April 3, 201511 yr Posting this to help out with the 2.5 sub-par graphics its not perfect but pretty close - the VC is excellent I am only referring to the external visuals just a bit of shimmering - also with FXAA on you will see a bit of blinking lights on ftx global lights but if you shut this off lights wont blink but anti-aliasing will be a mess - for now have to deal with it - Rob suggested a new driver install fresh - clean your old ones out and use a cleaner then follow the pics I have posted - simple and easy do nothing other than what I have shown in nvidia control panel - in P3D menu its up to you - also like to pass on thanks to Steve in his post where he said try upping the DSR smoothness to 50 - over 50 looked like it actually got worse so for now this will get you a better looking sim - lets hope we can dump the DSR someday - LM hint hint Forget NI as it will hit your FPS this is the best option without taking a hit - your DSR factor is your choice - I have picked the very first resolution upscale as I cant stand those tiny menus and the higher you go the smaller they get - also I am using a 32" monitor so that was fine on the first upscale - hope this helps - good luck Rich Sennett
April 3, 201511 yr I'm an envious AMD GPU owner. I'd love to play around with DSR settings. Derek RogersPC Specs: Intel i7-4790K 4.6GHz : 16GB RAM : GTX 970 4GB
April 3, 201511 yr No DSR with NVSurround... Unfortunately. 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
April 3, 201511 yr Wow Richard, this might be the best find! I just tried it on my i4770k with a 780ti. I can only go up to 2103x1183x32, but already it looks great and is very smooth. I have all the usual display settings, but I don't push all the sliders to the right, some slightly (water, tesselation) and others in the middle (scenery, autogen), few shadows which are big FPS eaters. Still looks amazing! Lee Lee H i9 13900KF 64GB Ram 24GB RTX 4090
April 3, 201511 yr I'm an envious AMD GPU owner. I'd love to play around with DSR settings. I used to be too, but I'm not so sure anymore ? There is so many many posts regarding people's struggling with Nvidea here, that it has frightened me off converting. I'm not totally happy with my AMD, though it seems to be much more trouble free and performance enhanced than the majority posting here ? So little AMD chatter here, I'm sure there there must be good or bad reason for that ? Sorry, good luck with the Nvidea tweeks. Ivan Smith
April 3, 201511 yr I'm an envious AMD GPU owner. I'd love to play around with DSR settings. The latest Omega drivers have the AMD DSR equivalent, Virtual Super Resolution (VSR). gb. So little AMD chatter here, I'm sure there there must be good or bad reason for that ? I think the main reason that AMD is ignored is that it is a dead end as far as P3D and SLI is concerned. Nvidia on the other hand despite it's faults with P3D will maybe.., one day..., offer full SLI support. gb. Posting this to help out with the 2.5 sub-par graphics its not perfect but pretty close Richard what's the point of adding the p3d.exe to the already existing profile? Prepar3D is listed because it is one of the programs already found on the computer. ? gb. YSSY. Win 10, [email protected], Corsair H115i Cooler, RTX 4070Ti, 32GB G.Skill Trident Z F4-3200, Samsung 960 EVO M.2 256GB, ASUS Maximus VIII Ranger, Corsair HX850i 850W, Thermaltake Core X31 Case, Samsung 4K 65" TV.
April 3, 201511 yr obviously i need glasses with 50% DSR. I normaly use 30% and the image is crisp and sharp. But with 50% it is totally blurred and i get headache when using it... Carsten U
April 3, 201511 yr Tried it. Way too soft or me. gb. YSSY. Win 10, [email protected], Corsair H115i Cooler, RTX 4070Ti, 32GB G.Skill Trident Z F4-3200, Samsung 960 EVO M.2 256GB, ASUS Maximus VIII Ranger, Corsair HX850i 850W, Thermaltake Core X31 Case, Samsung 4K 65" TV.
April 3, 201511 yr Cheers Rich PC SPECS: WINDOWS 10 X64 , Intel Core i9 9900K @ 4.9GHz, RAM: 64GB DDR4 1800MHz, MOTHERBOARD: GIGABYTE AORUS ULTRA Z390,GPU: NVIDIA ROG STRIX ROG 3080TI 12GB
April 3, 201511 yr Sadly I agree way to soft. Tried from 10%- 50% I personally fine anything that gives that washed over look not good as bad as jaggies in a different way. Everyone will have different opinions on this, no body is right or wrong its a taste thing. Still thanks for sharing and the time Rich David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
April 3, 201511 yr Using DSR and TrackIR seem to add a delay, at least for me. Anyway, I just need to use 2x AA to get crisp gauges, which is amazing. In FSX I had to throw in every bit of AA... Brynjar Mauseth
April 3, 201511 yr Does this work without p3d in fullscreen. Don't think so, right? It should work in fullscreen, yes. Brynjar Mauseth
Create an account or sign in to comment