April 21, 20215 yr Commercial Member Mixture basically has no effect that we can ascertain. Again, mixture, throttle, WEP and superchargers seem to be broken so there's a lot of fakery going on. We are waiting on a fix that will, with luck, at least allow us to code it outside as we did in P3D. Some axis do not work properly. Investigations are ongoing. Please contact oisin at milviz dot com for forum registration information. Please provide proof of purchase if you want support. Also, include the username you wish to have.
April 21, 20215 yr Commercial Member 4 hours ago, Milviz said: Mixture basically has no effect that we can ascertain. Again, mixture, throttle, WEP and superchargers seem to be broken so there's a lot of fakery going on. We are waiting on a fix that will, with luck, at least allow us to code it outside as we did in P3D. Some axis do not work properly. Investigations are ongoing. Pretty much what we are seeing on our P-40 too. Mixture especially is wired in a VERY strange way.
April 21, 20215 yr I love the Corsair. Haven't had a blown up engine yet (but then I do watch gauges), but one thing I would like to see is more realistic slow flight characteristics (and stall). Although I suspect the SDK is the limiting factor here. HOWEVER, one thing that did pique my interest was the mention of something as large, but easier to fly. May I ask for another hint or two @Milviz? 😀
April 21, 20215 yr Commercial Member 54 minutes ago, lupedelupe said: I love the Corsair. Haven't had a blown up engine yet (but then I do watch gauges), but one thing I would like to see is more realistic slow flight characteristics (and stall). Although I suspect the SDK is the limiting factor here. HOWEVER, one thing that did pique my interest was the mention of something as large, but easier to fly. May I ask for another hint or two @Milviz? 😀 BEAVER
April 21, 20215 yr 50 minutes ago, lupedelupe said: one thing that did pique my interest was the mention of something as large, but easier to fly. May I ask for another hint or two @Milviz? 😀 Well the rumor mill speaks of a 2700 hp Wright Cyclone with a 4.11m diameter propeller, 15.25 m foldable wings, 4.8m in height beast cruising st 200 mph. Dominique Simming since 1981 - [email protected] GHz with 16 GB of RAM and a 1080 with 8 GB VRAM running a 27" @ 2560*1440 - Windows 10 - Warthog HOTAS - MFG pedals - MSFS Standard version with Steam
April 21, 20215 yr Commercial Member The Beaver is for sure in the pipeline and we're... uh... beavering along... that's not the one.... I think Dominique is speaking of the Skyraider and that one is for sure as well... but not yet. a hint... mmmmm.... alright... one word, two syllables, first syllable: I would go to ___ and back for you.... If that's not enough for ya... oh well. We're talking to Asobo about the mixture and, if other devs do so as well... who knows, maybe we can get them to move faster... Please contact oisin at milviz dot com for forum registration information. Please provide proof of purchase if you want support. Also, include the username you wish to have.
April 21, 20215 yr 8 hours ago, kaha said: I was trying to set up a button for centering rudder and aileron (trim). Does't work. Or is this an MSFS flaw? Karl Rudder reset to 0 works I have it set, Aileron I have not found a way. But the Rudder reset works well. But Aileron you dont want to reset to 0 as you always need 5 right. Edited April 21, 20215 yr by Nyxx David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
April 21, 20215 yr There is a Rudder+Aileron reset you might try. Karl i9-9900K@5,0 | 32GB 3200 | 2080TI | 4K 55" | MSFS | P3D V5
April 21, 20215 yr Not sure if this has been mentioned in this thread already but any chance the update would allow the option to remove that magnifying gunsight glass. Thx
April 21, 20215 yr Commercial Member it's doesn't magnify... it's refraction... and yes. it will be removable. Please contact oisin at milviz dot com for forum registration information. Please provide proof of purchase if you want support. Also, include the username you wish to have.
April 21, 20215 yr 18 minutes ago, kaha said: There is a Rudder+Aileron reset you might try. Karl Like I said Reset rudder is needed and works. You dont want to reset Aileron to 0 as you always need 5 right for the FG to fly level. David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
April 21, 20215 yr 17 minutes ago, Milviz said: it's doesn't magnify... it's refraction... and yes. it will be removable. That's great to hear. On a different topic which also may have been addressed already but is it actually possible to drop the fuel tanks while in flight. I use the switches as per the manual but they don't release, is that a limitation of the sim atm and we can only remove them by adjusting the fuel using the menu or am I missing something. Ta
April 21, 20215 yr Commercial Member Jettison is possible but it's not well done... they fall up, then forward then down and back... so... something awry there. For now, it's a no. We're looking at this though. Please contact oisin at milviz dot com for forum registration information. Please provide proof of purchase if you want support. Also, include the username you wish to have.
April 21, 20215 yr Just tried again. There are "Center Aileron", "Center Rudder" and "Center Ailer Rudder". None works for me; https://www.dropbox.com/s/9fmjfdqgmhyy7vk/Center Rudder.jpg?dl=0 I made a lua script in FSUIPC that can trim and center all three surfaces, that works. The Rudder sometimes trims to the opposite direction. This does not happen always: https://vimeo.com/539558863 Karl i9-9900K@5,0 | 32GB 3200 | 2080TI | 4K 55" | MSFS | P3D V5
April 21, 20215 yr 4 minutes ago, kaha said: Just tried again. There are "Center Aileron", "Center Rudder" and "Center Ailer Rudder". None works for me; ht The command is "Reset Rudder Trim" Dominique Simming since 1981 - [email protected] GHz with 16 GB of RAM and a 1080 with 8 GB VRAM running a 27" @ 2560*1440 - Windows 10 - Warthog HOTAS - MFG pedals - MSFS Standard version with Steam
Archived
This topic is now archived and is closed to further replies.