September 21, 20223 yr Wow I am impressed, my old 1070 picked up 25% or more FPS when using DX12 instead of 11. I thought my old system and graphics card would not profit from the new driver. I would from my experience install the new Studio Driver, I did a clean install from the Experience App. I flew back to back tests in 2 different airports with the BN2 and both went from 22-23 FPS to 28-34. Bear in mind I am running 4 monitors using new Multi monitor Experimental settings, and one monitor using AirManager. And I use a Pop-Out for the G530. My system description is in my signature. I still use a 6 year old system built for X-plane. I am just amazed how well it still works now with FS2020. X-plane 12 with similar settings gives me 15-18 FPS using their Multi Monitor settings similar to what I am running in FS2020. And as we all know the graphics just blow XP12 right out of the water. I am not bashing just stating my test results. I was on the BETAs and had no changes at all when launching today. Other than updating NVIDIA driver. Sim on...😀 Com GA Pilot, Retired • FS2020 • FS2024 • Xplane 12 • Current Machine: MSI B760 GAMING PLUS WIFI• Gaming Desktop Motherboard Intel B760 Chipset • Intel Core i7 (14th Gen) i7-14700 3.40 GHz Processor 64GB RAM • 2 / M.2 SSD 1TB • MSI NVIDIA GeForce RTX 4070 Ti SUPER
September 21, 20223 yr People whose GPU were the bottleneck will benefit most from this update. Those with never cards whose CPU is bottlenecking won't benefit so much, according to my impression.
September 21, 20223 yr Yep, and majority of geezers on here seem to have 3090's and so the whining will continue! I have a 3070 and performance is much better, especially with the latest studio driver.
September 21, 20223 yr I have a 1070 too...and I can tell am improvement with DX12...but hard to quantify. Something seems better, but not sure if its exactly FPS.
September 21, 20223 yr 1 hour ago, Freq_flyer44 said: Yep, and majority of geezers on here seem to have 3090's and so the whining will continue! I have a 3070 and performance is much better, especially with the latest studio driver. I have a 3090 and have never whined about performance. I set my expectations and after dialling the sim in for my hardware I had a very nice experience even before SU10 (No I wasn’t trying to run every setting maxed out at 60fps either) Bottom line you have to set the sim up to run the best it can with whatever hardware you have, there is no one setting for all. Richard i7-12700K | Noctua NH-D15S Black Version | MSI Pro Z690 - A | 32 GB DDR4 3600 | Gigabyte Gaming OC 4090 | 1TB WD Blue NMVe (MSFS 2020) | 500 GB WD Black Gen 4 NVMe | 4TB WD Black Conventional | Fractal Design Torrent Case | Seasonic 1000W Gold Plus PSU | Thrustmaster Boeing Yoke | Honeycomb Throttle | Airbus Side Stick | Virpil Rudder Pedals | Sony X90K 55 Inch TV |
September 22, 20223 yr question is... how does one get this 'studio driver' without all its associated bloatware (especially through 'experience') CPU: Core i5-6600K 4 core (3.5GHz) - overclock to 4.3 | RAM: (1066 MHz) 16GB MOBO: ASUS Z170 Pro | GeForce GTX 1070 8GB | MONITOR: 2560 X 1440 2K
September 22, 20223 yr 37 minutes ago, Mike S KPDX said: question is... how does one get this 'studio driver' without all its associated bloatware (especially through 'experience') try here You will want the 517.40 Studio WHQL driver. You do have the option of not installing geforce experience. Intel(R) Core(TM) i7-10700F CPU @ 2.90GHz (8 cores) Hyper on, Evga RTX 3060 12 Gig, 32 GB ram, Windows 11, P3D v6, and MSFS 2020 and a couple of SSD's
September 22, 20223 yr 3 hours ago, Mike S KPDX said: question is... how does one get this 'studio driver' without all its associated bloatware (especially through 'experience') Just wait for the Game Ready driver. I am using DX 11 until the Game Ready driver is released by NVidia. i5-12400, RTX 3060 Ti, 32 GB RAM
September 22, 20223 yr 1 minute ago, abrams_tank said: Just wait for the Game Ready driver. I am using DX 11 until the Game Ready driver is released by NVidia. I doubt very much that the next game ready driver will contain any MSFS-specific code that is not already contained in the new studio driver. I always use studio drivers in flight simulation, and have since P3D 4.0 - studio drivers are more stable, more thoroughly tested, and more bug free. Jim BarrettLicensed Airframe & Powerplant Mechanic, Avionics, Electrical & Air Data Systems Specialist. Qualified on: Falcon 900, CRJ-200, Dornier 328-100, Hawker 850XP and 1000, Lear 35, 45, 55 and 60, Gulfstream IV and 550, Embraer 135, Beech Premiere and 400A, MD-80.
September 22, 20223 yr 8 minutes ago, JRBarrett said: I doubt very much that the next game ready driver will contain any MSFS-specific code that is not already contained in the new studio driver. I always use studio drivers in flight simulation, and have since P3D 4.0 - studio drivers are more stable, more thoroughly tested, and more bug free. The next Game Ready driver from NVidia should contain the fix for DX 12 image corruption that the new Studio driver contains (the image below is from the notes from the latest Studio driver): i5-12400, RTX 3060 Ti, 32 GB RAM
September 22, 20223 yr None of us here are old geezers. All of us are young studs and gals. (My nose seems to be growing). 5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.
September 22, 20223 yr 15 minutes ago, Fielder said: None of us here are old geezers. All of us are young studs and gals. (My nose seems to be growing). I really want to believe that 😉 (and I still know how my FS sounded under DOS) MS FS 2020/2024 | 9800X3D | 64GB DDR5 6000mhz | ASUS ROG ASTRAL RTX 5090 32GB GDDR7 OC EDITION | Varjo Aero | Navigraph | VATSIM | TPR Pedals | Virpil | Honeycomb | Winwing FCU + EFIS | Behringer X Touch Mini | SPAD.next
September 22, 20223 yr DOS? Is that something Bubble Hockey can be played on? I want to know before the Canadian World Update. 5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.
September 22, 20223 yr 12 hours ago, jimcarrel said: try here You will want the 517.40 Studio WHQL driver. You do have the option of not installing geforce experience. Thanks... I actually found this and it seems to work great on the repackaging. NVSlimmer CPU: Core i5-6600K 4 core (3.5GHz) - overclock to 4.3 | RAM: (1066 MHz) 16GB MOBO: ASUS Z170 Pro | GeForce GTX 1070 8GB | MONITOR: 2560 X 1440 2K
September 22, 20223 yr The new studio driver is working well for me in DX12. I will update to the game ready one when it is released. DX12 is smooth here for the first time ever though I am CPU limited atm Ryzen 5800X3D, Nvidia RTX5080 - 32 Gig DDR4 RAM, 1TB & 2 TB NVME drives - Windows 11 64 bit MSFS 2024 Premium Deluxe Edition Resolution 2560 x 1440 (32 inch curved monitor)
.thumb.jpeg.6bc28b3d4de17789a1f1ab26efad0812.jpeg)
Archived
This topic is now archived and is closed to further replies.