June 10, 20214 yr 7 minutes ago, Alexx Pilot said: I will do a full reinstall, will it be necessary to remove all addons too? No, just uninstall and install in the same folder. All the addons will be okay. Ivan Majetic ROG CROSSHAIR X670E HERO; 7900X3D; NZXT KRAKEN ELITE 360, GIGABYTE RTX 4080; G.SKILL TridentZ NEO RGB DDR5 64 Gb, WD HDD 2TB, SAMSUNG 980PRO, SAMSUNG 970EVO Plus 2x, ALIENWARE 3423DWF
June 10, 20214 yr 3 minutes ago, Dirk98 said: Are SIMstarter, FSL A3XX, FSUIPC, AES A3XX updated to v5.2? Thanks. FsLabs not yet, fsuipc still shows 6.1.2 version, the rest I don’t use Ivan Majetic ROG CROSSHAIR X670E HERO; 7900X3D; NZXT KRAKEN ELITE 360, GIGABYTE RTX 4080; G.SKILL TridentZ NEO RGB DDR5 64 Gb, WD HDD 2TB, SAMSUNG 980PRO, SAMSUNG 970EVO Plus 2x, ALIENWARE 3423DWF
June 10, 20214 yr 5 hours ago, simbol said: 717 was updated already a couple fo months ago.. you didn't saw the notifications? I worked also with this update and replaced all the TDFi 717 dynamic lighting. Information here The other is in the queue.. it takes lot of time testing and updating all these effects with each P3D Release Candidate release, I have been doing NOTHING ELSE for the last 2 weeks lol S. I have the 717 Immersion up to date, so I just must have updated it and not even realized. Thats awesome. And I get these things take time. Keep up the good work, and thanks for making our hobby better! -Tony@PVD Tony Moore
June 10, 20214 yr 11 minutes ago, Dirk98 said: SIMstarter........... updated to v5.2? Thanks. Still waiting to be updated.https://forum.aerosoft.com/index.php?/topic/164547-p3d-52/
June 10, 20214 yr Commercial Member 2 hours ago, rob0203 said: Yes, but I still see grid patterns… Yuck, hate to hear that. Kyle Weber (Private Pilot, ASEL; Flight Test Engineer)Check out my repaints and downloads, all right here on AVSIM
June 10, 20214 yr 1 hour ago, airlinetycoon said: When I use EA I always get a DXGI Error Device Hung - Radeon 6900XT on latest driver. I installed 5.2 completely. If I start without EA, no problems, with EA DXGI Hung after 30 seconds. Any ideas? Try deleting the shaders in p3d and resetting the shader cache in Radeon settings/graphics options advanced. That worked for me in 5.1 worth a try... AMD Ryzen 5900X - Asus Crosshair VI Hero - G.Skill 32GB (2x16GB) 3000 C14 DDR4 @ 3600 14-14-15-14-28-42 AMD Red Devil Radeon 6900XT 2700/2112 1125mv - 3 x Iiyama G-Master GB2888UHSU 4k @ 11560x2160 Saitek X-55 Rhino - Track IR5 - Obutto Sim Cockpit + Triple Monitor Stand - Fancy some Techno? https://www.mixcloud.com/dj_bully/
June 10, 20214 yr 7 hours ago, mpo910 said: MPO, can I remove this box menu? Top left corner. Its completely unnecessary, because pressing anything opens the 2D screen but ONLY on the monitor screen, not the goggles. I don't know what it is for.... It spoils the reception that it hangs all the time. Pre render doesnt work for me, but the total optimalization is better in VR. Edited June 10, 20214 yr by YoYo Webmaster of yoyosims.pl.Win 10 64, i9 9900k, RTX 3090 24Gb, RAM32Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: HP Reverb G2
June 10, 20214 yr Author 4 minutes ago, YoYo said: MPO, can I remove this box menu? Top left corner. Its completely unnecessary, because pressing anything opens the 2D screen but ONLY on the monitor screen, not the goggles. I don't know what it is for.... It spoils the reception that it hangs all the time. Pre render doesnt work for me, but the total optimalization is better in VR. I know this very good indeed. You can click with your mouse on it it opens the menu in VR I've tried to convince LM of having a option to turned that off...but they denied that and stated they prefer to leave it on. But go ahead and ask at LM support. Maybe they remember why I asked for on\off option 😉 Edited June 10, 20214 yr by mpo910 Regards, Marcus P.
June 10, 20214 yr 24 minutes ago, djbully said: Try deleting the shaders in p3d and resetting the shader cache in Radeon settings/graphics options advanced. That worked for me in 5.1 worth a try... Did it - no success. In the moment I switch to EA, I get the DXGI-HUNG-ERROR. Greetings Andrew Bowler
June 10, 20214 yr Author 2 minutes ago, airlinetycoon said: Did it - no success. In the moment I switch to EA, I get the DXGI-HUNG-ERROR. I would post this at their support and mention that you use Radeon AMD cards. Because I know they have done optimizations in that segment but I don't have any AMD GPU so I could not test it. Others did, I saw. Please post at Public LM forum and ask for support. Regards, Marcus P.
June 10, 20214 yr 4 minutes ago, airlinetycoon said: Did it - no success. In the moment I switch to EA, I get the DXGI-HUNG-ERROR. Do you have any add-ons like Envshade? I'd consider any shader add-on to be completely incompatible with v5.2 at the moment. Even if you think it's not enabled, it's probably trying to override shaders. Also as @mpo910 said, it's a good idea to report the issue in official P3D forum. Edited June 10, 20214 yr by BiologicalNanobot PC specs: i5-12400F, RTX 3070 Ti and 32 GB of RAM. Simulators I'm using: X-Plane 12, Microsoft Flight Simulator (2020) and FlightGear.
June 10, 20214 yr 2 hours ago, ah2511 said: Updated by uninstalling/reinstalling the client. Performance seems great and overall quality feels much better. However using the PMDG NGXu at Flytampa YSSY resulted in a CTD when clicking “Airport Map” on the EFB. Faulting module was menus.dll Any suggestions? I believe I read that the menu subsystem was changed to HTML5, along with the single-line text banner. I've read that the single-line text banner needs the updated v5.2 content module installed to work, so maybe the menu system does too (?) Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
June 10, 20214 yr 11 minutes ago, mpo910 said: I know this very good indeed. You can click with your mouse on it it opens the menu in VR I've tried to convince LM of having a option to turned that off...but they denied that and stated they prefer to leave it on. But go ahead and ask at LM support. Maybe they remember why I asked for on\off option 😉 Pity. I can click and see menu, but each option open only settings on 2D monitor so it makes no sense ;). Webmaster of yoyosims.pl.Win 10 64, i9 9900k, RTX 3090 24Gb, RAM32Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: HP Reverb G2
Archived
This topic is now archived and is closed to further replies.