waleed

John, that is it, thanks. Farlis, great to know, but sadly the option is "greyed out", and I cannot get it to work. I have more than enough space on C drive, but have a dedicated one each for P3D, and MSFS, and so would prefer to have it on D drive. The core can stay on C, but the rest I would prefer to relocate to D. I will move the Community and Official folders over and edit config file for now. I now know where to look for my next uninstall reinstall process. Thank you all for your help and advice.

So I need to install it on a dedicated (D) drive (Microsoft Store version). I have to create a folder (MSFS) for it to install into on the D drive, but then the update goes to C/User/User........... Should I leave it be, or move the update somehow (?) to my D folder? Thanks for any insight in advance.

Anyone able to install said scenery into V5.3? It installs, but when I run it scenery 137(?) is missing. Any help would be appreciated

So I bought a srtreamdeck mk2 to use as an "easy" way to jump between views in chaseplane in P3D v4+. I need guidance to simply use it as buttons for assigning views. Simply put, please help, and thanks in advance.

11700KF, RTX 3070ti, 32GB ram

Specs are at the bottom of his post in black and green.

Eric, if you use Chaseplane it should do the trick. In Cinematics, I have it set at changing camera angle every 30 seconds so the view is never the same. I leave it in cockpit view for ten minutes, then after that it changes the view as I mentioned. Beautiful screen, but sadly has the most frightening side effect. Sadly that is all I have for you. Good Luck.

Thanks Mark. Not worried about who seems me so long as I can fly the airline itself. I just assumed that I had to belong to a VA to be able to do these events. Great to see that I can do so as a loner. Will look for more events for the future.

So I have been (3-4 years) considering flying on Vatsim network, and got excited with the Cross the Land Westwards event coming up. Low and behold they had OJAI to LOWW, and I figured I would do an RJA 147 flight online as I do at least two weekly flights on the route offline. Sadly, no RJA (Royal Jordanian Airlines) exists in the Airlines Listings, but it seems there are a few flights with the RJA code. https://ctl.vatsim.me/ctl227-cross-the-land-westbound-2022/bookings I am confused because of the fact that this is the case. Am I able to do a flight in an event or online without belonging to an VA? All flights I am interested in are booked so no worries for this event, but I am asking for future reference as I do indeed need to find a VA to settle into. Thanks in advance for any feedback.

So I have an LG 55" as my main monitor, and am using a second connection for my MCDU from Skalarki. Main Monitor is #2, and MCDU (small screen) is monitor 1, and I also did the extend the displays as required. All works fine with the software when flying so no worries there. Mayhem shows up as follows: I connect power when I intend to use the second "tiny" screen, and turn it off when I am done. Some or most (depending on w11's mood?) of my files and shortcuts go to the small screen, and I have to "coerce" them back onto my main display even (harder) when second monitor is off, and on some occasions P3D starts up normal, only to find it load the sim in the small screen. The only way to deal with this currently is to unplug the HDMI adapter from the MCDU unit so everything goes back to "normal". Powering off does not really change the mess I have. I have no idea what to do and have exhausted all my abilities to keep everything on the main monitor. Any help would be highly appreciated. Thanks in advance.

Passed by one two days ago when I went to get my daughter from her friends house. Looked lonely and forgotten sadly.

So, to those of you who have one, what settings would I look at (LG, and Nvidia ?) to get the best performance?. 9900K, 2080TI, 32gb ram, and currently on HDMI 4 on the TV. Also, anyone notice edges curved away from where you sit, or is it something with the settings, or my eyes? Currently running at 4096 x 2160 with size of text at 175%. Recommended is 3840 x 2160, but at that setting the sides are "blacked out". Should I try the insane search for a 3080ti, or better yet 3090, or 3090ti when it comes out? I figured I will start a new build with the 4090, and 12900k? when they come out. Thanks for any insight, and oh yes anyone know of a good neck brace lol.

hehehehehe

Thanks Bob, that is probably the issue. However, sadly I went ahead and removed all the aircraft and scenery and am starting over. I will copy your info on the files for (God Forbid) the future messes I create. I guess it is for the best as I will thin down the amount of add-ons (Too many) and hopefully not have to wait forever for the sim to load everyday. This is for the record the one part that keeps me happy. The willingness of people to help out. Thanks .

