December 24, 201411 yr My FSX is running with NickN recommended settings using Nvidia Inspector. As I understand DSR is part of the Nvidia Panel. Was told not to meddle with the Nvidia panel if using inspector. Is there any truth to this or can I set DSR as well. Thanks and compliments of the Season to all. Joaquin Blanco Intel Core i9-9900K at 5Ghz, Corsair Hydro H100i RGB PLATINUM CPU cooler, Asus ROG STRIX Z390-E,Motherboard, NVIDIA GeForce RTX 2080 Super 8GB GDDR6, G.Skill Trident Z RGB 32GB DDR4 3200MHz Memory, 500GB Samsung 970 EVO PLUS M.2 PCIe,2TB Samsung 860 QVO Solid State Drive, 2TB, 2 x Samsung 860 Evo 2TB, 1 x 1TB Samsung 860 Evo, Corsair RM650x 80 PLUS Gold 650W PSU.
December 24, 201411 yr My results didn´t show any performance improvement. IMO, images at 2x and 3x DSR are a little bit less crispy then at native resolution. Duran.
December 24, 201411 yr Author why is one half of TBI terminal in the middle of lax? lol that's your question? You should address that at the FSDT Forum. Not sure why the GTX 550 Ti Isn't on there - it seems to have made the cut on previous updates. Does it have the Kepler Technology? My FSX is running with NickN recommended settings using Nvidia Inspector. As I understand DSR is part of the Nvidia Panel. Was told not to meddle with the Nvidia panel if using inspector. Is there any truth to this or can I set DSR as well. Thanks and compliments of the Season to all. Running NI and DSR Ric Elmore
December 24, 201411 yr Thanks Ric Just tested running x2 and it definitely has improved sharpness and definition. Cheers Joaquin Blanco Intel Core i9-9900K at 5Ghz, Corsair Hydro H100i RGB PLATINUM CPU cooler, Asus ROG STRIX Z390-E,Motherboard, NVIDIA GeForce RTX 2080 Super 8GB GDDR6, G.Skill Trident Z RGB 32GB DDR4 3200MHz Memory, 500GB Samsung 970 EVO PLUS M.2 PCIe,2TB Samsung 860 QVO Solid State Drive, 2TB, 2 x Samsung 860 Evo 2TB, 1 x 1TB Samsung 860 Evo, Corsair RM650x 80 PLUS Gold 650W PSU.
December 24, 201411 yr Supported GPU´s: http://www.geforce.com/hardware/technology/dsr/supported-gpus I really don´t know about this, IMO just more load on the GPU, then the race is on for a new GPU, then they find some new "fancy tech trick", and so on and on... -_- Thanks, Frosty. Dirk.
December 25, 201411 yr Does DSR work with gtx970/980 only? No good for gtx780? Thanks, Dirk If you are running a single 1920x1080 monitor, DSR works beautifully using a gtx 780. I run DX10 use DSR at 4x w/25% smoothing and the performance is no worse (and in some cases better) than using 4x GSAA. I am happy for the OP's enthusiasm, though IMO the clarity displayed is not a good as one can get with DSR using a gtx 780 and the right settings. CPU: AMD 9800X3D PBO MB +200 CO -25| Motherboard: MSI MAG X870e Tomahawk WiFi | GPU: MSI RTX 5090 Ventus 3X OC | RAM: G.Skill 2x32GB DDR5 6000 cas 30 | M.2 SSDs: Samsung 990 EVO Plus 2T, WD Black SN750 M.2 1T | Hard Drive: WD Black HDD 6T 7200 | Optical Drive: LG Bluray writer, internal | Cooling: Thermalright Phantom Spirit 120 EVO | Case: Fractal Design Focus G | PSU: NZXT C1200 1200W Win 11 Pro 64|HP Reverb G2 revised VR HMD|Asus 25" IPS 2K 60Hz monitor|Saitek X52 Pro & Peddles|TIR 5 (now retired)
December 25, 201411 yr If you are running a single 1920x1080 monitor, DSR works beautifully using a gtx 780. I run DX10 use DSR at 4x w/25% smoothing and the performance is no worse (and in some cases better) than using 4x GSAA. I am happy for the OP's enthusiasm, though IMO the clarity displayed is not a good as one can get with DSR using a gtx 780 and the right settings. Great, I'll try it and I'm running DX10 as well. Thanks, Dirk.
December 25, 201411 yr Hi guys, I'm a little confused here, and could do with a little advice please. I currently run FSX through my 55 inch hi-def plasma TV at 1920x1080 res. I have a 660Ti graphics card which can run DSR. Only thing is though, when I tested it before (with geForce driver 344.48) I noticed that in the menus and occasionally within the sim, there was some horizontal 'wavering', almost like a heat haze effect. I was concerned that I might be overloading my card or my TV? Computer seemed to run stabily. Can anybody advise me on this please? Am I pushing my hardware to much? If so, I will not try it again. If this is not relevant, can somebody advise me of settings please? Many thanks, Andrew. Kind regards, Andrew.
December 25, 201411 yr I run DX10 use DSR at 4x w/25% smoothing and the performance is no worse (and in some cases better) than using 4x GSAA. At this settings what are your: MultiSamplesPerPixel=XX MultiSampleQuality=XX In nVidia Inspector what do you see in 'Antialiasing - Transparency Supersampling' field? Thanks, Dirk.
December 25, 201411 yr Author If you are running a single 1920x1080 monitor, DSR works beautifully using a gtx 780. I run DX10 use DSR at 4x w/25% smoothing and the performance is no worse (and in some cases better) than using 4x GSAA. I am happy for the OP's enthusiasm, though IMO the clarity displayed is not a good as one can get with DSR using a gtx 780 and the right settings. Especially since I am running at 3.0 and 33%. Thought about replacing my 680 for a 780 but the $600 price tag stopped me. where I am noticing most of the improvement is Airport and Aircraft lighting, especially AI lights. Clouds look better too. Hi guys, I'm a little confused here, and could do with a little advice please. I currently run FSX through my 55 inch hi-def plasma TV at 1920x1080 res. I have a 660Ti graphics card which can run DSR. Only thing is though, when I tested it before (with geForce driver 344.48) I noticed that in the menus and occasionally within the sim, there was some horizontal 'wavering', almost like a heat haze effect. I was concerned that I might be overloading my card or my TV? Computer seemed to run stabily. Can anybody advise me on this please? Am I pushing my hardware to much? If so, I will not try it again. If this is not relevant, can somebody advise me of settings please? Many thanks, Andrew. What you are probably experiencing is "Shimmering" I got that too and got rid of it through Nvidia Inspector. I set DX10 Fixer to 8x and NI accordingly as per the manual. Still experimenting. though. Ric Elmore
December 26, 201411 yr Not sure why the GTX 550 Ti Isn't on there - it seems to have made the cut on previous updates. Hi, I have the GTX 550 Ti, and together with the 347.09 drivers it works very well. I run with 3.0 on a 27" 1920x1080. Smooth performance. :smile: Staffan
Create an account or sign in to comment