radorabatin

Hello my is working fine with my 75” LCD Rado

Hello Mal, I have the same issue,I reported it back to PMDG, what temporarily helped me was installing it to FSXSE by selecting installation option for FSX. (only in case you run single installation with FSXSE) Rado

This is not true, my steam FSX folder is full of addons, I needed to reinstall FSX-SE last week after removing old FSX and what I did was only copy back FSX SE folder back from temporary location and started fsx.exe,steam just checked files integrity and than FSX-SE started without any issue. I also keed original FSX-SE instalation on backupdrive and when needed I use it,so I don't have to update it. Of course,If FSX SE is updated than there will be version mismatch, but steam will probably take care of it. The same thing happened with my train simulator 2015 from dovetail,I just moved it to different drive and started, steam took care of it without downloading anything. Rado

After years of hesitating I decided to switch to dx10 with steve's dx10 fix and I'm done with OOMs in 777, I've increased graphics details to maximum, no issues with pmdg and sceneries,yet. Rado

Hello,I fixed null zones oscilations on my Saiteks by oiling mechanical parts (nothing to do with oscilations) and cleaning electrical parts with 100% ethanol,which helped much,and Saiteks started to behave like new,and it still lasts. In terms of stutters: I have similar setup like you,gpu is nvidia 780, performance is great but stutters...What helped me was external fps limiter not the NI one, VSYNC 1/2 refresh rate and yestarday I played with maximum prerendered frames and setting 1 gave me beautiful and smooth experience. So that is my experience :-), Rado

Hello Guys, while I was using for reverse F2 or FSUIPC command Throttle dec slowly, it worked fine,minimum delay. But since I have axes assigned to FSUIPC reverser axes for reverse, I experience the same behavior, with 777 I only experience delay of reverse,until nose gear touches down, Rado

I can confirm Ryan's statement regarding Emirates, as many of my friends fly 777 for them :-), and company cruise cg setting for 200LR is 20 :-), Rado

I had the same issue, yestarday. For me reason was failed internet connection, during that period I started FSX and experienced this failure. Once internet was restored FSX started without any issue. Rado

Hello, I have all axes assigned via FSUIPC, axis set, except of flaps, everything works fine,no issues. Rado

Hello,I had the same issue, I found entry responsible for it, in FSUIPC4.ini under [JoystickCalibration] and delete entry Flaps=-16383,16384/16 or any values you have there. Flaps axis should be assigned via FSX not FSUIPC, and this entry also causes the same problems to 777. hope this helps :-) Rado

Hello everybody, just to add my freezing experience, repeatedly 777 crashes after pushing TOGA button while on approach, I saw somebody above reporting the same issue. That is the only freeze I experience,also FSUIPC autosave is causing mu stutters during saving process, my PC is high end with SSDs only. Rado

Thank you hopskip, with help of Ryan support I detected this problem,exactly as you describe, I deleted flaps detents and calibration and problem disappeared. Rado

Hello,I fly IVAO, but described event occurs also offline. Looks like fsuipc.ini corruption, I'm going to rebuild it from scratch, And will see.... Rado

Hello everybody, did anyone of you experience event described below? I take off with NGX (any variant), aircraft climbs normally, but when I retract flaps engine thrust starts to be insufficient to maintain IAS (engines at TOGA power), and acft stops climb. In external view(and wingviews) wings are not bended,they are straight like on the ground. Than I set flaps again,doesn't matter which configuration, and than aircraft returns to normal behavior. I also experienced this problem with 777, recently. I use win7 x64, high end pc with ssds, I use activesky Next,fsuipc,REX 4 and so on...addon sceneries . All SW is up to date. Thank You Radoslav

Hello everybody, did anyone of you experience event described below? I take off with NGX (any variant), aircraft climbs normally, but when I retract flaps engine thrust starts to be insufficient to maintain IAS (engines at TOGA power), and acft stops climb. In external view(and wingviews) wings are not bended,they are straight like on the ground. Than I set flaps again,doesn't matter which configuration, and than aircraft returns to normal behavior. I also experienced this problem with 777, recently. I use win7 x64, high end pc with ssds, I use activesky Next,fsuipc,REX 4 and so on...addon sceneries . All SW is up to date. Thank You Radoslav

I have the same issue,Q-twice solves the problem :-) Rado

Are you sure you didn't blow some of your tyres? Rado

The same with me and my core 2 duo 8500@3,8ghz,and ati4870 behaves excellently even on heavy addon megaairports!!! great job PMDG!!! Rado

Kind of funny, but my pc with overclocked core 2 duo to 3,8ghz, 4gb RAM and ati4870 runs FSX smoothly and even PMDG products run very well, only water is on 1xhigh, and no traffic because I fly IVAO, so I wouldn't be affraid to have such a config you're describing :-) Rado Sent from my iPhone using Tapatalk - now Free

Hi all, just to add my experience, I fly only heavymetal, I enable trackir from startup till after takeoff, and than for landing and taxi. Initial trouble with nausea and oscilation of flown trajectory went away after few training circuits :-), what trackIr did for me is interesting: In 2009 I tried 737 level d sim in Malev training center, as a flightsim pilot I had trouble to flare, since I have a trackIr I don't have this problem, my last year session in CSA training center confirmed it, I had no trouble to determine visual approach path, no problem with flare and landing at all, it was 737-800 level d sim, so trackir brought another level of skills for me. Rado

Hi All, I use ASE with 10 layers and REX clouds at 1024 lowered from 4096, and I'm having nice preformance. My frames are locked at 20(most of time stable at 20).I use UT,GE and REX, airports mostly default because of my config. Water at 1max because any of shader 2 are killing my frames.NGX runs smooth on my config which is E8500 at 3.16GHZ, 4GB of RAM,ATI4870 GPU with 512VRAM, My FSX is installed on E drive in nondefault folders and on Intel SSD, until I buy new PC I'm happy with performance of my PC, FSX settings are almost on highest except of water, and traffic, autogen very dense and scenery complexity on max. Using external frame limiter. Rado

Hello All, my hotfix works fine so far,after installation I reinstalled liveries and restarted pc. No problems so far. Rado

Hello Man, I will send you all data tomorrow,as I'm going to sleep. Rado

I have old system with E8500 not overclocked, ATI4870 and 4GB RAM, and only thing I have to avoid is complex addon sceneries airports a la EDDF etc...My NGX runs most of the time with fps at 20 (locked at 20 by external limiter).******* tweaks didn't help me, so I just made rebuild FSX.CFG made some modification according PMDG manual,chapter performance, and I'm very very happy how it runs. I will buy new pc next year, but until now I can enjoy my NGX,btw I use water 1x high,ASE and UT and REX textures. Rado

Hello, if I'm not mistaken VRS F18 has some nice engine effects, but not sure of shimmer. Rado