-
Content Count
358 -
Donations
$0.00 -
Joined
-
Last visited
Content Type
Profiles
Forums
AVSIM
Media Demo
Downloads
Gallery
Blogs
Forms
Everything posted by andy1975
-
Panel Display Corrupts in Cessna 182-RG
andy1975 replied to Flaps30's topic in Carenado General Forum
Hi Flaps30! ....My driver is version 8.17.127533... Here you are ... Dirver version 275.33 inside the vendor´s driver package. I would try out the original nvidia 270.61 report as rock solid on many other FSX communities or the driver of your graphic cards vendor and look in their driver archive... then it should be gone.It also didn´t happen too often on my side but I got crazy when that happened, especially with some more performance demanding aircrafts like the Cessna Mustang or Citation X 2.0 or when running higher demanding scenery addons. -
Panel Display Corrupts in Cessna 182-RG
andy1975 replied to Flaps30's topic in Carenado General Forum
Hi Flaps30!I had the same problem in my configuration and it drove me nuts!I don´t know if it is your case but I have a Nvidia graphics card GTX 285 and had the 275.33 drivers installed, now after rolling back to the solid 270.61 I do not have any of these corrupt displays anymore!So I believe it is a driver related probelm. Hope it is your case too! If you have a ATI card, maybe try do roll back to a known good driver too! -
Hi Bert,I found something absolutely weired regarding the performance of the VC: 1.) I turn off MAP mode completely and I have 5 Frames more performance from 20 to 25 frames (you have enough MAPs to display via the GNS 430 ) now here it comes: 2.) After that I turn the ASPEN OFF via the red button upper right and then again ON ... then I have FULL frames without any loss and stutterfree! ( in my case 30 FPS locked again and STAYS there!!!) That is spookey if you ask me!
-
Thanks Bert! The only thing that does not work is the possibility to change the RXP GMA340 and GTX327..... well, they can be changed but the colours do not match with an ugly pronounced whiter grey tone!
-
Hi everyone,I just messed arround a bit with the panels and found that the best solution to have two RXP GNS 430 in the UNLIMITED version is by KEEPING the Carenado standard Cockpit layout and NOT use the RXP Integration tool. Here are my entries in the panel.cfg First section to change: [Window00]Background_color=49,49,49size_mm=500,532window_size_ratio=1.000 position=0visible=0ident=794window_size= 0.320, 0.444window_pos= 0.020, 0.505zorder=0 gauge00=rxpGNS!GNS430, 2,0,500,266gauge01=rxpGNS!GNS430_2, 2,266,500,266gauge02=BA36!Toggle_GPS, 115,38,274,164gauge03=BA36!Toggle_GPS, 114,291,278,164 and second: [Vcockpit03]Background_color=0,0,0size_mm=512,512visible=0pixel_size=1024,1024texture=$Panel_bon_4_N gauge00=rxpGNS!GNS430, 157,59,353,179gauge01=rxpGNS!GNS430_2, 157,239,353,179gauge02=BA36!gem, 8,354,154,154 Well, this is just kind of suggestion for a quick start from, please correct me how to do it easier! And don´t forget to make backups of original files and put in a working RXPGNS.INI setup for two GNS 430! Hope it helps!
-
Mt 337 is missing some parts
andy1975 replied to Tenpin's topic in C337 Skymaster HD SERIES for FSX | P3D
Hi Thedcn!Do you use EZDOK Cam addon? Then you could try to run the EZDOK config tool.I also have seen some strange behaviors in FSX when using the automated webpage FSX configurator by ******* Altuve. Maybe delete the FSX.cfg file and let FSX build up new from scratch with a new start of it ?! -
LIghts and Starting engines
andy1975 replied to klemay's topic in C337 Skymaster HD SERIES for FSX | P3D
Hi Klemay!Sounds very odd to me , maybe try to make a default flight with a stock FSX native plane like the FSX 172 or the Baron?I use myself the FSX stock Baron, make her Cold & dark and I take this plane as a start up for every FSX boot. Never had any similar issues with an addon plane as I do this since FS2002.By doing so you will have no danger to load up some special tweaks by any developers. 1. Maybe try to delete your current default flight and create a new one with a stock FSX 172.2. Also you could try to start up FSX without any Controllers plugged in like yokes, throttles , peddals or Goflight or Saitek stuff, just start FSX clean with just your mouse and see if it will start though ... just to be sure that hardware isn´t causing any problems. Hope it helps! -
Wow!Love that french one! Thank you very much and keep em coming !
