March 17, 20215 yr 3 minutes ago, Pilot53 said: Bugs so far: 1. FADEC completely broken, thrust just reverts to whatever the sim thinks is full power in the climb, toga, and mct detents. It completely overshoots the target N1. Currently not possible to have realistic climb and takeoff performance 2. Airplane lifts off the runway before VR by itself 3. Duct pressure not effected by engine N1 or bleed system loads 4. Spoilers move even without hydraulic pressure. 5. Crazy pitch changes when engaging the autopilot 6. Really bad lnav tracking in tighter turns 7. Engines sluggish to respond to throttle input even at higher N1 8. No landing gear sound 9. Engines too loud at cruise 10. Wrong or really bad cockpit wind sound 11. Sometimes switches dont work. Other than that, its a really nice plane with a lot of potential once they iron out these bugs. Ummm. same as P3D/FSX version.
March 17, 20215 yr 1 hour ago, Adrian123 said: Ummm. same as P3D/FSX version. Really?? Yikes, no excuse for that on p3d or fsx. I never bothered with an aerosoft product on p3d since we have so many better choices. Makes me think this stuff is never going to get fixed. Ah well, I knew the companies reputation but decided to buy anyway hoping this time would be different. Edited March 17, 20215 yr by Pilot53 Lian Li 011 Air Mini | AMD 9800X3D | Asus ROG STRIX B650E-F | Arctic Cooling Liquid Freezer II 280mm RGB | 2x32GB G.Skill DDR5-6000 | ASUS TUF RTX 5090 | Seasonic Prime Platinum 1000W | Pimax Crystal Light
March 17, 20215 yr Is the big yellow dummies book for this on Amazon yet? 5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.
March 18, 20215 yr Speed mode in descent doesnt actually maintain the selected speed and if you put the spoilers out it just nose dives. I also am having a terrible time with the LNAV. It is s turing like all over the place. Ron Hamilton "95% is half the truth, but most of it is lies, but if you read half of what is written, you'll be okay." __ Honey Boo Boo's Mom
March 18, 20215 yr 17 hours ago, Pilot53 said: Bugs so far: 1. FADEC completely broken, thrust just reverts to whatever the sim thinks is full power in the climb, toga, and mct detents. It completely overshoots the target N1. Currently not possible to have realistic climb and takeoff performance 2. Airplane lifts off the runway before VR by itself 3. Duct pressure not effected by engine N1 or bleed system loads 4. Spoilers move even without hydraulic pressure. 5. Crazy pitch changes when engaging the autopilot 6. Really bad lnav tracking in tighter turns 7. Engines sluggish to respond to throttle input even at higher N1 8. No landing gear sound 9. Engines too loud at cruise 10. Wrong or really bad cockpit wind sound 11. Sometimes switches dont work. Other than that, its a really nice plane with a lot of potential once they iron out these bugs. Like reading the first report from a beta tester on this aircraft. Glad I didn't waste my money buying it now
March 18, 20215 yr Lovely reply again from Aerosoft on the thrust reverser activation in flight... "I suggest simply not doing it as a work around.". Yep, let me just try to get to idle on my Xbox controller by mashing the B button, oh look I've gone into reverse thrust at 50ft above the runway because I tapped one time too much. word not allowed poor support, they are not interested in putting out a solid product, just want to be first to market with a pretty 3D model and ported over P3D code, bugs included. Such a shame.
