Jump to content

Lindy1958

Frozen-Inactivity
  • Content Count

    62
  • Donations

    $0.00 
  • Joined

  • Last visited

Everything posted by Lindy1958

  1. BIG MISTAKE! I purchased this very poorly put together 777 today. WHAT A DISAPPOINTMENT! As mentioned previously, the FMS still reports the B747-8i. The engine status and fuel pages on the EICAS report 4-engines! The FMS gives no stab trim setting information when setting up a flight plan. The LNAV and VNAV don't hold heading or altitude, respectively. They wobble left and right, up/down in flight. I suspect this may be a result of the extra two engines not being read as running, In flight the airplane YAWS to the LEFT (odd, since the phantom 2 dead engines are on the right...), All-in-all, a VERY disappointing add-on for MSFS, They should be refunding EVERYONE'S money for fielding such a poorly tested and performing aircraft! Can't wait for PMDG's first MSFS aircraft! You know that'll be put through vigorous testing prior to launch!
  2. I looked on BOTH Navigraph and FSAeroData and do not see a listing for the Vertxsim DA62 on either . Is it listed under another system or name? Eric
  3. I have to tell you - I am VERY disappointed with this aircraft. Especially at the price point they are selling it! It's SO buggy and SO not user-friendly! For example, you cannot save FMS flight plans, the autopilot does not support speed control, it's just frustrating to fly! It's destined to be a disappointing "hangar queen" in my livery! Junk, IMHO.
  4. PM me and I will walk you though what I do. Maybe it will help, however, as I use FS-Inn, it may not be helpful to publish my work around here. - Regards, Eric Faber
  5. Well, as mentioned in an earlier post, I have had serious problems with FSX and QOTSII crashing, especially after positioning the Queen at an airport, booting up ActiveSky, and then booting FS-Inn/Co-pilot via the addon menu. Essentially, FSX would crash as soon as I energized FS-Inn. This problem only seemed to arise when I chose a version 3 of PMDG's QOTS or the PMDG B-777. FSX and FS-Inn worked fine when selecting the older, version 2 PMDG 747 or the MD-11. Only when selecting the newer QOTSII or the B-777, have I experience FSX crashes to desktop. (Houston - We May Have a Solution (at least for FS-Inn users): Now, as of this moment, I have had great success, and am been able to fly both of the PMDG QOTSII and B777 if I boot-up FWinn.exe and FSFDTCP.exe (the radios) OUTSIDE of FSX (before actually booting FSX up). Simply booting these programs up, before activating FSX, seems to allow use of the PMDG B777 and QOTSII. I have the latest FSUIPC version loaded (4.971) and latest version of all PMDG aircraft, as reported my the PMDG Operations Center. Maybe my solution will help some of you who seem unable to "fly" your newer PMDG aircraft in FSX. If you don't use FS-Inn, maybe booting your VATSIM client prior to loading FSX will help you also. I just tried to think "outside the box" when trying to solve this problem - and finally came up with a workaround solution that seems to help me, and may help a few other sim-enthusiasts. Eric Faber
  6. Over the past few days, I too have been experiencing the same crash to desktop with the QoTS-II. However, it (QoTS-II) seems to crash to desktop ONLY when I initiate FS-INN / FS Co-pilot. I can get as far as selecting my airport and selecting the aircraft, but as soon as I initiate FS-INN/Co-pilot, the sim crashes. Post Script: ---- AFTER Uninstalling Windows update KB4038788, my FSX seems to be working fine! FS-INN / Co-pilot booted up without incident and all my other payware aircraft seem to be working as well. The issue, for me, MAY have been between FS-Inn, Co-Pilot, and possibly FSUIPC not playing nicely with Windows update KB4038788. ----- Eric Faber / QOTSII purchased 2/1/2017
  7. I get the shaking at cruise also, but I do not and have never used ezdok software. Any suggestions? I've tried tweaking AS16, but no joy.I've also reducing cruise speed. Also, no joy. In FSX, I use the following add-ons: AS16, FS-Inn, Accu-feel, RAAS, GSX, and of course the most current FSUIPC. Any suggestions that may help me smooth out the flight will be appreciated. Oh, and I've also turbulence and aerodynamic shaking are disabled in the PMDG Aircraft (page #9) of Simulation setup within the FMS. I've attached a screenshot which may give you some idea of what I'm experiencing. You can see the vector (dashed line on NAV map) flicked off to the left in the pic. When at cruise, I the aircraft shakes mildly and the vector needle flips back and forth, from left to right, continuously. Any suggestions / solutions are appreciated. Thank you. Eric Faber
  8. Just ran the Ops Center and there's no trace of the BCF mod - yet.
  9. After almost 2 days of trying everything, including getting help from Paul @ support, I was able to get up & running - & authenticated by the licensing server. Essentially, all I did was: - completely un-install the QOTS-II, - restart my system, - disabled my anti virus & firewall - kept the Windows (persistent) firewall off - reinstalled QOTSII, - fired up FSX (ONLY), - Selected an FSX / Microsoft generic plane, - positioned myself on low-VAS generic airport, - selected the QOTSII aircraft, - got the licensing messages & filled in my install key, - (do this last) restarted my anti virus& firewall, did a quick scan, - then - got my license verified, and went flying in this beautiful beast! Maybe these step will help you, if you're having activation problems. I will say that Paul (at product support) was very timely with responding & deserves (at least) a case of his favorite libation! Eric Faber Longtime PMDG Enthusiast
  10. Can anyone tell me how to order/obtain extended download service for the 737 series and 777 aircraft? I'm having troubles with mine, especially the 737 nav radio digits not displaying past the .8 (i.e., no 113.80, only 113.8 is shown). I'd appreciate the help. I'd also like to install my aircraft into FSX-Steam, so, I'm guessing I'd need the extended download service for all aircraft I want to install, or is it just a one time fee? Anyway, I look forward to a solution. Eric Faber
  11. Hello, I own the MD-11, B-747-400 & -800, the 737s, and the JS-4100. How can I purchase an extended download service so I may install these aircraft in FS-Steam? Thank you. Eric Faber
  12. Thanks RickB1293! That did the trick. I appreciate it. However, I will say I did as the install notes said and deleted all 777 flightplans prior to the last re-install. So, I guess the the next test will be to see if the probelms rears its ugly head, following placing new flightplans in the 777 folder. Thanks again. I should have been able to figure that out on my own, but guess I was suffering from "brain up & locked" syndrome! All the best, Eric Faber
  13. that's no REALLY a solution...it's a work-around. The "issue" needs to be resolved, if indeed it is an issue. Eric Faber
  14. Well, it's been over 2 weeks now, and still no answer or response to this problem I'm having! Kinda puts a damper on so-called "custome forum support.".....
  15. I thought I saw someone else post this same issue. However, when I came back to the forum, after verifiying that I do indeed have a problem, I have not been able to find the post. Sorry if this is a duplicate posting (if that's the case). Anyway, I've got both -200 & -300 models, with current updates installed, according to the ops center. My problem is that when I select "Request Route/or routing" button, FSX immediately crashes. This has happened at least three times today already. Not sure what the cause is, but sure would be happy if someone is able to help. I did not have this problem, until after installing the recent update for the -300. Thanks in advance!, Eric Faber FDC459
  16. Lindy1958

