May 10, 20224 yr Is it me or the 737 can't use flights created in the default flight planner? Edited May 10, 20224 yr by Dillon FS2020 Alienware Aurora R11 10th Gen Intel Core i7 10700F - Windows 11 Home 32GB Ram NVIDIA GeForce RTX 4070 Ti Super OC 16GB - Pimax Crystal Light VR
May 10, 20224 yr 4 hours ago, Dillon said: Is it me or the 737 can't use flights created in the default flight planner? No, that’s the 737. either punch all in manually (when very lazy I just input dep and arr airport, then SID and STAR and my plan is ready) or use simbrief to load/import flightplans Phil Leaven i5 10600KF, 32 GB 3200 RAM, ASUS 4070 12GB EVO, Asus ROG Z490-H, 2 WD Black NVME for each Win11 (500GB) and MSFS (1TB), Rolling Cache 16GB, Photogrammetry always OFF, Live Weather and Live Traffic always ON, Res 2560x1440 on 27"
May 10, 20224 yr Or LittleNavMap if you don't fancy Simbrief.... G Gary Davies aka "Gazzareth" Simming since 747 on the Acorn Electron
May 11, 20224 yr 1 hour ago, Gazzareth said: Or LittleNavMap if you don't fancy Simbrief.... G I just bought the 737 and I use LittleNavMap. How do you get the plans from LittleNavMap into the 737 FMS? Thanks! Processor: Intel i9-13900KF 5.8GHz 24-Core, Graphics Processor: Nvidia RTX 4090 24GB GDDR6, System Memory: 64GB High Performance DDR5 SDRAM 5600MHz, Operating System: Windows 11 Home Edition, Motherboard: Gigabyte Z790 Aorus Elite AX, LGA 1700, CPU Cooling: Corsair H100i Elite 240mm Liquid Cooling, RGB and LCD Display, Chassis Fans: Corsair Low Decibel, Addressable RGB Fans, Power Supply: Corsair HX1000i Fully Modular Ultra-Low-Noise Platinum ATX 1000 Watt, Primary Storage: 2TB Samsung Gen 4 NVMe SSD, Secondary Storage: 1TB Samsung Gen 4 NVMe SSD, VR Headset: Meta Quest 2, Primary Display: SONY 4K Bravia 75-inch, 2nd Display: SONY 4K Bravia 43-inch, 3rd Display: Vizio 28-inch, 1920x1080. Controller: Xbox Controller attached to PC via USB.
May 11, 20224 yr Would be great if LNM can export flight plan as well as wind data for the PMDG 737. ASUS ROG Maximus Hero XII ▪︎ Intel i9-10900K ▪︎ NVIDIA RTX 3090 FE ▪︎ 64GB Corsair Vengeance RGB Pro ▪︎ Windows 10 Pro (21H1) ▪︎ Samsung 970 EVO Pro 1TB NVME SSD (OS Drive) ▪︎ Samsung 860 EVO 2TB SATA SSD ▪︎ Seagate 4TB SATA HDD ▪︎ Corsair RMx 850W PSU
May 11, 20224 yr For quick and dirty. Type in the DEP and Appr, then depp/Appr button, The press the dep in the LS1 key and enter the runway, then press the same key then RS2 (for the depart then enter then runway , then the IAF. Voila you have flight plan. Make sure there are no gaps. Edited May 11, 20224 yr by Manny Manny Beta tester for SIMStarter
May 11, 20224 yr 3 hours ago, David Mills said: I just bought the 737 and I use LittleNavMap. How do you get the plans from LittleNavMap into the 737 FMS? Thanks! Use the MultiExport function, just need to set it for PMDG and locate the correct path.... in my case ::::: C:\Users\gary\AppData\Roaming\Microsoft Flight Simulator\Packages\pmdg-aircraft-737\work\Flightplans G Gary Davies aka "Gazzareth" Simming since 747 on the Acorn Electron
May 11, 20224 yr 3 hours ago, Manny said: For quick and dirty. Type in the DEP and Appr, then depp/Appr button, The press the dep in the LS1 key and enter the runway, then press the same key then RS2 (for the depart then enter then runway , then the IAF. Voila you have flight plan. Make sure there are no gaps. Wow, two genius minds. That’s exactly how I sometimes do it as well for quick and usually short hops. your snooty chap 😉 Edited May 11, 20224 yr by DAD Phil Leaven i5 10600KF, 32 GB 3200 RAM, ASUS 4070 12GB EVO, Asus ROG Z490-H, 2 WD Black NVME for each Win11 (500GB) and MSFS (1TB), Rolling Cache 16GB, Photogrammetry always OFF, Live Weather and Live Traffic always ON, Res 2560x1440 on 27"
May 11, 20224 yr If I got a half an hour and no more, I will sometimes throw a departure and an arrival from the same airport into the FMS and fly local. not what the OP is looking for tho. there isn't anything stopping you from manually entering in a default plan into the FMC, and it's not really that hard once you do it a couple times, but simbrief downloaded plans into the fmc is the easiest for now.
May 11, 20224 yr If you use simbrief you can also have wind uploads. David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
May 11, 20224 yr 9 hours ago, DAD said: No, that’s the 737. either punch all in manually (when very lazy I just input dep and arr airport, then SID and STAR and my plan is ready) or use simbrief to load/import flightplans Wow...lazy! 😂 Peter Webber MSFS 2020 & 2024 / Windows 11 / Intel Core Ultra 7 265KF / MSI Pro Z890-S WIFI / Samsung 970 EVO PLUS M.2 500GB / Corsair Vengeance DDR5 48GB 7000MHz / MSI Geforce RTX 4070Ti Super
May 11, 20224 yr 6 hours ago, DAD said: Wow, two genius minds. That’s exactly how I sometimes do it as well for quick and usually short hops. your snooty chap 😉 You thought Since I can't find the Parking brakes, I may not know this eh! 😉 Manny Beta tester for SIMStarter
May 11, 20224 yr If I remember correctly the Simbrief downloader app can be set up to download multiple versions of a plan to different directories at the same time so you can build you plan in SB and and create versions to load on both the MSFS Planning plage and in the 737 FMS.
May 11, 20224 yr you could save the plan from world map, load it into LNM and use the multiexport in LNM to save it as the pmdg format in the correct folder. then call it up in the fmc or whatever needs to be done there. make to set up LNM to use the MSFS databe which is far newer than the default in LNM Or use LNM from the start and skip the worldmap planner. no need however for simbrief or navigraph if you fly not on vastim. Edited May 11, 20224 yr by darshonaut my African sceneries for MSFS : https://darshonaut.blogspot.com/p/msfs-2020.html
May 11, 20224 yr 9 minutes ago, darshonaut said: you could save the plan from world map, load it into LNM and use the multiexport in LNM to save it as the pmdg format in the correct folder. then call it up in the fmc or whatever needs to be done there. make to set up LNM to use the MSFS databe which is far newer than the default in LNM Or use LNM from the start and skip the worldmap planner. no need however for simbrief or navigraph if you fly not on vastim. One advantage of simbrief is it can also create a weather profile that will be used by the FMS to calculate the descent. Edited May 11, 20224 yr by Matchstick
Archived
This topic is now archived and is closed to further replies.