Not sure what I did, but I guess its a clean reinstall for me. One too many things went wrong, and I guess a clean install would be best. Its is not so bad, as it gives me the chance to use MSFS more.

Thanks Ray, but I was referring to the rest of my scenery and not FSDT scenery. I even "lost" my FSLabs aircraft as they do not show up when I go to choose an aircraft while the others like PMDG are there with no issues.

So, I must have messed something up when I uninstalled my FS Dreamteam products as I wanted to move them to another drive. My sim works fine, except none of my other scenery shows up. I am back to a magical speedy start when I launch P3D (v4+) which is not a good sign. Funny thing is they are there in the add-on folder, and in the sim when I look up the scenery. Except they are invisible when I fly, and this includes my FSLabs aircraft. Any insight or advice is truly appreciated, as I do not look forward to reinstalling 500GB+ and P3D again. Thanks in advance for any insight.

Thanks Ray, I may yet pull this one off. As far as Honeycomb Throttle Quadrant, Thrust master Quadrant, too late for them as they will have to be delivered to Jordan when they are released. One thing I noticed on the monitor is it is NVIDIA G-Sync® Compatible, whereas the older one says simply G-Sync. Hopefully not a big difference there.

Actually my intended destination is Jordan, so the savings are real, and sadly the taxes are much higher than in the UK when it comes to electronics. As crazy as it may sound, the formula works best this way, as I mentioned earlier that I am allowed a one time tax free shipment of household goods, including electronics.

Ray, thanks for the advice. For the record, I hung up with Overclockers Uk about 15 minutes ago. I will need to order it on the phone direct as it is shipping overseas. I am waiting for a more certain availability date from them so I can make sure it gets here before I leave so hopefully it all works out. As far as discount is concerned, it will be tax free, so the shipping only raises the price by a hundred pounds, which is still about two hundred less than the older version her in Dubai which is/ and has been expected in 13 days for a month or so now.

Thanks for the advice Ray. Firstly the sockets in the new place will take the three plug fine so no worries. The problem is that the country I am going to has a horrendous tax on electronics, and as I am moving I get one tax free shipment of home furniture and electronics. I am anxious to get it before we leave, which is now unknown lol, as the concerned government is not up front with reopening the airport so I may have gotten enough time to order the original with a twist. https://www.currys.co.uk/gbuk/computing/pc-monitors/pc-monitors/lg-ultragear-38gn950-b-quad-hd-38-curved-nano-ips-lcd-gaming-monitor-black-10205235-pdt.html I am checking to see if they ship to Dubai, as the supplier in Dubai does not have a delivery date n the old one, let alone this newer version. Plus, as it is going overseas it means I do not pay taxes (200 or so) and that may cover the shipping cost. What do you think of this one Ray?

I was looking at an LG 38 inch (LG 38GL950G) to replace my 10 year old LG E2750, but the one I want is not likely to arrive in time before I move countries. I would like advice on a good 34 inch monitor instead as those are readily available. I will use it for Simming, and for some gaming (nowhere near pro status lol). I have a 9900k and a 2080ti, so higher end should be fine. Some monitors I am looking at: 1-34 "LCD Acer Predator X34P - IPS, QHD, 4ms, 120Hz, 300cd/m2, 100M: 1,21: 9, HDMI, DP, USB, speaker, pivot, G-Sync 2-MSI Optix MPG341CQR 34 "C/3440x1440/3000: 1/2ms/144H 3- "WLED ASUS PG349Q ROG 4-LG 34GL750 - QHD, IPS, 2xHDMI, DP 5-LG 34GN850-B 34 Thanks in advance for any and all insight.

Perfect gentlemen, thanks for the help.

I have my own assignments, which include deleting almost all and reassigning my own for my throttles, side stick, and rudders. They are deleted sometimes when I install new software, and it is a headache to say the least, so I was hoping someone would guide me as to how to save the assignments for the next time I install something that deletes them. Thanks in advance for any insight.

https://milviz.com/flight/products/KA350/index.php Look in Downloads on the product page for manual. Also, if you are registered on the site look under KA 350 general forum for King Air 350i Manuals. Halfway down the page you will get a lot more manuals. Good Luck