March 18, 20215 yr 16 minutes ago, devgrp said: Don't listen to some of these guys. Everyone knows aerosoft planes are not deep dives like pmdg, but for what it is. It's pretty good. I'm guessing most of issues no one will really notice unless you drive a crj to work Did you not read the bug list just posted?? Maybe you won’t notice such a long list of defects. If you’re happy paying 50 euro for a buggy plane, i guess that’s your choice. I’ve bought this several times for fsx/p3d, and now for MSFS. Be aware that the bugs don’t necessarily get fixed by this dev. Oz Sim Rig: MSI RTX3090 Suprim, an old, partly-melted Intel 9900K @ 5GHz+, Honeycomb Alpha, Thrustmaster TPR Rudder, Warthog HOTAS, Reverb G2, Prosim 737 cockpit. Currently flying: MSFS: PMDG 737-700, Fenix A320, Leonardo MD-82, MIlviz C310, Flysimware C414AW, DC Concorde, Carenado C337. Prepar3d v5: PMDG 737/747/777. "There are three simple rules for making a smooth landing. Unfortunately, no one knows what they are."
March 18, 20215 yr 26 minutes ago, devgrp said: Do you try to deploy reversers in the air when flying for your real job? Not that I know the real Aircraft, but there must be a reason why they have to be armed before becoming operational. The only explanation I have for this that they would indeed be deploying in the air if used and that is why Mitusbishi equipped the aircraft with arming switchces.
March 18, 20215 yr 36 minutes ago, OzWhitey said: Did you not read the bug list just posted?? Maybe you won’t notice such a long list of defects. If you’re happy paying 50 euro for a buggy plane, i guess that’s your choice. I’ve bought this several times for fsx/p3d, and now for MSFS. Be aware that the bugs don’t necessarily get fixed by this dev. This is the list of things I have experience of others have reported so far : 1. The aircraft will bank hard from left to right when trying to capture WPT (20 degree bank). This is intermittent. 2. Aircraft is sometimes unable to catch GlideSlope havent seen that issue yet, only flow 2 ils app so far 3. Some users reports they are unable to map reverse thrust with Warthog X Dont have that controller, my saitek works fine 4. Unable to load a flightplan in FMS ( I followed the manual to the letter. doesn't work at all) . I just found that the location folder in the documentation is the wrong folder. I never load msfs into planes with fmc, I type it in myself (more fun because of keys) 5. If you spawn on the runway (Ready for taxi by default). Go to Cold and Dark and try to go back to Ready for Taxi, the MFD/PFD will be dark. Turnaround state will have PFD/MFD working. (you have to be patient. it can take up to 3 min for the PFD/MFD to come up) I always spawn at a gate and I used the panel state in the efb 6. In the INIT -- > ROUTE -- > CO PILOT LIST menu. If you add a file name manually, it's impossible to remove and that name file is permanent. ( I found the folder to delete the file %APPDATA%\Microsoft Flight Simulator\Packages\aerosoft‐crj\work) Dont know what this is referring to 7. If you delete the CRJ from Content Manager , you can no longer re-install the plane without delete all the CRJ file manually (MS Store purchase) Never tried that I did and I did purchase it, but all those bugs that was posted are not show stoppers. Plane still handles and flies nice, but what do I know I'm just an armchair pilot pretending lmao Edited March 18, 20215 yr by devgrp
March 18, 20215 yr 1 hour ago, devgrp said: Do you try to deploy reversers in the air when flying for your real job? The real airplane has a protection in place so you can't deploy them. And you know what, so do default airplanes. The argument from Aerosoft is that they can't model it because it would put too much load on the system 🤦♂️. Paying €50 to hear such lame excuses, while they will also happily throw the argument "the real CRJ does it like this so our virtual one as well" in other threads as well. And if you are someone like me who does not always have their HOTAS setup on the desk but also flies with a controller, needing button pushes for the thrust levers.... Imagine mashing those buttons to get to idle thrust, but one tap too much deploys the reversers at 50ft. Now imagine when this sim actually releases on the Xbox... It just shows their attitude towards paying customers, and their complete lack of interest in making a solid product instead of just their interpretation of a CRJ. It is a rehash of old buggy P3D code. Just reheated with a fresh 3D model. 36 minutes ago, Farlis said: Not that I know the real Aircraft, but there must be a reason why they have to be armed before becoming operational. The only explanation I have for this that they would indeed be deploying in the air if used and that is why Mitusbishi equipped the aircraft with arming switchces. They can not be deployed in the air on the real aircraft unless you are experiencing some kind of mechanical failure. Anyway, I am done already with this sorry excuse of an addon. I tried to be nice and report issues to the dev but they are clearly not interested, so I'm off to fly real planes again 🤡. Edited March 18, 20215 yr by Prpn
March 18, 20215 yr 2 minutes ago, Prpn said: The real airplane has a protection in place so you can't deploy them. And you know what, so do default airplanes. The argument from Aerosoft is that they can't model it because it would put too much load on the system 🤦♂️. Paying €50 to hear such lame excuses, while they will also happily throw the argument "the real CRJ does it like this so our virtual one as well" in other threads as well. And if you are someone like me who does not always have their HOTAS setup on the desk but also flies with a controller, needing button pushes for the thrust levers.... Imagine mashing those buttons to get to idle thrust, but one tap too much deploys the reversers at 50ft. Now imagine when this sim actually releases on the Xbox... It just shows their attitude towards paying customers, and their complete lack of interest in making a solid product instead of just their interpretation of a CRJ. It is a rehash of old buggy P3D code. Just reheated with a fresh 3D model. only thing I can say is dont do anything you wouldnt do in the real plane, like trying the reversers in flight, deploying landing gear @ 300kts . stuff like that lol
March 18, 20215 yr 1 minute ago, devgrp said: only thing I can say is dont do anything you wouldnt do in the real plane, like trying the reversers in flight, deploying landing gear @ 300kts . stuff like that lol Willfully ignoring the problem, sure. You go live your life that way 🙂 .
