June 11, 20214 yr I am in shock, were i could run v5.1hf Orbx netherlands etc at an easy 50 FPS !!!!!!! ( no vc) I am now struggeling to run at 30. Very dissapointed. Have tried: Other nvidia drivers Reinstall Other MB drivers. Other settings inside p3d It seems like the 10900k (5.2ghz) only runs at one core. Sometimes the other cores are joining in but mostly one core at 100 pct...... RTX 3070 runs at 65 pct. I give up.
June 11, 20214 yr Porked install i bet. First, deleted Shaders, then let prepar3d.cfg rebuild and make your settings new. System: i9 [email protected] - 32 GB RAM - Aorus 1080ti --- Sim/Addons: P3D v5 + ProSim737
June 11, 20214 yr Also review the post on P3D forum: https://www.prepar3d.com/forum/viewtopic.php?f=6312&t=142616 Best Regards, Vaughan Martell PP-ASEL KDTW
June 11, 20214 yr It's not clear to me whether you did a full reinstall of V5. Either way, make sure you delete ShaderHLSL in your main P3D folder then reinstall the client. This has been the main issue for those of us who had severe performance issues.
June 11, 20214 yr 1 hour ago, remcosol said: I am in shock, were i could run v5.1hf Orbx netherlands etc at an easy 50 FPS !!!!!!! ( no vc) I am now struggeling to run at 30. Very dissapointed. Have tried: Other nvidia drivers Reinstall Other MB drivers. Other settings inside p3d It seems like the 10900k (5.2ghz) only runs at one core. Sometimes the other cores are joining in but mostly one core at 100 pct...... RTX 3070 runs at 65 pct. I give up. Ya, you screwed up your install. Numerous topics on people reporting bad performance only to find its on their end. Read around the forum. Eric
June 11, 20214 yr I installed Client - Scenery and Content deleted shader folder completely and Config, runs better than 5.1 and looks better at default no third party shaders but still intend a full install on a new drive later just testing. Raymond Fry.
June 11, 20214 yr I ve made a full install with all my addons recovered After . External view at lfrs airport with pmdg 737. High setings 117fps with cavok weather. First time i have high FPS since a long Time. Frédéric Giraud
June 11, 20214 yr If he is using Envshade, a number of people are reporting problems with it. Gigabyte x670 Aorus Elite AX MB; AMD 7800X3D CPU; Deepcool LT520 AIO Cooler; 64 Gb G.Skill Trident Z5 NEO DDR5 6000; Win11 Pro; P3D V5.4; 1 Samsung 990 2Tb NVMe SSD: 1 Crucial 4Tb MX500 SATA SSD; 1 Samsung 860 1Tb SSD; Gigabyte Aorus Extreme 1080ti 11Gb VRAM; Toshiba 43" LED TV @ 4k; Honeycomb Bravo.
June 11, 20214 yr 29 minutes ago, pgde said: If he is using Envshade, a number of people are reporting problems with it. thanks for the heads up.
June 11, 20214 yr Author Thanks , I’ve been with p3d from the beginning so I know how to update and delete the required folders so I am in the dark about the reason why but I’ll take another look
June 11, 20214 yr ShaderHLSL is different to the normal shaders you delete. Bear that in mind! AMD Ryzen 5900X - Asus Crosshair VI Hero - G.Skill 32GB (2x16GB) 3000 C14 DDR4 @ 3600 14-14-15-14-28-42 AMD Red Devil Radeon 6900XT 2700/2112 1125mv - 3 x Iiyama G-Master GB2888UHSU 4k @ 11560x2160 Saitek X-55 Rhino - Track IR5 - Obutto Sim Cockpit + Triple Monitor Stand - Fancy some Techno? https://www.mixcloud.com/dj_bully/
June 11, 20214 yr 2 minutes ago, djbully said: ShaderHLSL is different to the normal shaders you delete. Bear that in mind! I had similar issues and reverted back to v5.1 except for the v5.2 client. I am sure I only deleted the normal shaders folder and not “shadersHLSL.” This may well have been my issue. Where is the ShadersHLSL folder located? I think I may try updating content and scenery again. Cheers, Pete Pete Solov - Lake in the Hills 3CK and Schaumburg Regional 06CProud AOPA Member - PPL 2001Real World Piper Cherokee Pilot
June 11, 20214 yr Do a clean install. It works fine on my end. How I Evaluate Third Party Sim Addon Developers Refined P3Dv5.0 HF2 Settings Part1 (has MaddogX) and older thread Part 2 (has PMDG 747)
June 11, 20214 yr 3 minutes ago, PilotPete99 said: I had similar issues and reverted back to v5.1 except for the v5.2 client. I am sure I only deleted the normal shaders folder and not “shadersHLSL.” This may well have been my issue. Where is the ShadersHLSL folder located? I think I may try updating content and scenery again. Cheers, Pete Your main P3D directory. Do that step before nuking your P3D install and starting from scratch. Edited June 11, 20214 yr by Chapstick
June 11, 20214 yr 2 minutes ago, Chapstick said: Your main P3D directory. Do that step before nuking your P3D install and starting from scratch. Thanks, I’m gonna add one component at a time. First the content, then I’ll check the performance, and then scenery if that goes well. I assume I don’t have to reinstall the v5.2 client again? Also, delete ShadersHLSL after uninstalling v5.1 content? Cheers, Pete Pete Solov - Lake in the Hills 3CK and Schaumburg Regional 06CProud AOPA Member - PPL 2001Real World Piper Cherokee Pilot
Archived
This topic is now archived and is closed to further replies.