June 10, 20169 yr No problem Rich but this one was pushed by ORBX ;-) No manual download just via FTX central and there update routine. You could ask at the FTX forum but it seems to working fine here local but not tested extensively... Thanks Buddy - been searching but nothing official there - have to look some more but it sounds like its not an issues - thinking its fine and doesnt need to be updated :wink: Rich Sennett
June 10, 20169 yr Hi, Rich, if you start P3D now, it will give you the option to update the object flow. Then close and re-start the simulator. Cheers, Ed Cheers, Ed MSFS2020 Steam // Rig: Corsair Graphite 760T Full Tower - ASUS MBoard Maximus XII Hero Z490 - CPU Intel i9-10900K - 64GB RAM - MSI RTX2080 Super 8GB - [1xNVMe M.2 1TB + 1xNVMe M.2 2TB (Samsung)] + [1xSSD 1TB + 1xSSD 2TB (Crucial)] + [1xSSD 1TB (Samsung)] + 1 HDD Seagate 2TB + 1 HDD Seagate External 4TB - Monitor LG 29UC97C UWHD Curved - PSU Corsair RM1000x // Thrustmaster FCS & MS XBOX Controllers
June 10, 20169 yr Hi, Rich, if you start P3D now, it will give you the option to update the object flow. Then close and re-start the simulator. Cheers, Ed Awesome Ed - thanks Brother :wink: Rich Sennett
June 12, 20169 yr hey guys, I've read that Aerosoft airports such as Anchorage X had issues in P3D with regards to the runway lights. I'm using 3.3.5 and PANC it's working great including the runway lights. Is it because of the hotfix LM released ? This is the first time I'm trying this scenery in P3D, so sorry if it used to work before v3. cheers -E Enrique Vaamonde
June 12, 20169 yr Hi all, kinda out of the loop since I gave up flying for a while after multiple problems in 3.2. Considering getting back into it now. Can anyone tell me if I should update all 3 installers to 3.3.5 or would client only do? Also apart from objectflow is there anything else that needs to be updated to work correctly? ASN and REX? Thanks in advance. Regards, Shanan ASUS Z170 PRO, I7 6700K @ 4.85ghz (HT ON), ZOTAC AMP EXTREME 1080TI GTX (OC), 16 GB DDR4 G.SKILL TRIDENTZ RGB @ 3230MHZ CL 16-17-17-33 (OC) 4X SSDS : WIN 10 (NVME 960 EVO) + P3D + OTHER GAMES, 2X WD BLACKS RAID 0 + 1 SEAGATE BARRACUDA, CORSAIR AX860i PSU, CORSAIR 760T CASE (BLACK), 27 INCH IPS PREDATOR GSYNC 165HZ 1440p + 24 INCH IPS DELL 1080p, THRUSTMASTER HOTAS FCS THROTTLE + FCS16000M CORSAIR K95 RGB + CORSAIR M65 RGB + CORSAIR MM800 POLARIS RGB, CORSAIR H115i v2, CREATIVE GIGAWORKS 7.1 + ASUS D2X XONAR
June 12, 20169 yr Hi all, kinda out of the loop since I gave up flying for a while after multiple problems in 3.2. Considering getting back into it now. Can anyone tell me if I should update all 3 installers to 3.3.5 or would client only do? Also apart from objectflow is there anything else that needs to be updated to work correctly? ASN and REX? Thanks in advance. Regards, You should install Client and Content. Scenery is not that important, unless you see something useful to you in the "What's new" section on the Learning Center of P3D. Content is good to update, as some addons could be broken if not installed (FSDT, for example, and others with menus inside P3D). Cheers, Ed Cheers, Ed MSFS2020 Steam // Rig: Corsair Graphite 760T Full Tower - ASUS MBoard Maximus XII Hero Z490 - CPU Intel i9-10900K - 64GB RAM - MSI RTX2080 Super 8GB - [1xNVMe M.2 1TB + 1xNVMe M.2 2TB (Samsung)] + [1xSSD 1TB + 1xSSD 2TB (Crucial)] + [1xSSD 1TB (Samsung)] + 1 HDD Seagate 2TB + 1 HDD Seagate External 4TB - Monitor LG 29UC97C UWHD Curved - PSU Corsair RM1000x // Thrustmaster FCS & MS XBOX Controllers
