TomCYYZ

No issues with OC3 or Forums for me at this time.

I find if I have any app interface (Including AutoFPS) open on top of MSFS2024 my FPS (I have Fixed target = 60) is cut in half with FG Inactive. When I open the interface I immediately observe FPS (Sim Value) and it temporarily shows 60 (FG Active) and quickly turns to "Orange" 30. So, I would conclude that my AutoFPS is functioning as it should. I thought this was a a known issue regarding the MSFS focus. I am using v0.5.1.0.

I may be wrong, but I guess it would be OK to move the file manually from the Community 2024 folder as well. That's what I did. But next time I'll follow your suggestion. Thanks.

I agree, I routinely check FSDT Installer at least once a week, could care less if I miss an update. They sometimes seem push at least 2 a week anyway. I wouldn't notice any functionality changes in GSX. It just automatically runs and does it's thing.

I gotcha, sorry, I needlessly conflated the issue. I have been using 150 x 2 EXTRA and my TLOD Top Max is 300. Thanks again.

Obviously, with my little knowledge and true understanding of this essential app I noticed in the above example that the TLOD Base MIn of 50 x the EXTRA (x2) = 100. TLOD Top Max is 200. I thought it had to equal TLOD Top Max? Just a bit confused, following the previous version instructions 😉

Thanks for the fast reply! I will try running FPS Cap with your suggestions. With regard to the FPS decrease I did a little googling and was wondering if this could be a contributing factor as well: Frame Generation Inactivity: When MSFS loses "true" window focus (e.g., when interacting with menu overlays or using an external application), MSFS Frame Generation (FG) often shuts down, reducing FPS by half or more.

Hi, long time user, first time poster. Thanks for this essential very app. I recently upgraded my monitor to an LG 120Hz, 4K. I previously had an ancient Samsung 60Hz. For the App I use the FPS Sensitivity Mode with a Target of 60 (59 with prev. monitor), Checked Extra TLOD Base, TLOD Base of 100 @1000', TLOD Top of 300 @2000', Auto OLOD checked with a OLOD Base of 100 @ 2000', OLOD Top 20 @ 10000' , RTSS external is set at 60 (59 with prev. monitor). MSFS2024 settings are FG on x2, Dynamic Settings at 30. Do I need to have the In-game Dynamic Settings ON? Probably nothing to do with that but I notice the Sim value FPS goes down to around 40 when FG is Not Active, but back up to 60 when FG is Active. Out of curiosity, is this normal? I have never really noticed this until now.

Hey Ron, I just ordered the LG C5 42" OLED Monitor on Sale from Best Buy. I've been researching this monitor and it appears to be well regarded for MSFS2024. I had a 60Hz Samsung (non 4K or HDR) before and did use FG for a smooth, capped 59 FPS (MSI Afterburner). I also have an RTX 4070 Ti Super card. Just wondering about a Frame rate improvement? I guess I will have to perform some trial and error with my settings to find the sweet spot for me. Just depends on my setup I suppose. In any event I know I will see a vast improvement in visuals, can't wait.

If you are happy with your 270FPS, good on you! I have a 60Hz Samsung Monitor and couldn't be more content with my setup. I have MSFS_AutoFPS pegged at 59 (to give me 1 FPS Headroom, that's right 1 FPS headroom 😉)! No complaints here.

Oh I see, I am looking at that now: Previously the values for Head Tracking Sensitivity for Pitch and Yaw were combined, now they are standalone. I assume I would use the same value for both then. Or I could play around with the individual values, maybe it allows for a smoother transition in head movement. ...same with Head Tracking Sensitivity for Position: X, Y, Z whatever that is. Experimenting needed. Not sure what Head Tracking Limit for Position: X, Y, Z is either. Not sure what Camera Boost Ratio is. Maybe some sort of Zoom Factor.

NP Rob, that news regarding SU5 does not sound promising regarding Tobii. Hopefully we are able to navigate around that when the next update arrives.

