May 23, 20197 yr Commercial Member 3 hours ago, Ed_S_Pilot said: Where do i find that in my registry? I looked but did not see it ? Sorry, did a search, I believe im good on all counts. Thanks, Ed https://docs.microsoft.com/en-us/dotnet/framework/wpf/graphics-multimedia/graphics-rendering-registry-settings You can find the information in the link above. We still don't know your hardware and settings used for P3D. Regards Simbol Oficial Website: https://www.FSReborn.com Discord Channel: https://discord.gg/XC82TqvKQ3
May 23, 20197 yr 3 hours ago, tooting said: could you recommend a fiber setting for 30hertz vsync on tb on frames set to unlimted. thanks Start with what Nyxx wrote. If you see blurries when flying you might try FFTF Dynamic : Use AGL 0 ft = 0.01 5000 ft = 0.25 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
May 23, 20197 yr 7 hours ago, Ray Proudfoot said: @av8r13 I didn't delete my prepar3d.cfg or make any other changes except deleting the contents of the shaders folder Word of warning about not deleting your .cfg For weeks I had a problem with 4.5 where P3D lost windows focus. Sometimes I could interact with the app through the mouse, other times I couldn't. After trying loads of things, I decided to generate a fresh .cfg but save my old one so I could keep my custom mods. It transpired that some of the (graphics) statements had changed from true/false to 0/1. A new cfg solved the issues My p3d.cfg had become an iteration of triggers broom! Just saying Edited May 23, 20197 yr by kand
May 23, 20197 yr Moderator @kand, everyone has different configurations. I had a flight this morning and everything was fine with my original cfg. Ray (Cheshire, England). System: P3D v5.3HF2, Intel i9-13900K, MSI 4090 GAMING X TRIO 24G, Crucial T700 4Tb M.2 SSD, Asus ROG Maximus Z790 Hero, 32Gb Corsair Vengeance DDR5 6000Mhz RAM, Win 11 Pro 64-bit, BenQ PD3200U 32” UHD monitor, Fulcrum One yoke, Fulcrum Throttle Quadrant. Cheadle Hulme Weather website.
May 23, 20197 yr 3 hours ago, Nyxx said: You don't need one with FPS set to unlimited Pete. Unlimited = Fiber set to 0.01 or some say 0.10. IMO you add one when you lock FPS within the sim as the Fiber makes P3D run the same as if you had FPS set to unlimited. If you don't add it with FPS locked within the sim, you will not see it put the sim works with one set to .033 = 33% of every second is dedicated to loading textures. Hence why people go from unlimited to locked they said, I lost my FPS! 44 minutes ago, GSalden said: Start with what Nyxx wrote. If you see blurries when flying you might try FFTF Dynamic : Use AGL 0 ft = 0.01 5000 ft = 0.25 Thank you very much
May 23, 20197 yr 14 hours ago, av8r13 said: - Was happy when the hotfix finally came out. installed client,content,scenery as instructed As instructed by Elaine Dixon / poppet @ LM - the recommended procedure is to uninstall client (answering "no" when asked if you want to deactivate license), reinstall client. Uninstall content, reinstall content. Uninstall scenery, reinstall scenery. I assume you did that, but just in case you did not I thought I'd mention it. I'm not sure what the results would be if one simply installed client, content, scenery without uninstalling first. It might work fine, if so, good for you. I am simply pointing out their "recommended" procedure. Rhett 7800X3D ♣ 96 GB G.Skill Flare ♣ Gigabyte 4090 ♣ Crucial P5 Plus 2TB
May 23, 20197 yr 2 hours ago, simbol said: https://docs.microsoft.com/en-us/dotnet/framework/wpf/graphics-multimedia/graphics-rendering-registry-settings You can find the information in the link above. We still don't know your hardware and settings used for P3D. Regards Simbol Thanks for all your help in these forums! I have updated to v4.5 (Client only), deleted and rebuilt shaders etc. and I am more than happy with the results. Just a curious question though, I checked my registry for the this entry: HKEY_CURRENT_USER\SOFTWARE\Microsoft\Avalon.Graphics\DisableHWAcceleration It does not exist in my registry, Do I need to add it? Regards, Tom i913900KF (5.8GHz) | Case: Fractal PopAir RGB I Gigabyte Z790 UD AX| MSI Gaming RTX 4070Ti Super 16GB | Kingston Fury Beast 64GB DDR5 5200Mhz | SOLIDIGM P41 Plus 2TB NVMe M.2 SSD | Samsung SSD 870 EVO 2TB | Thermalright Frozen Notte 240 MM Liquid Cooling | LG EVO 42" Monitor 3840 x 2160 120Hz | Honeycomb Alpha & Bravo | Logitech G Pro pedals | Tobii EyeTracker | 850W Thermaltake 80+ GOLD |