June 13, 20169 yr You should install Client and Content. Scenery is not that important, unless you see something useful to you in the "What's new" section on the Learning Center of P3D. Content is good to update, as some addons could be broken if not installed (FSDT, for example, and others with menus inside P3D). Cheers, Ed Thanks. Will probably update everything in that case. Edit : Scratch that. I just remembered I would have to reinstall all addon scenery if I did that. The only scenery change is some fix for those with 32 bit Windows isn't it? Shanan ASUS Z170 PRO, I7 6700K @ 4.85ghz (HT ON), ZOTAC AMP EXTREME 1080TI GTX (OC), 16 GB DDR4 G.SKILL TRIDENTZ RGB @ 3230MHZ CL 16-17-17-33 (OC) 4X SSDS : WIN 10 (NVME 960 EVO) + P3D + OTHER GAMES, 2X WD BLACKS RAID 0 + 1 SEAGATE BARRACUDA, CORSAIR AX860i PSU, CORSAIR 760T CASE (BLACK), 27 INCH IPS PREDATOR GSYNC 165HZ 1440p + 24 INCH IPS DELL 1080p, THRUSTMASTER HOTAS FCS THROTTLE + FCS16000M CORSAIR K95 RGB + CORSAIR M65 RGB + CORSAIR MM800 POLARIS RGB, CORSAIR H115i v2, CREATIVE GIGAWORKS 7.1 + ASUS D2X XONAR
June 14, 20169 yr I just remembered I would have to reinstall all addon scenery if I did that. The only scenery change is some fix for those with 32 bit Windows isn't it? This what the release notes say. But it is not required to re-install all your addon sceneries. Those remain untouched even if you update scenery. Just make a copy of scenery.cfg - just in case... If you use texture addons such as FTX Global or GEP3D, those must be re-installed as the update will obviously overwrite the texture files. If you just update client and content, you only need to re-install REX textures and 3rd party autogen files. Regards, Chris -- PC: Intel 13900K, Gigabyte Geforce RTX 4090, 64GB Fury Beast DDR5 RAM; Display: Varjo Aero VR
June 15, 20169 yr This what the release notes say. But it is not required to re-install all your addon sceneries. Those remain untouched even if you update scenery. Just make a copy of scenery.cfg - just in case... If you use texture addons such as FTX Global or GEP3D, those must be re-installed as the update will obviously overwrite the texture files. If you just update client and content, you only need to re-install REX textures and 3rd party autogen files. Yes I meant FTX global. I will skip the scenery update for now. Shanan ASUS Z170 PRO, I7 6700K @ 4.85ghz (HT ON), ZOTAC AMP EXTREME 1080TI GTX (OC), 16 GB DDR4 G.SKILL TRIDENTZ RGB @ 3230MHZ CL 16-17-17-33 (OC) 4X SSDS : WIN 10 (NVME 960 EVO) + P3D + OTHER GAMES, 2X WD BLACKS RAID 0 + 1 SEAGATE BARRACUDA, CORSAIR AX860i PSU, CORSAIR 760T CASE (BLACK), 27 INCH IPS PREDATOR GSYNC 165HZ 1440p + 24 INCH IPS DELL 1080p, THRUSTMASTER HOTAS FCS THROTTLE + FCS16000M CORSAIR K95 RGB + CORSAIR M65 RGB + CORSAIR MM800 POLARIS RGB, CORSAIR H115i v2, CREATIVE GIGAWORKS 7.1 + ASUS D2X XONAR
July 10, 20169 yr Is the latest version of Prepar3D 3.3.5.17625? is 3.3.5 a full version or just a hotfix of version 3.3.3? I'm confused. ASUS ROG Maximus Hero XII ▪︎ Intel i9-10900K ▪︎ NVIDIA RTX 3090 FE ▪︎ 64GB Corsair Vengeance RGB Pro ▪︎ Windows 10 Pro (21H1) ▪︎ Samsung 970 EVO Pro 1TB NVME SSD (OS Drive) ▪︎ Samsung 860 EVO 2TB SATA SSD ▪︎ Seagate 4TB SATA HDD ▪︎ Corsair RMx 850W PSU
July 10, 20169 yr Yes, Prepar3D 3.3.5.17625 is the latest Whole Version of Prepar3D, Everything is Included
Create an account or sign in to comment