November 12, 20223 yr I ran the new update and I went to check out the new SU11 airports. I am having some serious issues with Meigs and Kai Tak. Meigs is a mess, no runway and my plane was in the water at start up. At Kai Tak, there is a building on the runway. I happen to have DD Chicago City and Sam Scene Hong Kong, and I’m wondering if these are causing the issues. Thanks in advance for any ideas. Cheers, Pete Pete Solov - Lake in the Hills 3CK and Schaumburg Regional 06CProud AOPA Member - PPL 2001Real World Piper Cherokee Pilot
November 12, 20223 yr I haven’t been to Meigs yet, but my Kai Tak is fine, I don’t have the Samscene addon installed. Dave Current System (Running at 4k): ASUS ROG STRIX X670E-F, Ryzen 7800X3D, RTX 5090, 55" Samsung Q80T, 64GB DDR5 6000 RAM, EVGA CLC 280mm AIO Cooler, Brunner CLS-E NG Yoke, Thrustmaster Warthog HOTAS & Stick, Thrustmaster TCA Quadrant & Add-on, VirtualFly Ruddo+, TQ6+ and Yoko+, GoFlight MCP-PRO and EFIS, Skalarki FCU and MCDU
November 12, 20223 yr Commercial Member 23 minutes ago, PilotPete99 said: Sam Scene Hong Kong Any version buyers (Marketplace and our store and simmarket) If you need to remove the kai tak cruise terminal, please DOWNLOAD this exclusion package, put it into your MSFS community folder. https://drive.google.com/file/d/1jqBEVLJ2jNYRtBq-Y1G0FgoBc5ryYw3r/view Source: https://samscene.com/collections/msfs/products/hong-kong-city-times
November 12, 20223 yr Author 2 minutes ago, polosim said: Any version buyers (Marketplace and our store and simmarket) If you need to remove the kai tak cruise terminal, please DOWNLOAD this exclusion package, put it into your MSFS community folder. https://drive.google.com/file/d/1jqBEVLJ2jNYRtBq-Y1G0FgoBc5ryYw3r/view Source: https://samscene.com/collections/msfs/products/hong-kong-city-times Thanks! I will give this a shot. Cheers, Pete Pete Solov - Lake in the Hills 3CK and Schaumburg Regional 06CProud AOPA Member - PPL 2001Real World Piper Cherokee Pilot
November 12, 20223 yr 1 hour ago, PilotPete99 said: Meigs is a mess Meigs works just fine here. If your Community folder shows empty, just reboot the sim again and report back. Dave Swigert WIN 11 i9-14900KF 64 GB ram Viewsonic 32" 60Hz 2K monitor NVIDIA MSI RTX 4080S Asrock Z790
November 12, 20223 yr Commercial Member 1 hour ago, PilotPete99 said: happen to have DD Chicago City 18 minutes ago, Eclex said: Meigs works just fine here. Because OP has installed DD Chicago Landmarks reported as not compatible in current state.
November 12, 20223 yr Author 4 minutes ago, polosim said: Because OP has installed DD Chicago Landmarks reported as not compatible in current state. Thanks, that is what I suspected. Hopefully they’ll release a patch soon. The Kai Tak fix worked, thanks much! Cheers, Pete Edited November 12, 20223 yr by PilotPete99 Pete Solov - Lake in the Hills 3CK and Schaumburg Regional 06CProud AOPA Member - PPL 2001Real World Piper Cherokee Pilot
November 12, 20223 yr The ORBX Dubai landmarks will also interfere with one of the Helipads added in Dubai.
November 12, 20223 yr DD Chicago is the only add-on that I regret buying. It not only messes up the Meigs Field in the SU11 release, it messed up the Meigs Field that was previously sold in the in-sim marketplace (with airport trees floating in the sky). DD Chicago also has horrendous FPS and stutters over the city. I suffered issues with DD Chicago that never occurred for me with any other add-on. I didn't ask for my money back because I thought a fix would be offered. It never was. Processor: Intel i9-13900KF 5.8GHz 24-Core, Graphics Processor: Nvidia RTX 4090 24GB GDDR6, System Memory: 64GB High Performance DDR5 SDRAM 5600MHz, Operating System: Windows 11 Home Edition, Motherboard: Gigabyte Z790 Aorus Elite AX, LGA 1700, CPU Cooling: Corsair H100i Elite 240mm Liquid Cooling, RGB and LCD Display, Chassis Fans: Corsair Low Decibel, Addressable RGB Fans, Power Supply: Corsair HX1000i Fully Modular Ultra-Low-Noise Platinum ATX 1000 Watt, Primary Storage: 2TB Samsung Gen 4 NVMe SSD, Secondary Storage: 1TB Samsung Gen 4 NVMe SSD, VR Headset: Meta Quest 2, Primary Display: SONY 4K Bravia 75-inch, 2nd Display: SONY 4K Bravia 43-inch, 3rd Display: Vizio 28-inch, 1920x1080. Controller: Xbox Controller attached to PC via USB.
