Skip to content
View in the app

A better way to browse. Learn more.

The AVSIM Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Leonardo Maddog to be released 30 April!

Featured Replies

23 minutes ago, pmplayer said:

Does the Autoland witin MSFS work with the Maddog X ?

Last flight it didn't work for me at EDDH RW23.

Could be a pilot mistake because of the first Autoand i did with this bird , so that's why i am asking.

Anyone..

cheers 😉

Before you can do an autoland, you have to run a test of the autoland system, and that must be done on the ground at your departure airport before takeoff. In the approach, both nav receivers have to be set to the ILS frequency, with the appropriate inbound course set on the course selectors. 

Jim Barrett

Licensed Airframe & Powerplant Mechanic, Avionics, Electrical & Air Data Systems Specialist. Qualified on: Falcon 900, CRJ-200, Dornier 328-100, Hawker 850XP and 1000, Lear 35, 45, 55 and 60, Gulfstream IV and 550, Embraer 135, Beech Premiere and 400A, MD-80.

  • Replies 929
  • Views 129.4k
  • Created
  • Last Reply
8 minutes ago, JRBarrett said:

Before you can do an autoland, you have to run a test of the autoland system, and that must be done on the ground at your departure airport before takeoff. In the approach, both nav receivers have to be set to the ILS frequency, with the appropriate inbound course set on the course selectors. 

Could you elaborate on this Test process?

Step 1 is? & so on.

Thank you

T45

48 minutes ago, JRBarrett said:

Before you can do an autoland, you have to run a test of the autoland system, and that must be done on the ground at your departure airport before takeoff. In the approach, both nav receivers have to be set to the ILS frequency, with the appropriate inbound course set on the course selectors. 

Does it work without that Test or is this a must be done for the System?

Both ILS Frequenz was set also both course

for copilot and pilot.

cheers 😉

Edited by pmplayer

08.2024 new PC is online :  ASUS ROG STRIX X670E-F GAMING WIFI Mainboard,  AMD Ryzen™ 9 7950X3D Prozessor, G.Skill DIMM 64 GB DDR5-6000 (2x 32 GB) Dual-Kit, MSI GeForce RTX 4090 VENTUS 3X E 24G OC Grafikkarte, 2x WD Black SN850X NVMe SSD 4 TB - Drive C+D, WD Gold Enterprise Class 12 TB for storage  HDD, Thermaltake Toughpower GF3 1000W PC - Power supply, Thermalright Phantom Spirit 120 EVO CPU Aircooler with 7 Heatpipes, Design Meshify 2 White TG Clear Tint Tower-Case, 3x 4K monitors 2x32 Samsung 1x27 LG  3840x2160, Windows11 Prof. 23H2 - now Windows11 Prof. 25H2

Flightsimulator Hardware: Honeycomb Throttle Bravo, Logitech Extreme 3D Pro, Logitech Flight Joke System, XBox Controller, some Thrustmaster stuff, Winwing CDU Panels.

spacer.pngspacer.png

1 hour ago, Treetops45 said:

Could you elaborate on this Test process?

Step 1 is? & so on.

Thank you

T45

I’m not at my FS computer until tonight, but I believe the procedure is spelled out in the operation manual included with the documents.

Jim Barrett

Licensed Airframe & Powerplant Mechanic, Avionics, Electrical & Air Data Systems Specialist. Qualified on: Falcon 900, CRJ-200, Dornier 328-100, Hawker 850XP and 1000, Lear 35, 45, 55 and 60, Gulfstream IV and 550, Embraer 135, Beech Premiere and 400A, MD-80.

AUTO LAND Mode Button
At first flight of the day or whenever weather conditions (CAT III A/IIIB) on destination require use of the autoland, the availability test should be completed:
VHF NAV Radios ............................................................................................................................ SET
Set both VHF NAV radios to an ILS frequency (preferably non-local).
AUTOLAND Mode Button ........................................................................................................... PUSH

Found in "C:\Users\rough\Documents\Maddog X Files\Docs\Volume 2", Refer to pp. 6 for further INFO.

i913900KF (5.8GHz) | Case: Fractal PopAir RGB I Gigabyte Z790 UD AX| MSI Gaming RTX 4070Ti Super 16GB | Kingston Fury Beast 64GB DDR5 5200Mhz | SOLIDIGM P41 Plus 2TB NVMe M.2 SSD | Samsung SSD 870 EVO 2TB | Thermalright Frozen Notte 240 MM Liquid Cooling | LG EVO 42" Monitor 3840 x 2160 120Hz | Honeycomb Alpha & Bravo | Logitech G Pro pedals | Tobii EyeTracker | 850W Thermaltake 80+ GOLD |

