Jump to content

Kaiii3

AIG AI Manager

Recommended Posts

8 minutes ago, David Roch said:

OK, thanks Ray.
FSUIPC shows 108 AI on my side, but I believe gates are quite empty for a Sunday in summer.

David, I’m not sure how you get 108 as I have the slider at 100% and have installed every airline. Do you have a commercial version of LIRF or is that the stock airport? I have a commercial addon.

Have you used Ai Companion to check the schedules against actuals? Kaiii3 hinted default AFCADs may not have suitably sized gates but your count suggests there are plenty of Ai being generated.


Ray (Cheshire, England).
System: P3D v4.5, Intel i7-8086K o/c to 4.6Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” UHD monitor, Fulcrum One yoke.
Cheadle Hulme Weather

Share this post


Link to post

Yes this is a commercial LIRF addon.
New attempt, 109 :

txDatX.jpg

I am not yet familiar with AIG so I've probably done something wrong.
Will give a try to this new Companion! 🙂

Edited by David Roch
typo

Best regards,
David Roch
9900K@4.9GHz, Asus Maximus XI Formula, 32Gb G.Skill 4133 CL17, EVGA RTX 3090, Samsung M.2 SSDs, Corsair 1600W PSU & Samsung curved 49" TV monitor 4K.

Share this post


Link to post

David, there's little to configure with AIG. You just install the airlines you want and if you then set Ai % to 100 it will show all available Ai.

Install Ai Companion and open Flight Finder. Filter for LIRF and Sunday. That will show you a list of Ai that should arrive and depart at the times shown. Identify a suitable flight for the local time.

Then switch to Live Traffic and see if that aircraft appears in the list. If it does then all is well and good. If it doesn't then you're probably best asking the question on the AIG forum where the experts reside.


Ray (Cheshire, England).
System: P3D v4.5, Intel i7-8086K o/c to 4.6Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” UHD monitor, Fulcrum One yoke.
Cheadle Hulme Weather

Share this post


Link to post
3 hours ago, Ray Proudfoot said:

It isn’t the taxi speed itself that’s the problem but the lack of intelligence when trying to depart the active runway. That can only be fixed by LM.

Yes the core issue is intelligent runway exiting but when the AI is being unintelligent and has just missed a turnoff it’s better to have it taxiing at a higher speed to exit the runway at the next turnoff.  Again not a perfect or full fix but it definitely helps.


Dave

Current System (Running at 1440p): ASUS ROG Maximus XII Hero Z490, i9 10900k @ 5.1Ghz, RTX2080ti, 32GB DDR4 3600 RAM, EVGA CLC 280mm AIO Cooler, Brunner CLS-E NG Yoke, Thrustmaster Warthog HOTAS, VirtualFly Ruddo+ and TQ6+

Share this post


Link to post
4 minutes ago, regis9 said:

Yes the core issue is intelligent runway exiting but when the AI is being unintelligent and has just missed a turnoff it’s better to have it taxiing at a higher speed to exit the runway at the next turnoff.  Again not a perfect or full fix but it definitely helps.

What utility do you suggest?


Ray (Cheshire, England).
System: P3D v4.5, Intel i7-8086K o/c to 4.6Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” UHD monitor, Fulcrum One yoke.
Cheadle Hulme Weather

Share this post


Link to post
3 hours ago, David Roch said:

I believe gates are quite empty for a Sunday in summer

I believe that would come down to your ade/afcad. Properly setup size wise and those gates will be full and traffic will offload to the remote stands etc. My custom LIRF is often quite packed.


i7-8700K, 16gb DDR4 3200,  GTX1080Ti, Win 10, P3d V5x

Share this post


Link to post
9 minutes ago, Dave_YVR said:

I believe that would come down to your ade/afcad. Properly setup size wise and those gates will be full and traffic will offload to the remote stands etc. My custom LIRF is often quite packed.

I have the MK Studios LIRF. Maybe there are others. I’ll check mine tomorrow.