March 18, 20215 yr 1 minute ago, Prpn said: Willfully ignoring the problem, sure. You go live your life that way 🙂 . Thats like me driving down the highway and decides to pull the key while driving to see what happens. I wouldnt do that in a game even if it was modeled
March 18, 20215 yr Maybe read my post a bit better and see where it will trip regular users up as well. I know, reading is hard for some people.
March 18, 20215 yr 7 minutes ago, Prpn said: The real airplane has a protection in place so you can't deploy them. And you know what, so do default airplanes. The argument from Aerosoft is that they can't model it because it would put too much load on the system 🤦♂️. Paying €50 to hear such lame excuses, while they will also happily throw the argument "the real CRJ does it like this so our virtual one as well" in other threads as well. I understand you sentiments. Yes it's would be nice to have it fixed, but truth to be told this is very minor issue even for $50. I can tell 100 thing one can do wrong in simple 172 IRL but you won't see it even in super quality products like A2A! So yes I would like to see developer fix as much as they can. Yet there is common sense of priorities. Just because you front wheel doesn't go shimmy after hard landing doesn't stop us flying A2A 172? So personally for me it's not a big issue! Also worth mentioning I have flown several FAA certified sims in process of my commercial training. With hefty price tag $20k per and more per sim by the way! You would be surprised how many unrealistic and wrong thing can go with them! My CFI used to laugh and teased me "oh man how did you managed to do that" before resetting flight at instruction station. Yet it didn't bother FAA to certified as ADT LOL Life time flight sim enthusiast, current airplane owner 172P (past C182F). FAA CP/IR ASEL/AMEL, FI ASELMy System: AMD Ryzen 9 9950X3D , MSI X870 GAMING PLUS, 64G RAM, ASUS RTX5090, 4T SSDPut my hands on (pic/dual/given)7GCAA, 8KCAB, BE24, BE76, BE35-C33, BE35, C150, C152, C172B/N/P/R/SP, 182F, M20E,M20C, M20J, AT6(SNJ4), PA28-140,PA28-151, PA28-161,PA28-181,PA28RT-201,PA28R-180/201T, PA24-250, PA32-300R, PA44, AC114, YAK-18T, YAK-52, SR22
March 18, 20215 yr 44 minutes ago, Prpn said: The real airplane has a protection in place so you can't deploy them. I don't see this as a problem, more like an awesome way to do 10-15 degrees approaches
March 18, 20215 yr 1 hour ago, Prpn said: Anyway, I am done already with this sorry excuse of an addon. I tried to be nice and report issues to the dev but they are clearly not interested, so I'm off to fly real planes again 🤡. I guess you should be thankful Aerosoft didn't make that one too! -J 13700KF | RTX 4090 @ 1440 | 64GB DDR5 | 2 x 1TB SSDs | 1TB M.2 NVMe
March 18, 20215 yr We all know what the best CRJ for Flight Sim was. No contest. 😄 Take-offs are optional, landings are mandatory.The only time you have too much fuel is when you're on fire. To make a small fortune in aviation you must start with a large fortune.There's nothing less important than the runway behind you and the altitude above you. It's better to be on the ground wishing you were in the air, than in the air wishing you were on the ground.
March 18, 20215 yr Has anyone experienced a complete freeze of the whole cockpit? All the displays stop updating and nothing works any more. The aircraft still flies but you're not able to control anything! I was just pressing buttons on the FMS and it suddenly all froze, had to abort the flight. Tom Wright, UK PPL(A) SEP + Night Rating + IMC/IR(R) Microsoft Flight Simulator 2024 | AMD Ryzen 7 7800X3D | 32GB DDR5 6000MHz RAM | 16GB RTX 4080 Super | 2x 2TB Samsung 990 PRO M.2 | Thrustmaster TCA Airbus Sidestick + Quadrant | Logitech G Saitek Pro Flight Rudder Pedals | WinCTRL Airbus FCU + EFIS + MCDU
March 18, 20215 yr 5 minutes ago, Tom Wright said: Has anyone experienced a complete freeze of the whole cockpit? All the displays stop updating and nothing works any more. The aircraft still flies but you're not able to control anything! I was just pressing buttons on the FMS and it suddenly all froze, had to abort the flight. that issue is worth an FAQ entry for AS: https://forum.aerosoft.com/index.php?/topic/160458-displays-frozen-nothing-seems-to-work-but-switches-still-move-and-aircraft-keeps-flying/ actually ran into that one too, had to abort flight Phil Leaven i5 10600KF, 32 GB 3200 RAM, ASUS 4070 12GB EVO, Asus ROG Z490-H, 2 WD Black NVME for each Win11 (500GB) and MSFS (1TB), Rolling Cache 16GB, Photogrammetry always OFF, Live Weather and Live Traffic always ON, Res 2560x1440 on 27"
Archived
This topic is now archived and is closed to further replies.