-
Reality XP Guages and Go Flight Radio Integration
andy1975 replied to Blaze's topic in C337 Skymaster HD SERIES for FSX | P3D
Hello Blaze,I personally own 8 Goflight devices, My MCP (not PRO!) and my GF166 works great besides of my other Goflight modules with the C337! I can control NAV/COM1/2 , ADF and Transponder in conjunction with a RP48 module. No special assignments were needed, just working as allways.But I have to say that I am using the RXP GNS530 as COM1 / NAV1 device and cannot tell if it is the Carenado Garmin 530 (Nav1/Com1) that causes the problem ?!My current Goflight software isn´t the newest 2.03 it is still 1.95.4 ("never touch a running sytem") , maybe there is a problem too ?! Adding other gauges to a 3D gauges panel isn´t possible, I only managed to exchange my RXP GTX327 and GMA 340 till the C210 release as they were allready fitted with Carenado versions. Hope I could help just a bit! Best regards,Andreas EDDN -
Hi,looks really nice and promissing! But hope the great Carenado performance on their planes will still be the same with starting putting glass-gauges in them! Andreas EDDN
-
Hello kiki!I have a now mid-range PC with Q9550 and a GTX285 on Win7 64bit, nothing overclocked. On my side I have had no framedrop when flying Carenados HD releases! These HD textures are in higher 2048x2048 resolutions inside and outside and yes, you see the difference, just awesome, but with my pc configuration it is no problem yet ... don´t know how Carenado managed that, they just find the eveness in their models all the time! But I understand your concerns and I share it completely, till now I just LOVE the Carenado-planes because my pc can handle ALL planes of them easily and I hope so much that especially the C90 won´t get too much blew up with extras to get a slideshow in the end of Carenado for the very first time! To make a conclusion: all of Carenados HD- and non HD - releases are till now absolutely equal on systemsdemand on my side here ! Hope that helps! Andreas EDDN
-
Hi Bernt ! Thanks for the quick fixes here! She flies just so handy! Best wishes! Andreas EDDN
-
PUUHHH ! Wow that was a thrilling hour for me ! Thank you for the update and thanks Carenado for taking care of a little coward like me .... but heh you just expirienced my clear support and I made a prepay! Best regards, Andreas EDDN
-
Smae here Regards,Andreas
-
Hello Ryan! Wow great choice! would also LOVE to see a repaint of that beauty too! Regards,Andreas EDDN
-
Fuselage chopped off in external view
andy1975 replied to OldFlyboy's topic in CT210M Centurion II HD Series for FSX | P3D
Hello Oldflyboy! I am sorry to hear that it seems to take much longer than imagined! Why not just using EZDOK and create quick your own fixed external views.Well, the initial setting up of EZDOK is kind of horror , but I exported all the effects from the default fsx aircrafts and import them to the other addons, like with the C210 I import all the effects from the default fsx 172 to my custom views, the Bonanzas got the default Mooney - effects on the views and so on... Realy hope you will find a quick solution for the external views, mine is to use EZDOK customs instead of the provided ones. Best regards, Andreas EDDN -
Sandy bridge but no smooth flight: only @ 60 fps
andy1975 replied to PaoloA's topic in MS FSX | FSX-SE Forum
Hello PaoloA, I can recall that when using an external FPS limiter you shold limit only to half the refreshrate of your monitor, so with yours at 60Hz (which is mine too btw.) use the FPS limit at 30 only ... and 30 FPS in FSX is quite a lot and satisfying! Hope that helps! Andreas EDDN -
Hello Carenado, just wanted to give my two cents and tell you that your new preview pics of that wonderull C90 are just delicious! What a nice working place this will be! Really cannot await to to fly her in the end! Thank you very much for keeping us updated of that beauty! Maybe you can provide a german registration livery in the release ? One question: can anyone tell if it will be a C90A or C90B ?!? Best regards and PLEASE keep up that excellent work you do for us enthusiats! Andreas EDDN
-
Hello Ron! maybe try the FSX C206 Sound-Patch provided on the Carenado Homepage under Updates. I had also some Sound problems with my FSX version and this seemed to cure that! Hope that helps! Andreas
-
Hi all,just redownloaded the product and yes the clock seems to be fixed! :-) Didn´t fiddle out more of what has been done yet. Regards, Andreas
-
Fuselage chopped off in external view
andy1975 replied to OldFlyboy's topic in CT210M Centurion II HD Series for FSX | P3D
Hello Neal,don´t know if I am right, but this should be because of the widescreen=true options most of us use in the FSX.cfg and Carenado seems to have adjusted these fixed camera values by NOT using widescreen in FSX for the wide masses of customers out there.In the 210´s Aircraft.cfg (please make a BACKUP before testing!!!) there should be some values " CameraDefinition.XXX ". They are all labled by their name shown in FSX itself in the upper corners. Look for the correct Title-name of the urging camera you wanna tweak (e.g.Title = Rear Seat Right ).Now in the corresponding CameraDefinition.XXX column there should be a value like e.g. "InitialXyz=0.5, 0.0, -1.0" .Now tweak these values to adjust / increase the distance to the model ... I guess it should be the last Z-value you have to make a bit bigger, the value can be positive or negative!After that you can also tweak the value of e.g. "InitialZoom = 1.0" to zoom back on the model (increase the value). As I said before, I did not tweak on this before, but these lines should do it somehow ... so you should try it out and please backup aircraft.cfg before that all to restore back quickly. (for more explanation read here: http://msdn.microsoft.com/en-us/library/cc526984.aspx) Hope this was no wrong advice and it might help you out! Regards, Andreas EDDN -
Roll Rate and Elevator
andy1975 replied to Mustang92's topic in CT210M Centurion II HD Series for FSX | P3D
Hi dear Bernt!count me in this! would be great! Many greetings!Andreas EDDN -
Hi there,look downward to the left knee, left side, must be near the fuses , white switch ... there it should be :( Regards,Andreas EDDN
-
Hi there,same here, seems like the gauge of the RXP530 is kind of "under" the wanted gauge-place in the VC! (just as with the Commander 3rd-party-option)But I managed it by an interim workarround for the RXP530 / RXP430 Integration:Simply install meanwhile the Car530-RXP430 Integration-file, if you want to use both RXP units. Then just exchange all the gauge-lines saying Gps_530_3D_210!gps_500 in the panel.cfg with rxpGNS!GNS530... now it should work fully nicely integrated! Only drawback is that you have to switch it on by the 2D-popup-panel, won´t switch on by GNS-VC-knob so far :( .I also added a valid/working rxpgns.ini to the panel-folder.Hope it helps through the weekend!Fantastic plane and FDE - File so far I can say in 2 hrs of flight, I am totally impressed and THANK YOU for LISTENING Carenado!Happy Landings!Andreas EDDN