March 18, 20215 yr 25 minutes ago, flycln said: Check out this... beauttiful... landing. Starts at 2:51:41. LOOL! He is watching this and laughing 🤣 AMD Ryzen 7 7800X3D, 64GB DDR5 6000MHZ RAM, RX7900XT, FreeSync 165hz 1440p display
March 18, 20215 yr 18 hours ago, Pilot53 said: Bugs so far: 1. FADEC completely broken, thrust just reverts to whatever the sim thinks is full power in the climb, toga, and mct detents. It completely overshoots the target N1. Currently not possible to have realistic climb and takeoff performance Out of curiosity what N1 values should be for MAX, TO, CLB? I re-calibrated my throttle several times inside EFB to get smoother operations and now seems a little better response Life time flight sim enthusiast, current airplane owner 172P (past C182F). FAA CP/IR ASEL/AMEL, FI ASELMy System: AMD Ryzen 9 9950X3D , MSI X870 GAMING PLUS, 64G RAM, ASUS RTX5090, 4T SSDPut my hands on (pic/dual/given)7GCAA, 8KCAB, BE24, BE76, BE35-C33, BE35, C150, C152, C172B/N/P/R/SP, 182F, M20E,M20C, M20J, AT6(SNJ4), PA28-140,PA28-151, PA28-161,PA28-181,PA28RT-201,PA28R-180/201T, PA24-250, PA32-300R, PA44, AC114, YAK-18T, YAK-52, SR22
March 18, 20215 yr 1 hour ago, Bobsk8 said: Like reading the first report from a beta tester on this aircraft. Glad I didn't waste my money buying it now I bought it and even with bugs I can complete entire flight without much problems. I do not have autopilot oscillation bug as some report. I do miss WX & terrain implementation, but definitely not regret buying it. While I have never flown CRJ IRL I handle Aerosoft version pretty good. I have absolute blast shooting approaches yesterday. Life time flight sim enthusiast, current airplane owner 172P (past C182F). FAA CP/IR ASEL/AMEL, FI ASELMy System: AMD Ryzen 9 9950X3D , MSI X870 GAMING PLUS, 64G RAM, ASUS RTX5090, 4T SSDPut my hands on (pic/dual/given)7GCAA, 8KCAB, BE24, BE76, BE35-C33, BE35, C150, C152, C172B/N/P/R/SP, 182F, M20E,M20C, M20J, AT6(SNJ4), PA28-140,PA28-151, PA28-161,PA28-181,PA28RT-201,PA28R-180/201T, PA24-250, PA32-300R, PA44, AC114, YAK-18T, YAK-52, SR22
March 18, 20215 yr 23 minutes ago, omarsmak30 said: LOOL! He is watching this and laughing 🤣 You don't have to open door when you see him LOL Life time flight sim enthusiast, current airplane owner 172P (past C182F). FAA CP/IR ASEL/AMEL, FI ASELMy System: AMD Ryzen 9 9950X3D , MSI X870 GAMING PLUS, 64G RAM, ASUS RTX5090, 4T SSDPut my hands on (pic/dual/given)7GCAA, 8KCAB, BE24, BE76, BE35-C33, BE35, C150, C152, C172B/N/P/R/SP, 182F, M20E,M20C, M20J, AT6(SNJ4), PA28-140,PA28-151, PA28-161,PA28-181,PA28RT-201,PA28R-180/201T, PA24-250, PA32-300R, PA44, AC114, YAK-18T, YAK-52, SR22
March 18, 20215 yr 1 hour ago, Bobsk8 said: Like reading the first report from a beta tester on this aircraft. Glad I didn't waste my money buying it now Don't listen to some of these guys. Everyone knows aerosoft planes are not deep dives like pmdg, but for what it is. It's pretty good. I'm guessing most of issues no one will really notice unless you drive a crj to work Edited March 18, 20215 yr by devgrp
March 18, 20215 yr 2 hours ago, Prpn said: Thrust reversers can be deployed in flight 🤡🤦♂️ Do you try to deploy reversers in the air when flying for your real job?
March 18, 20215 yr 18 minutes ago, devgrp said: Don't listen to some of these guys. Everyone knows aerosoft planes are not deep dives like pmdg, but for what it is. It's pretty good. I'm guessing most of issues no one will really notice unless you drive a crj to work I have flown Tube liners like Level D 767, Pmdg 737, etc for years. I can't imagine having one that can't even fly the ILS on Ap. It should be sent straight to the Avionics shop. 😉 Edited March 18, 20215 yr by Bobsk8
Archived
This topic is now archived and is closed to further replies.