May 23, 20197 yr 8 hours ago, Nyxx said: I did a painstaking full, fresh install of 4.5 Ha, Dave, I have been resistant to install 4.5 and I'm staying on 4.4 like you did. But I can see you have finally jumped over. Do you personally think it is WORTH it? Have you noticed advantages of being on 4.5 yet? I fly FSL A320 only at present, if that matters, and 4.4 works fine for me, so I am really curious about your impressions. Edited May 23, 20197 yr by Rafal
May 23, 20197 yr 5 minutes ago, Rafal said: Ha, Dave, I have been resistant to install 4.5 and I'm staying on 4.4 like you did. But I can see you have finally jumped over. Do you personally think it is WORTH it? Have you noticed advantages of being on 4.5 yet? I fly FSL A320 only at present, if that matters, and 4.4 works fine for me, so I am really curious about your impressions. Not done a flight yet Rafal. I did notice how stable FSL was in FPS just stayed within 2-3 fps (49-52) in a static test normally that would be 41-51 when not moving. Can I see anything else? No. I was sort of made into a new install. I don't think there is a good reason to FPS are the same. The only reason I could give is everything is updated to 4.5 so everything has changed and we will never know what effect they might or might not have on older versions. David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
May 23, 20197 yr 41 minutes ago, TomCYYZ said: Thanks for all your help in these forums! I have updated to v4.5 (Client only), deleted and rebuilt shaders etc. and I am more than happy with the results. Just a curious question though, I checked my registry for the this entry: HKEY_CURRENT_USER\SOFTWARE\Microsoft\Avalon.Graphics\DisableHWAcceleration It does not exist in my registry, Do I need to add it? No!! If it's not there, good. If it IS there, it should be set to 0. Regards Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
May 23, 20197 yr Moderator @Rafal, I was hesitant to update but finally did it yesterday. No change in fps but loading for a chosen scenario is 20% quicker. Full info here... https://www.avsim.com/forums/topic/554407-45-hot-fix-is-out/?do=findComment&comment=4010462 Ray (Cheshire, England). System: P3D v5.3HF2, Intel i9-13900K, MSI 4090 GAMING X TRIO 24G, Crucial T700 4Tb M.2 SSD, Asus ROG Maximus Z790 Hero, 32Gb Corsair Vengeance DDR5 6000Mhz RAM, Win 11 Pro 64-bit, BenQ PD3200U 32” UHD monitor, Fulcrum One yoke, Fulcrum Throttle Quadrant. Cheadle Hulme Weather website.
May 23, 20197 yr Commercial Member 1 hour ago, TomCYYZ said: Thanks for all your help in these forums! I have updated to v4.5 (Client only), deleted and rebuilt shaders etc. and I am more than happy with the results. Just a curious question though, I checked my registry for the this entry: HKEY_CURRENT_USER\SOFTWARE\Microsoft\Avalon.Graphics\DisableHWAcceleration It does not exist in my registry, Do I need to add it? Regards, Tom No you don't, if it was present the you would have to remove it. Regards Simbol Oficial Website: https://www.FSReborn.com Discord Channel: https://discord.gg/XC82TqvKQ3
May 23, 20197 yr Author 15 hours ago, simbol said: Something is odd in your environment, verify if you have disabled hardware acceleration via registry key. If you have it disabled, then enable it again, this is necessary for 4.5.12 to work at high performance. And for the record we need more information to understand why you are having problems, which includes your full system specs, etc. Regards Simbol Hi Simbol, thanks for the reply. i did check the REG KEY for the exceleration entry, it is not there. from your instructions on a previous thread i thought that this was the desired setup. how would i go about entering this into my REGKEY? David Myers
May 23, 20197 yr Author 15 hours ago, simbol said: ....And for the record we need more information to understand why you are having problems, which includes your full system specs, etc. Regards Simbol Jetline 4676 Intel Core i7-6700K CPU 4.00GHz RAM 16.0 GB GeForce GTX 1070 David Myers
May 24, 20197 yr 23 hours ago, GSalden said: Start with what Nyxx wrote. If you see blurries when flying you might try FFTF Dynamic : Use AGL 0 ft = 0.01 5000 ft = 0.25 hello like that ? what does the below need to be set too ?? 5000 8300 0.01 025 many thanks
Archived
This topic is now archived and is closed to further replies.