February 1, 20251 yr 2 hours ago, Cpt_Piett said: The DLSS files got uploaded to TechPowerUp yesterday. and even more confuzius: their version is hopelessly outdated, jurassic in IT terms. their version is: nvngx_dlss_310.2.zip my DLSS version is: 310.2.1.0 AMD 7800X3D, Windows 11, Gigabyte X670 AORUS Elite AX Motherboard, 64GB DDR5 G.SKILL Trident Z5 NEO RGB (AMD Expo), RTX 4090, Samsung 980 PRO M.2 NVMe SSD 2 TB PCIe 4.0, Samsung 980 PRO M.2 NVMe SSD 1 TB PCIe 4.0, 4K resolution 50" TV @60Hz, VR: Pimax Crystal Light + HP Reverb G2 @ 90 Hz, Honeycomb Bravo Throttle Quadrant, be quiet 1000W PSU, Noctua NH-U12S chromax.black air cooler. 60-130 fps. no CPU overclocking. very nice.
February 1, 20251 yr 2 minutes ago, B777ER said: What is the general consensus with DLSS v4 setting, Quality, DLAA, Balanced or one of the Performance ones? I am using Quality right now. When it was ok I liked Auto worked best for me - all subjective - I am on new 48" OLED Samsung - will be different for different monitors Rich Sennett
February 1, 20251 yr 4 minutes ago, Rob G said: Hi folks. I know that the DLSS information display on the bottom of the screen comes from the registry change I made. But where does that display at the top come from? How do I remove it? Thanks once again ....... I noticed that to guess it has to be there - if you know its working just delete that reg entry and get rid of it Rich Sennett
February 1, 20251 yr 10 minutes ago, Richard Sennett said: Nope its a no go for me to blurry and laggy panning screen tear and shimmering - its gotten worse instead of better It is a lot more blurry and opaque, and there’s also lots shimmering when moving in the cockpit.
February 1, 20251 yr Going DDU this new driver now and go back to 566.36 now see if that helps also with sim not shutting down also Rich Sennett
February 1, 20251 yr 24 minutes ago, B777ER said: What is the general consensus with DLSS v4 setting, Quality, DLAA, Balanced or one of the Performance ones? I am using Quality right now. DLAA is no downscaling. Use the one that works best without a performance loss. 7950X3D | RTX 4090 | 64GB DDR5
February 1, 20251 yr 22 minutes ago, turbomax said: my DLSS version is: 310.2.1.0 Hey, where did you get that shiny new version? 😋 7950X3D | RTX 4090 | 64GB DDR5
February 1, 20251 yr 2 hours ago, Cpt_Piett said: Are you using the latest inspector without customsettingnames.xml? I use this, is yours the same? AMD 7800X3D, Windows 11, Gigabyte X670 AORUS Elite AX Motherboard, 64GB DDR5 G.SKILL Trident Z5 NEO RGB (AMD Expo), RTX 4090, Samsung 980 PRO M.2 NVMe SSD 2 TB PCIe 4.0, Samsung 980 PRO M.2 NVMe SSD 1 TB PCIe 4.0, 4K resolution 50" TV @60Hz, VR: Pimax Crystal Light + HP Reverb G2 @ 90 Hz, Honeycomb Bravo Throttle Quadrant, be quiet 1000W PSU, Noctua NH-U12S chromax.black air cooler. 60-130 fps. no CPU overclocking. very nice.
February 1, 20251 yr 28 minutes ago, Rob G said: Hi folks. I know that the DLSS information display on the bottom of the screen comes from the registry change I made. But where does that display at the top come from? How do I remove it? Thanks once again ....... Try this https://easyupload.io/m/n2drlz 7950X3D | RTX 4090 | 64GB DDR5
February 1, 20251 yr 15 minutes ago, Cpt_Piett said: DLAA is no downscaling. Use the one that works best without a performance loss. What does Quality do? Eric
February 1, 20251 yr 15 minutes ago, turbomax said: I use this, is yours the same? Yes 7950X3D | RTX 4090 | 64GB DDR5
February 1, 20251 yr 5 minutes ago, B777ER said: What does Quality do? It downscales to a lower render resolution. Then DLSS uses some AI-tech to upscale so that the image appears to be at a higher resolution. Not sure if I explained that very well... Note: ultra quality is no longer available. 7950X3D | RTX 4090 | 64GB DDR5
February 1, 20251 yr 1 minute ago, Cpt_Piett said: It downscales to a lower render resolution. Then DLSS uses some AI-tech to upscale so that the image appears to be at a higher resolution. Not sure if I explained that very well... Note: ultra quality is no longer available. Thanks for this, perfect! I'm going to bookmark this one. Eric
February 1, 20251 yr The blurriness is a dealbreaker for me, so no more DLSS. Went back to TAA and it does have a performance improvement. But maybe it is also a better optimization of SU1 Beta 2....I am happy flying this version of MSFS 2024. Ramon De Valencia AMD 9950X3D / 64GB DDR5 6000MHz / RTX 5090 / 1200 watt PSU MSFS 2020 and 2024
February 1, 20251 yr When you have the correct driver, then make sure you that driver is using the preset that you want it to use. The text at the bottom of every msfs window can be made to list the driver and list the preset. I use two one click .reg files to turn that text on and off. But it can be done with a regedit manually. You only need to do it once as your final check. 5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.
Create an account or sign in to comment