November 12, 20223 yr I quickly deleted Meigs because it is not how I remember Chicago when I was last there with the old tower being the only remnant of Meigs Field remaining. But I agree DD Chicago is framerate hog - glad it is not just me. Bruce Bruce Bartlett Frodo: "I wish none of this had happened." Gandalf: "So do all who live to see such times, but that is not for them to decide. All we have to decide is what to do with the time that is given to us."
November 12, 20223 yr 2 hours ago, polosim said: Because OP has installed DD Chicago Landmarks reported as not compatible in current state. I moved the new Meigs scenery out of the Official folder and run it in the Community folder with a Z in front of the name to give it higher priority. Now, it works just fine with DD Chicago. 🙂 Bert
November 12, 20223 yr 7 hours ago, Bert Pieke said: I moved the new Meigs scenery out of the Official folder and run it in the Community folder with a Z in front of the name to give it higher priority. Now, it works just fine with DD Chicago. 🙂 This worked for me with the previous addon Meigs. I have not looked at the new default Meigs. Is it better than the previous addon? Frank Patton Corsair 5000D Airflow Case; MSI B650 Tomahawk MOB; Ryzen 7 7800 X3D CPU; ASUS RTX 4080 Super; NZXT 360mm liquid cooler; Corsair Vengeance 64GB DDR5 4800 MHz RAM; RMX850X Gold PSU;; ASUS VG289 4K 27" Display; Honeycomb Alpha & Bravo, Crosswind 3's w/dampener. Former USAF meteorologist & ground weather school instructor. AOPA Member #07379126 "I will never put my name on a product that does not have in it the best that is in me." - John Deere
November 12, 20223 yr 9 hours ago, Bert Pieke said: I moved the new Meigs scenery out of the Official folder and run it in the Community folder with a Z in front of the name to give it higher priority. Now, it works just fine with DD Chicago. 🙂 Instead of doing that, perhaps you might want to try the "Package Reorder Tool" that was added with SU10. If my understanding is correct, you would not have to move or rename anything. https://docs.flightsimulator.com/flighting/html/Additional_Information/Experimental_Features.htm Navigraph is using this to override the sim's nav data with their own data. ...jim ASUS Prime Z790-E, Intel i9 13900K, 32Gb DDR5 Ram, Nvidia 3090 24Gb, Samsung 970 EVO Plus 500 GB and 1 TB, Samsung Odyssey G9 Ultrawide 49" G-SYNC Monitor.
November 12, 20223 yr 11 hours ago, PilotPete99 said: Thanks, that is what I suspected. Hopefully they’ll release a patch soon. The Kai Tak fix worked, thanks much! Cheers, Pete Try this. As said by @JimBrown, there's a new way to set priorities after SU10: Cheers, Ed MSFS2020 Steam // Rig: Corsair Graphite 760T Full Tower - ASUS MBoard Maximus XII Hero Z490 - CPU Intel i9-10900K - 64GB RAM - MSI RTX2080 Super 8GB - [1xNVMe M.2 1TB + 1xNVMe M.2 2TB (Samsung)] + [1xSSD 1TB + 1xSSD 2TB (Crucial)] + [1xSSD 1TB (Samsung)] + 1 HDD Seagate 2TB + 1 HDD Seagate External 4TB - Monitor LG 29UC97C UWHD Curved - PSU Corsair RM1000x // Thrustmaster FCS & MS XBOX Controllers
November 12, 20223 yr 2 hours ago, fppilot said: This worked for me with the previous addon Meigs. I have not looked at the new default Meigs. Is it better than the previous addon? I think so.. Bert
Archived
This topic is now archived and is closed to further replies.