These settings work for me (Not beta): https://www.dropbox.com/scl/fi/qt0i3rnf3egncbkyfiios/Screenshot-2026-03-29-131741.png?rlkey=obaqeqot5gjzilkc7wp8gppcf&st=nlaj9xkj&dl=0

I disagree, I move my head left & right all the time and the eye tracker follows, maybe I've got a more flexible neck.

Cold & Dark at Gate using FSFO app for added realism. I let the FO prep the aircraft and run through the Pre-Flight Flows and & Tests, flicking all the switches, I setup the FMC or MCDU FP and PERF stuff and readback the FO's checklists. Then GSX Push. I usually give myself about 25 -30 mins for flight setup. I have produced my own checklists and could do this myself, but laziness has got the best of me, thus I use FSFO.

I am an FSHud & Active Sky user. FSHud makes Runway use decisions based on Active Sky weather. At Pre-Flight Prep I get accurate Runway assignment based on the wind Information from Active Sky for both my Departure and Arrival Airports. If the winds (weather info) change en-route FSHud can and will change the Runway assignment at Destination as well. At times on Descent \ Approach if I do not double check my Arrival Runway I have had to scramble to setup for an active Runway change, which I don't mind. I also found this handy little tool https://runway.airportdb.io/ "Which Runway to Choose", You can use 2 providers either "Vatsim" or "Aviation Weather".

I use FSHud with AIG Traffic & Active Sky and yes, it does support Historical Weather. The benefit it provides with AIG is that you do not need to use the AIG Traffic Controller, AIG handles all that perfectly on it's own as well as traffic separation on the ground and in the air. On descent FSHud seems true to Altitude constraints but at times does issue unusual vectoring to final. I usually ignore FSHud and keep to a STAR or vector myself (after all it's just a Sim). FSHud is constantly being updated and improved, I'm happy using it for my purpose though!

Continue to following this thread, it'll be known soon enough.😉

Pete, Thanks for the Heads-up, exciting development! Tom

Pete, I purchased several airports from iniBuilds & Orbx. All I had to do was setup an account on their website and then follow this message in their FAQ, all my former purchases are under my account and I now get updates or a small fee to upgrade to native MSFS2024: Step 1: Register in Our Store Sign up on our website using the same email that you used to purchase the product from another store. Step 2: Submit a Transfer Request Send an email from your registered email address to [email protected] with the subject: “Transfer – Your Name – Airport ICAO” Attach the original purchase confirmation email from the other store. Forwarded emails or screenshots are NOT accepted—only the original email as an attached file. Click here to know how to do that If you have lost the confirmation email, request a new one from the seller. Important: Send a separate request for each airport. Processing Time Transfer requests are approved manually, which may take up to 5 business days. Once the transfer is complete, you will receive a confirmation email.

I assume your are referring to FSFO? (https://flightsimfirstofficer.com/). It did not get enough votes on the last poll for the next Profile. Hopefully it will get more love next time around.

It installs into your Documents folder, at least for me anyway. It automatically runs when you load MSFS. Look for it in your taskbar, click ^ (to show hidden icons).

I'm currently flying out of KDEN, couldn't be happier with how smooth the preflight seup, taxi and T.O. went. The EFB integration with Simbrief and Navigraph was seamless for me. I use RUDDER for taxiing and it seems to hold a straight line quite easily with little Rudder pedal input, T.O. needed a little more input, but that would be normal with a slight crosswind I guess. All in all, a very smooth performance, better than the iFly Max (which I do enjoy very much). I have active sky and for the climb out it was telling me to expect HEAVY Turbulence up to 18,000 and it was a bit of a rocky-bumpy ride so I guess the flight model, held steady and picked up on that quite well. So, far I like it. OH! I also use the great MSFS_AutoFPS and it is holding my target FPS of 57 very well with a Mtn. TLOD of 700 with FG active.

That's why I handle all the credit card payments....🤔Oh wait, she does the monthly budgets off the visa bill..."what's this charge for?"