March 13Mar 13 Source: iniBuilds 'v1.2.3 for the iniBuilds A350 Airliner is now available. This update focuses on a broad range of systems stability, navigation logic, and usability refinements across the aircraft. Numerous fixes have been implemented within the FMGS, flight planning, TCAS behaviour, performance calculations, and display formatting, alongside improvements to flight director behaviour, thrust logic, and waypoint management. Additional refinements have also been made to the ECAM, HUD behaviour, and various pages across the flight deck displays, improving accuracy and consistency during normal operations. The update is rounded out with art and sound improvements, including refined RA callouts, improved exterior audio balance, cockpit and cabin sound tuning, and adjustments to cabin lighting and visual behaviour. This update can be downloaded via the iniManager. ____________________________________________________________ V1.2.3 SYSTEMS ⚙️ FIXED WASM crash after selecting STAR FIXED TCAS triggering from aircraft which are non factors FIXED Pitch jerkiness when passing through 10° with constant stick input FIXED Manually entered CRS shows in small font in the A350 FIXED TCAS returns all defined as "HEAVY" FIXED D-ATIS not timing out FIXED Inaccurate colours on SEC/PERF/APPR page FIXED OPT FL should be shown every 500ft FIXED Waypoint revision logic on Active, Temporary, and Wind pages FIXED Position/Report page formatting issues FIXED Flightplan STEP ALTs page logic/format FIXED Time marker should be in chronological order FIXED Font & sizing issues on PERF approach page FIXED Key input not masked anymore in simconnect FIXED Loadsheet formatting FIXED Flight Director sensitivity FIXED PDC response not being received from HOPPIE connections FIXED Dest ETA/ Wpt ETO not updating correctly (same time for multiple waypoints) FIXED Cost Index logic FIXED Letter "D" missing from ANF font FIXED HUD not displaying all the information all the time / Switch start state FIXED VD - missing magenta area FIXED Waypoint selection menu not showing for duplicates FIXED Inserting CMS by writing the waypoint name on ACTIVE/F-PLN/VERT REV/CMS page not working as expected. FIXED Moving thrust levers from CL to MCT detent & back to CL detent during CLB FMS now cancels derated thrust. FIXED Spoiler panel jitters rapidly while deployed in flight FIXED Misspelling waypoint in DATABASE WPTS page causes the page to go blank FIXED Constraints & altitudes below the TL be shown in feet instead of FLs FIXED ECAM AIR PACK 1(2) OFF fault error when performing packs off takeoff FIXED Inconsistencies in the display of planned speed on the CRZ/FPLN pages FIXED Trim not resetting correct direction after landing FIXED RA logic on touchdown FIXED PLACE DISTANCE WAYPOINT not working with negative distances FIXED "NONE" appearing in the middle of the procedure list instead of at the top FIXED SURV Controls - Switching the ADS-B RPTG should not switch the ADS-B TRAFFIC FIXED Inserting "1" as a CRZ FL on the ACTIVE/PERF/CRZ page should insert the current altitude as an CRZ altitude FIXED VD planned path incorrect given altitude restrictions. FIXED Sec airways inserting double airways when no intersection found FIXED RWY CONDITION / BRAKING not appearing on SD FIXED Step descent logic FIXED Return button behaviour on Step alt page FIXED ECAM COMPANY MSG memo for TELEX messages not clearing (internal only) FIXED Range Switching behaviour from ROSE/PLAN to ARC modes & vice versa FIXED Multiple amber arc indicating hottest wheel brake ART 🎨 FIXED Cabin windows flickering FIXED Cabin lighting turns off instead of dimming on "medium" & "dim" settings FIXED No difference between low & medium dim in cabin modes SOUND 🔊 FIXED RA callouts refined across all tracks/volume and attenuation balanced per community feedback FIXED Tie APU external sound to "external engines" volume slider FIXED Quiet exterior sounds in 2020 FIXED Refined gear extension sounds in cockpit and cabin when landing FIXED "Autobrake Off" callout not sounding after touchdown iniBuilds Team ❤️ 'It is better to be silent and be thought a fool than to speak and remove all doubt.'
March 14Mar 14 FIXED TCAS triggering from aircraft which are non factors My TCAS is going off more then ever now due to this update. Dan i9-13900K / Asus Maximus Hero Z790 / RTX 4090 FE / G.Skill Trident Z5 RGB 64 GB DDR5-6400 CL32 / Artic Liquid Freezer II 360 / Samsung 980 PRO SSD 1TB PCIe NVMe M.2 / Samsung 980 PRO SSD 2TB PCIe NVMe M.2 / Samsung 970 EVO Plus SSD 2TB PCIe NVMe M.2 / EVGA 1000W G3, 80+ Gold / Phanteks Eclipse P600S ATX Mid Tower / Arctic P14 PWM Case Fans / LG C2 42 Inch Class 4K OLED TV/Monitor / Windows 11 Pro / 1Ghz AT&T Fiber
March 14Mar 14 Stear clear of this update. It introduces a nasty bug that puts the aircraft in DES mode on climb out after take off instead of CLB mode, until you set the MCP target altitude to your cruise altitude. Until this is fixed I would not download this "patch". Inibuilds and their subpar release testing....