    Clock Time

    Well, after totally unistalling both -200 and -300 models...doing a reboot, and re-installing both, I still get different UTC times between the panel clock and the UTC time and ETAs, etc., in the FMS. Is there something I've missed? Not sure how to delete my old saved panel states....that probably has something to do with it... Any concrete assistance, other than "mayby this or that" thoughts would be much appreciated. Also, PMDG folks may want to consider programming subsequent installers to automatically delete, or offer the user a place to save previous panel states...during the install of, say, SP-1c. This would possibly alleviate issues like this happeneing to people who do not read install "Readme" files, prior to installing an update (such as me). A was under the (wrong) assumption that user-friendly installers would be programmed to make the install as worry-free as possible for the customer. Anyway, help is appreciated. I could not figure out how to attach a screenshot, otherwise, I would have.... Eric Faber FDC459
  17. Lindy1958

    Clock Time

    Thanks, I will check that out.
  18. Lindy1958

    Clock Time

    Ever since I updated to the new version 1.10.6036, my clock has been continuously off zulu/UTC time. I've gone into FSX's time/day and checked, but FSX seems to be showing the correct day & time, etc. However, my clock in the 777 has been off by about 7 1/2 hours from UTC. I've looked in the settings for each 777 setup via the Operations Center, but everything there seems okay. I am not able to refer to or rely on the clock on my panel for the correct time at all. This one's got me frazzled for sure! Any pointers woud be appreciated. Thanks Eric Faber FDC459 777-200 & 777-300 Owner
  19. I've had this same issue, since installing the 777. I've done all the checks as outlined here, but still cannot get FS-Inn to bootup without using the Trike or a basic aircraft, before trying to bootup FS-Inn from the Addons menu of FSX. I'm thinking it's a problem with FS-Inn & not the 777, as I had absolutely no problems with FS-Inn and the PMDG 737 or any other plane, until the 777. If there's a support staff with a pulse for FS-Inn any longer, I'm not aware of them. If anyone here has gotten any recent help from the FS-Inn people, sure would be nice to hear about it.
  20. Thank goodness for this fix! That bug has been driving me crazy on long haul flights!
  21. I tried to change door #4 to cargo also, but had no luck using the GSX editor or doing it manually. It looks to me like that rear cargo door - aft of the left wing - is assigned as a pax door in the original texture. I'm not sure how to change that either, so I guess I'll wait for the FSDT people to sort it out. The door is easily opened (from the FMS Menu), but cannot be assigned as a cargo loading door.
  22. Yep, sure would be nice to be able to move the displays arounf like we can with the other aircraft.
  23. On this particular cargo model, there's also a larger cargo door that opens up on the rear, pilot's side that is not configured yet with the cfg mod provided. Other than that, the mod workx fine for me. Thanks again.
  24. Thought your profile said you completely deleted FSX from your computer....is PMDG making the Trip-7 for XP-10???
×
×
  • Create New...