PIC007: Do you know how much it was set to BEFORE SP1.Thank you anyway.

I havent installed the SP yet, but I had actually adjusted mine to these settings and it worked great for me...[VIEWS]VIEW_FORWARD_WINDOWS=MAIN_PANEL,MINIPANELVIEW_FORWARD_DIR=5.000, 0.000, 0.000VIEW_FORWARD_ZOOM=0.8

Anyone else know what it was before SP1. (Original)

All those Configs in the "Panel" folder.....you know the ones that have "Panel_wide" , "Panel_4:3" etc.... All the NGX aircraft alias themselves to the 800 panel. Don't know if you know it or not but the "Panel.cfg" is the main file that the NGX uses. If you rename one of those "Panel_wide" or other configurations to just "Panel.cfg" you should see a difference when you load it up.

I havent installed the SP yet, but I had actually adjusted mine to these settings and it worked great for me...[VIEWS]VIEW_FORWARD_WINDOWS=MAIN_PANEL,MINIPANELVIEW_FORWARD_DIR=5.000, 0.000, 0.000VIEW_FORWARD_ZOOM=0.8

Another way to try it, that should also work

Thank you so much Jason. Chris: i tried it but no difference.Any suggestions to which setting is the must realistic will be appreciated (But is is definitely not 10 i guarantee)Just for your information i'll set it to 2.5 (Which is between 5.000 and 1.000) until i know what setting is the must realistic.

HiI don"t know if this part of the new release but after installing the SP1 i have noticed that the loko light does not work.Moshe Epshtain

Captains-As of 0930Z/29OCT11, I replaced the SP1 installer in order to fix a few minor issues that could be addressed with a simple installer rebuild.

HI Robert,Quick question so I do this right. I've never installed any of the hot fixes. I'm still running off the original base package from August. Do you recommend that I uninstall and download the new base package with SP1, or just load SP1 over my current install?Thanks!John

H Robert, I'm having a problem with the HUD. When I pull the combiner down there is nothing. I set the elevation, rwy length and choose the mode and there is nothing on the HUD. I did a complete uninstall, re install base pack then SP1 and no HUD symbology. Thank you for the overall quality of your NG's.Thanks Again,Tristan

H Robert, I'm having a problem with the HUD. When I pull the combiner down there is nothing. I set the elevation, rwy length and choose the mode and there is nothing on the HUD. I did a complete uninstall, re install base pack then SP1 and no HUD symbology. Thank you for the overall quality of your NG's.Thanks Again,Tristan

2 things to check.1: on the pedestal, make sure the CLR button on the HGS panel is not illuminated.2: adjust brightness knob (above & slightly to the right of the combiner) to make sure that isn't it.If neither of those work then it's a problem with your dll.xml file. There are instructions you can search for or you can attach that file to a support ticket explaining the problem.

Robert would appreciate you looking into a problem with the 900 pmdg_737NGX_fuselage_2.dds file not matching the color of dds 1 and 3, thank you so much.

Thanks again!

HI Robert,Quick question so I do this right. I've never installed any of the hot fixes. I'm still running off the original base package from August. Do you recommend that I uninstall and download the new base package with SP1, or just load SP1 over my current install?Thanks!John

It adds up to the same thing really !!Fred.

RobertI did all the installation process like you said but i have been experiencing a problem on the fmc after loading a panel state.But the fmc keep showing this message " loading panel state"

PIC007: Do you know how much it was set to BEFORE SP1.Thank you anyway.

I just did a complete unistall and reinstall. After installing the base 800/900, I made a copy of the panel config. After installing the rest, SP1 and the 600/700, I looked at the saved cfg and made the following changes in the new panel cfg (in the base 800ngx)[VIEWS]VIEW_FORWARD_WINDOWS=MAIN_PANEL,MINIPANELVIEW_FORWARD_DIR=0.000, 0.000, 0.000VIEW_FORWARD_ZOOM=0.8It works great. I was frustrated too because the simple fix in the read me did nothing for the problem.

I just did a complete unistall and reinstall. After installing the base 800/900, I made a copy of the panel config. After installing the rest, SP1 and the 600/700, I looked at the saved cfg and made the following changes in the new panel cfg (in the base 800ngx)[VIEWS]VIEW_FORWARD_WINDOWS=MAIN_PANEL,MINIPANELVIEW_FORWARD_DIR=0.000, 0.000, 0.000VIEW_FORWARD_ZOOM=0.8It works great. I was frustrated too because the simple fix in the read me did nothing for the problem.

for me it is just temporary solution, I am not sure if this is the most exact, wait until official solution from Robert

Well its the settings it had prior to SP1 and I was happy with it then as I am now. I don't claim to be the brightest but this fix worked for me. I am sure there is a way PMDG would prefer.