tjrush

I think I got it under control. Man, does the trim move slowly. Is there any setting to speed it up?

How do you set the trim? Nothing I do changes the position of the little green arrows on the trim indicator.

MS2020 -> If I were interested in a PC-12, What would you recommend?

Thank you. Auto rudder was turned off,

Anyone with any ideas?

When starting MSFS, an update occurred which also caused all my settings to be reset. I have managed to restore all previous settings except alerions and elevator. I have a Saitek yoke. When I go to the Control settings, everything seems to be set correctly. When I turn the yoke left and right the white line under alerions moves back and forth. Same is true of the elevator. When I push/pull the yoke, the white line under Elevator moves back and forth. My problem is that none of this works in the actual aircraft. I've tried both the DA62 and TBM930. Neither aircraft responds to my turning the yoke. The animations work but the aircraft does not move. Will someone please point me to what I'm missing?

As long as Sayintentions is $30 a month, I don't believe it will survive.

Have you tried LittleNavmap? It's free. If you don't like it, no harm is done.

The accuseason product page shows a comparison of the three tree sizes.

The problem was the Windows hidden window trick. It appears to be OK now.

Dave, Just downloaded and installed version 2.0.1.8 Install seemed to go normally. However when starting P2A I get to "Loading Pilot2ATC Main Screen - Please Wait" . . . Still Waiting Any suggestions? FSX Gold, Win 10 (64)

Mike I'd be very careful about purchasing VoxATC. It's been well over a year since it has been updated and the developer is numbered among the missing. I fear that VoxATC is abandonware.

Anything. If I right click the pilot responds just as if I pressed the Say It button. For example, if I click in an empty space the pilot responds and I get the normal FSX dialog box.

When I right click, P2A repeats last pilot response. Both SayIt Hot key and Sayit Joystick button show as disabled and the enable box is unchecked.

Assuming that you are using a USB headset, this is done through FSX. I have the USB headset as the default sound device. Under sound settings in FSX send sounds to the speakers and voice to the default.

OK one more try before I give up. I am ready to go at Sacramento Executive (KSAC). What is my first contact to get P2A started?

I'm not looking for real world procedures. I want to know how to get P2A working.

I repeat. . . What is the procedure for getting things going at an uncontrolled airport? What frequency do you enter and what do you say to get P2A started?

What is the procedure for getting things going at an uncontrolled airport? What frequency do you enter and what do you say to get P2A started?

Yes I have 2.1.1.3. The actual flight plan was KFCM ONL V100 BFF KTOR The plan filed included all the waypoints on V100 between ONL and BFF

I created a flight plan from KFCM to KTOR. The first waypoint in the plan was ONL. ONL Is the end point of a SID. The flight plan validates but when filed it produces an Unhandled Exception error. I then added added two waypoints between KFCM and ONL and the plan filed successfully. Is there a limit to the distance between waypoints? ONL is 267 miles from KFCM.

Dave, Win 10 64 Saitek Pro Flight Yoke P2A Config - P2A Setup - Joystick PTT Button Saitek Pro Flight Yoke Button 0 P2A Config - Speech Tab - Joystick Sayit Button No joystick is entered. Button Number Disabled. The enabled box is unchecked. The Joystick Sayit button number changes to the number of whatever button I press on my joystick. I start at disabled. However, when I presss the PTT button it changes to 0. If I now lower my flaps, it changes to 19. Prees PTT and it goes back to 0. So, the first time I press PTT everything is fine. If I press PTT again the P2A Pilot immediately responds. The Sayit function appears to work even though the enabled box is unchecked.

The Sayit hotkey and the Sayit Joystick button are both disabled.

I am using the trial and am having a problem that the P2A is repeating what I say. Sometimes with a small change, sometimes exactly the same reply. I would be happy if the P2A pilot never spoke and only the various controllers commands were spoken and printed in the text box. If my words are recognized they would also be printed. Can this be accomplished and what settings are needed?

I believe that some people got it working by creating the database in Windows Safe Mode.