Ray (Cheshire, England).
System: P3D v4.5, Intel i7-8086K o/c to 4.6Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” UHD monitor, Fulcrum One yoke.
Cheadle Hulme Weather

Share this post


Link to post
6 hours ago, Ray Proudfoot said:

What utility do you suggest?

This is what I use.

https://library.avsim.net/download.php?DLID=210865


Dave

Current System (Running at 1440p): ASUS ROG Maximus XII Hero Z490, i9 10900k @ 5.1Ghz, RTX2080ti, 32GB DDR4 3600 RAM, EVGA CLC 280mm AIO Cooler, Brunner CLS-E NG Yoke, Thrustmaster Warthog HOTAS, VirtualFly Ruddo+ and TQ6+

Share this post


Link to post

Dave, thanks. Reading the readme I'm curious about this statemen... "Increase AI timeout period to 11min".

What is the effect of this?


Ray (Cheshire, England).
System: P3D v4.5, Intel i7-8086K o/c to 4.6Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” UHD monitor, Fulcrum One yoke.
Cheadle Hulme Weather

Share this post


Link to post
16 hours ago, David Roch said:

Yes this is a commercial LIRF addon.
New attempt, 109 :

I am not yet familiar with AIG so I've probably done something wrong.
Will give a try to this new Companion! 🙂

Hi David,

This is a view of T7 taken at 15:10 Local on Sunday. Plenty of Ai as you can see. A count of 59 Ai on the ground and 13 airborne.

Rome_1511Sun_Local.jpg?dl=0


Ray (Cheshire, England).
System: P3D v4.5, Intel i7-8086K o/c to 4.6Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” UHD monitor, Fulcrum One yoke.
Cheadle Hulme Weather

Share this post


Link to post

Does anyone know how to backup all my AIG AI Files.  I have over 32gb of AI files/models (I did download it all over few weeks).

Lets say I want to reformat my sim drive and put AIG AI files into a different ssd and I want the sim to pick up my install.  Does anyone know on how to do it

Share this post


Link to post

@Skywolf, there should be a top-level folder for AIG. That contains everything related to their aircraft, plans etc. The only other reference is an entry in scenery.cfg which should be near or at the top. Just change the path in scenery.cfg and all should be fine.


Ray (Cheshire, England).
System: P3D v4.5, Intel i7-8086K o/c to 4.6Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” UHD monitor, Fulcrum One yoke.
Cheadle Hulme Weather

Share this post


Link to post
14 minutes ago, Skywolf said:

Does anyone know how to backup all my AIG AI Files.  I have over 32gb of AI files/models (I did download it all over few weeks).

Lets say I want to reformat my sim drive and put AIG AI files into a different ssd and I want the sim to pick up my install.  Does anyone know on how to do it

I've simply copied the whole AIG OCI Folder to a safe place.


- Harry J.

i7-7820X (@4.8 GHz), 32GB RAM (@3467) 2080Ti (3440x1440), SSD 500GB, (Win10x64),  SSDs 1+2 TB (P3Dv5.x + ORBX). FSGlobalNG (mesh), ORBX (Global+OLC, all FTX Regions, all TE products, many Airports), DDscenery (NY, CH, MIA), Airports (FT, FB, FSDT, AS); PMDG (737, 747, 777), MJC DQ400, RA Piston Duke, A2A C172. Weather ASP5. F1 GTN complete. AI Traffic: AIG OCI

 

 

 

Share this post


Link to post
1 hour ago, Nemo said:

I've simply copied the whole AIG OCI Folder to a safe place.

that can end up with some problems, as the addon.xml does currently work with absolute paths, this will be changed later in Version 1.0

1 hour ago, Ray Proudfoot said:

@Skywolf, there should be a top-level folder for AIG. That contains everything related to their aircraft, plans etc. The only other reference is an entry in scenery.cfg which should be near or at the top. Just change the path in scenery.cfg and all should be fine.

The Addon has no reference in the scenery.cfg itself, OCI is added to the Sim using the addon.cfg


AIGtechBanner_Kai_AVSIM.png

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    39%
    $9,950.00 of $25,000.00 Donate Now
×
×
  • Create New...