Weight and Fule page.

2. VNAV climb profile will be at 270 kt/M0.800! Go to the VNAV Climb page(Home > Flight Plan > VNAV) and click on the top box once: it should instantly change to the correct default of 165 kt/M0.370.

3. Load may be at your last set load in the Longitude. My load was 8 pax: simply change the (entire) load on the W&B page to the correct load. (This only affects the load in the GCT for calculations and not the actual load.)

4. Some other settings may default to your Longitude settings like the default split and the MFD fields. This actually is quite convenient LOL!!! (but not as it should be).

Specially point 2 is of importance: if you don't change this FLC will not work as expected and you will overspeed into mach numbers shortly after take off already!

Another tip: each GTC defaults to the PFD. I myself have both screens split. In order to get things set up as you were used to 1. FIRST set the third GTC to NAVCOM and 2. only then set the second GTC to MFD. If you do it in another order you will get messages about split screens being used and panes not working immediately as you would expect requiering you to manually select panes with the knob... inconvenient. My adviced order will have you going with just 2 clicks.

Thanks!

Is it me or did the VAMS page disappear from the MDF? I cant get the Bose headphones off the dash. 

1 minute ago, Poncho said:

Is it me or did the VAMS page disappear from the MDF? I cant get the Bose headphones off the dash. 

That's now an option on the tablet. 

I was ready for it....

But it wasn't ready for me.

Constant black screens...after reload, etc.

Can't hang with that.

21 minutes ago, dusty_sourdough907 said:

I was ready for it....

But it wasn't ready for me.

Constant black screens...after reload, etc.

Can't hang with that.

Most likely a conflicting mod. Currently being discussed in the FX support forum on their discord.  By any chance do you have this in your community?  An OLD deprecated version of the g3000

“you can delete navigraph-g3000-mod, its the beta version and its not being updated anymore”

Go to the support channel. You will find good support for your issue there.

-B. 

Edited June 2, 20233 yr by btacon

I have both planes but am most interested in the HJET which I fly exclusively these days.

sp

22 hours ago, btacon said:

Most likely a conflicting mod. Currently being discussed in the FX support forum on their discord.  By any chance do you have this in your community?  An OLD deprecated version of the g3000

“you can delete navigraph-g3000-mod, its the beta version and its not being updated anymore”

Go to the support channel. You will find good support for your issue there.

-B. 

The black screens is, as I have very recently discovered, all or shall I say...any aircraft with a screen, if you know what I mean.

Can't even get off the ground... consistently.

It's been like this for several days in a row.

Prior to...the Box performed decently.

Plus the scenery looks like *ss! Really bad!

Just about ready to walk from the console realm and go back to PC.

XBox just can't handle the truth!

Edit:

After reading/researching...it would strongly appear the issue is not so much with the Box, instead...with MSFS itself.

Several, like myself have observed a significant degredation in performance..black screens, etc. this past week.

Edited June 3, 20233 yr by dusty_sourdough907

I'd go with the HJET for now until the VJet gets worked out.

sp