March 14Mar 14 13 minutes ago, Farlis said: Stear clear of this update. It introduces a nasty bug that puts the aircraft in DES mode on climb out after take off instead of CLB mode, until you set the MCP target altitude to your cruise altitude. Until this is fixed I would not download this "patch". Inibuilds and their subpar release testing.... So i either set my altitude to the initial one set by ATC, or i put in the cruise altitude. In no situation do i takeoff without having something set. Sounds like this bug wouldn’t impact me? 7950X3D | RTX 4090 | 96GB DDR5 | 4K G-Sync | Win11 Pro
March 14Mar 14 Author 6 minutes ago, RobJC said: i put in the cruise altitude. In no situation do i takeoff without having something set. Sounds like this bug wouldn’t impact me? 'Yes as a workaround you can enter crz fl again' - Source The bug is officially confirmed. Fix follows. 'It is better to be silent and be thought a fool than to speak and remove all doubt.'
March 14Mar 14 11 minutes ago, RobJC said: In no situation do i takeoff without having something set. Unless you have it set to your cruise altitude you will get the bug.
March 14Mar 14 Oh ini. You are your own worst enemy. A. Ortega AMD Ryzen 7 9800X3D Processor, MSI MAG B850 Tomahawk MAX WiFi Motherboard, Samsung 980 Pro 2TB SSD, Samsung 870 4TB SATA, Nvidia GeForce RTX 5090 Founders Edition Video Card, Rosewill VMG 1000W 80+ Gold Power Supply, Phanteks XT Pro Ultra Mid-Tower Gaming Chassis, Windows 11 x64 Home, 2.5gb fiber ISP.
March 15Mar 15 3 hours ago, Farlis said: Stear clear of this update. It introduces a nasty bug that puts the aircraft in DES mode on climb out after take off instead of CLB mode, until you set the MCP target altitude to your cruise altitude. Until this is fixed I would not download this "patch". Inibuilds and their subpar release testing.... Happened to me earlier on my first flight since the update. Hopefully, the fix is available quickly. Does make you question what sort of testing (or lack of) went into the update as it's a pretty big and obvious bug.
March 15Mar 15 6 minutes ago, james42 said: Happened to me earlier on my first flight since the update. Hopefully, the fix is available quickly. Does make you question what sort of testing (or lack of) went into the update as it's a pretty big and obvious bug. Is it really? If ATC tells you to follow the SID departure, you are going to enter your cruise altitude. If ATC provides an initial altitude (say 4,000 feet) you enter that. In either case is this bug going to show up? I can see how this could be missed based on typical use cases for takeoff in the A350, but maybe i am wrong! 7950X3D | RTX 4090 | 96GB DDR5 | 4K G-Sync | Win11 Pro
March 15Mar 15 9 hours ago, RobJC said: Is it really? If ATC tells you to follow the SID departure, you are going to enter your cruise altitude. If ATC provides an initial altitude (say 4,000 feet) you enter that. In either case is this bug going to show up? I can see how this could be missed based on typical use cases for takeoff in the A350, but maybe i am wrong! I had 3000 set on the FCU, which was the stop altitude of the SID I was flying. Either way, its a pretty serious bug that needs to be rectified quickly.
March 15Mar 15 14 hours ago, RobJC said: Is it really? If ATC tells you to follow the SID departure, you are going to enter your cruise altitude. If ATC provides an initial altitude (say 4,000 feet) you enter that. In either case is this bug going to show up? I can see how this could be missed based on typical use cases for takeoff in the A350, but maybe i am wrong! No. the top end of the SID is not the cruise altidude. Lets say I am flying out of Boston to MSP with a cruise altitude of FL370. All the SIDs at BOS have a top of 5k. On Vatsim, usually departure will then clear you to 14k. It sounds like dialing in 5k on the FCP causes the bug. What it sounds like its happening is the plane wants you to set FL370 and not 5K in the FCP.
March 15Mar 15 4 minutes ago, BrammyH said: No. the top end of the SID is not the cruise altidude. Lets say I am flying out of Boston to MSP with a cruise altitude of FL370. All the SIDs at BOS have a top of 5k. On Vatsim, usually departure will then clear you to 14k. It sounds like dialing in 5k on the FCP causes the bug. What it sounds like its happening is the plane wants you to set FL370 and not 5K in the FCP. Ah interesting. Yeah that is serious. I am sure they will fix it quickly. 7950X3D | RTX 4090 | 96GB DDR5 | 4K G-Sync | Win11 Pro
Create an account or sign in to comment