Has anyone experienced this yet?

unknown.png?width=2136&height=1202

Life time flight sim enthusiast, current airplane owner 172P (past C182F). FAA CP/IR ASEL/AMEL, FI ASEL

My System: AMD Ryzen 9 9950X3D , MSI X870 GAMING PLUS, 64G RAM, ASUS RTX5090, 4T SSD

Put my hands on (pic/dual/given)

7GCAA, 8KCAB, BE24, BE76, BE35-C33, BE35, C150, C152, C172B/N/P/R/SP, 182F, M20E,M20C, M20J, AT6(SNJ4), PA28-140,PA28-151, PA28-161,PA28-181,PA28RT-201,PA28R-180/201T, PA24-250, PA32-300R, PA44, AC114, YAK-18T, YAK-52, SR22

 

47 minutes ago, sd_flyer said:

Has anyone experienced this yet?

unknown.png?width=2136&height=1202

Nope. To be honest I have never seen MSFS CTD with a popup in general...

Edited by Fiorentoni

For transparency: I'm a community mentor at the BATC discord. However, I do not get paid for it in any way.

58 minutes ago, sd_flyer said:

Has anyone experienced this yet?

unknown.png?width=2136&height=1202

Do you by chance undervolt your GPU? It usually is a sign of conflicting 3rd party addon or apps. Did you tried with empty community folder? But sometimes if GPU can't keep up might lead to this.

Edited by the_simpilot

9 minutes ago, the_simpilot said:

Do you by chance undervolt your GPU?

Interesting thought! I never had this error before MD-80. I believe my rig has PSU is 750W with RTX 3090

Life time flight sim enthusiast, current airplane owner 172P (past C182F). FAA CP/IR ASEL/AMEL, FI ASEL

My System: AMD Ryzen 9 9950X3D , MSI X870 GAMING PLUS, 64G RAM, ASUS RTX5090, 4T SSD

Put my hands on (pic/dual/given)

7GCAA, 8KCAB, BE24, BE76, BE35-C33, BE35, C150, C152, C172B/N/P/R/SP, 182F, M20E,M20C, M20J, AT6(SNJ4), PA28-140,PA28-151, PA28-161,PA28-181,PA28RT-201,PA28R-180/201T, PA24-250, PA32-300R, PA44, AC114, YAK-18T, YAK-52, SR22

 

I saw it for the first time yesterday at the end of the flight (BAe 146) just as the sim was closing, that same message popped up.

AMD Ryzen 7 5800x3d, MSI X570 Pro, 32 gb DDR4 3600 ram, Gigabyte 6800 16gb GPU, 1x 2tb Samsung  NvMe , 1x 2tb Sabrent NvME, 1x Crucial 4tb Nvme M2 Drive

4 minutes ago, sd_flyer said:

Interesting thought! I never had this error before MD-80. I believe my rig has PSU is 750W with RTX 3090

I had the same error and I do undervolt my 3070ti. After a deep investigation I found out that it was a combination of too much undervolting and the B787X and the Rex Simulations Global Airport textures which was partially compatible with SU9 in the community folder. It might be different for you but it is  most likely an addon in your community folder. I also recommend rebuilding your Rolling Cache if you haven't after SU9.

Edited by the_simpilot

14 minutes ago, the_simpilot said:

I had the same error and I do undervolt my 3070ti. After a deep investigation I found out that it was a combination of too much undervolting and the B787X and the Rex Simulations Global Airport textures which was partially compatible with SU9 in the community folder. It might be different for you but it is  most likely an addon in your community folder. I also recommend rebuilding your Rolling Cache if you haven't after SU9.

Thanks I will try!

Life time flight sim enthusiast, current airplane owner 172P (past C182F). FAA CP/IR ASEL/AMEL, FI ASEL

My System: AMD Ryzen 9 9950X3D , MSI X870 GAMING PLUS, 64G RAM, ASUS RTX5090, 4T SSD

Put my hands on (pic/dual/given)

7GCAA, 8KCAB, BE24, BE76, BE35-C33, BE35, C150, C152, C172B/N/P/R/SP, 182F, M20E,M20C, M20J, AT6(SNJ4), PA28-140,PA28-151, PA28-161,PA28-181,PA28RT-201,PA28R-180/201T, PA24-250, PA32-300R, PA44, AC114, YAK-18T, YAK-52, SR22

 

Anyone with the TM TCA throttle was able to set it up? I tried both Axis and 0-100% axis, but it won't work properly. 

Archived

This topic is now archived and is closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.