March 3, 20188 yr 2 minutes ago, xender said: I just downloaded the product again but i still get the 1.0.3 release “You should receive the upgrade email from simMarket within the next 24 hours.” Quoted from the original post. I don’t think it’s available yet. Jim BarrettLicensed Airframe & Powerplant Mechanic, Avionics, Electrical & Air Data Systems Specialist. Qualified on: Falcon 900, CRJ-200, Dornier 328-100, Hawker 850XP and 1000, Lear 35, 45, 55 and 60, Gulfstream IV and 550, Embraer 135, Beech Premiere and 400A, MD-80.
March 3, 20188 yr 2 hours ago, sp0701 said: I think it's already accurate Please see this post: https://www.avsim.com/forums/topic/532016-engine-spool/ The engines on the md80 are notoriously slow to respond. Lian Li 011 Air Mini | AMD 9800X3D | Asus ROG STRIX B650E-F | Arctic Cooling Liquid Freezer II 280mm RGB | 2x32GB G.Skill DDR5-6000 | ASUS TUF RTX 5090 | Seasonic Prime Platinum 1000W | Pimax Crystal Light
March 3, 20188 yr Just received my email. The update is on SimMarket. Dan i9-13900K / Asus Maximus Hero Z790 / RTX 4090 FE / G.Skill Trident Z5 RGB 64 GB DDR5-6400 CL32 / Artic Liquid Freezer II 360 / Samsung 980 PRO SSD 1TB PCIe NVMe M.2 / Samsung 980 PRO SSD 2TB PCIe NVMe M.2 / Samsung 970 EVO Plus SSD 2TB PCIe NVMe M.2 / EVGA 1000W G3, 80+ Gold / Phanteks Eclipse P600S ATX Mid Tower / Arctic P14 PWM Case Fans / LG C2 42 Inch Class 4K OLED TV/Monitor / Windows 11 Pro / 1Ghz AT&T Fiber
March 3, 20188 yr Meekg (sorry Jim ), Any chance of providing update packages instead of having to uninstall/reinstall every time there is an update? Or an integrated updater? Not a huge deal - just a nicety. Thanks. Since I posted this, I'm a bit confused. The forum post here says you can install overtop of the original installation. However, the instructions on how to upgrade link in the first post says to deactivate/uninstall/reinstall/reactivate. Simmarket email just says to uninstall/reinstall. I'm probably overthinking this but can you clear it up for me? Thanks. Edited March 3, 20188 yr by RRVyper Wrong addressee. And further questions.
March 3, 20188 yr Thank you for all the hard work . David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
March 3, 20188 yr Hello. I received 1 hour ago an email from Simmarket to inform me about an update of the Maddog. So I download it BUT the name of the file is "Install_Fly_The_Maddog_X_64bit_edition_1.0.3.exe" not 1.04 ? Edit: redownload it again and now it's 1.04 Edited March 3, 20188 yr by PhilippeMendes
March 3, 20188 yr 14 hours ago, Pilot53 said: Please see this post: https://www.avsim.com/forums/topic/532016-engine-spool/ The engines on the md80 are notoriously slow to respond. Now i see ;)
March 3, 20188 yr Great update. My Load Manager is still very small. Am I missing something to get it larger?? Thanks for any suggestions. CaptMac
March 4, 20188 yr 14 hours ago, Capt Mac said: Great update. My Load Manager is still very small. Am I missing something to get it larger?? Thanks for any suggestions. CaptMac Yes I get same too with small text in Load Manager tool. Have 4K monitor.
March 4, 20188 yr 18 hours ago, Capt Mac said: Great update. My Load Manager is still very small. Am I missing something to get it larger?? Thanks for any suggestions. CaptMac +1
March 5, 20188 yr On 3/4/2018 at 5:05 AM, Capt Mac said: Great update. My Load Manager is still very small. Am I missing something to get it larger?? Thanks for any suggestions. CaptMac mine is still the same size from the original download I7-8700k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,, gtx 1080ti Card, RM850 power supply Peter kelberg
March 5, 20188 yr Author Commercial Member On 3/3/2018 at 8:13 PM, RRVyper said: Meekg (sorry Jim ), Any chance of providing update packages instead of having to uninstall/reinstall every time there is an update? Or an integrated updater? Not a huge deal - just a nicety. Thanks. Since I posted this, I'm a bit confused. The forum post here says you can install overtop of the original installation. However, the instructions on how to upgrade link in the first post says to deactivate/uninstall/reinstall/reactivate. Simmarket email just says to uninstall/reinstall. I'm probably overthinking this but can you clear it up for me? Thanks. To be honest it was not our intention to release continuous/frequent updates/installers. We used it as a quick way to address the "major" bugs discovered by users and we took this opportunity to throw in a couple of things that were developed/improved in the meantime. Ideally, if things are smooth and everyone is able to fly the Maddog X, you won't hear from us until SP1, which will be a pretty big expansion to this first release, including at least the shared cockpit functionality together with a failures controller/panel in order to enhance the use of failures, creating scenarios just like you do in level D simulator. Between the current release and SP1 we will update only if we consider the updates necessary or of big relevance. We might consider, when reworking the Load Manager to find a more user friendly way to push updates, but in all honesty we never spoke about it yet. I'll make a point to have this option evaluated. Regards Michele Galmozzi
March 5, 20188 yr 18 minutes ago, Meekg said: To be honest it was not our intention to release continuous/frequent updates/installers. We used it as a quick way to address the "major" bugs discovered by users and we took this opportunity to throw in a couple of things that were developed/improved in the meantime. Ideally, if things are smooth and everyone is able to fly the Maddog X, you won't hear from us until SP1, which will be a pretty big expansion to this first release, including at least the shared cockpit functionality together with a failures controller/panel in order to enhance the use of failures, creating scenarios just like you do in level D simulator. Between the current release and SP1 we will update only if we consider the updates necessary or of big relevance. We might consider, when reworking the Load Manager to find a more user friendly way to push updates, but in all honesty we never spoke about it yet. I'll make a point to have this option evaluated. Regards Thanks, Michele. I'm really enjoying learning this aircraft.
March 5, 20188 yr On 2.3.2018 at 8:55 PM, Meekg said: No, we are not using you as betatesters Updates are required and appreciated, no release ever is perfect. No need to apologize =) ,
March 5, 20188 yr On 3/2/2018 at 2:55 PM, Meekg said: We are finalizing release 1.0.4, which addresses the last few major cases of CTD and includes a few changes suggested by you. No, we are not using you as betatesters as some of our critics suggested; we simply addressed all the issues that you reported as fast as we could and we tried to include your suggestions which we though were more relevant. You should receive the upgrade email from simMarket within the next 24 hours. CHANGELOG: - Fixed random CTD selecting a DIR INTC in the FMS. - Fixed random CTD selecting SID/STAR in the FMS. - Fixed missing waypoints on FMS. - Fixed jetway not attaching correctly to the main exit door. - Fixed issue when defining ’toggle’ custom keyboard/joystick events. - Fixed minor issues on external model’s attach points and texture mapping. - Increased the size of the Load Manager UI for 4K res desktops. - Improved LNAV and LOC tracking. Please follow the instructions on how to upgrade. Hi Michele: Just wondered if you had any remarks on my question on any plans for further refining of the brakes? Thanks and best regards Rick
Archived
This topic is now archived and is closed to further replies.