January 28, 20251 yr 2 minutes ago, Claudius_ said: The new 4 DLSS work good here with my 3080 and FG (dlssg-to-fsr3), almost no ghosting, clearer image at quality level. work good with FS20 and FS24 Missing the PMDG DC6 in MSFS 2024 (she's here, but...).
January 28, 20251 yr 16 hours ago, Mace said: They make it hard to wait until the 30th, don't they. It's perfect for me as I haven't installed 2024 yet despite buying around Nov 19. I think this will really enhance the conversion impact for me so I'm totally good with the 30th! I plan to install 2024 after SU1 final launches. Noel System: 9900X3D Noctua NH-D15 G2, MSI Pro 650-P WiFi, G.SKILL 64GB (2 x 32GB) 288-Pin PC RAM DDR5 6000, WD NVMe 2Tb x 1, Sabrent NVMe 2Tb x 1, RTX 4090 FE, Corsair RM1000W PSU, Win11 Home, LG Ultra Curved Gsync Ultimate 3440x1440, Phanteks Enthoo Pro Case, TCA Boeing Edition Yoke & TQ, Cessna Trim Wheel, RTSS Framerate Limiter w/ Front Edge Sync. Aircraft used in MSFS 2024: Fenix A320, Aerosoft CRJ, FBW, WT 787X, I-Fly 737 MAX 8, Citation Longitude.
January 28, 20251 yr 4 hours ago, cianpars said: Have I missed anything? I have not seen any performance improvement so far.
January 28, 20251 yr I have installed everything except the advanced video driver. Now, when I try to start AutoFPS, it tells me I have a compatibility issue. I have tried rebooting everything but that message comes up every time now and then the app closes. Any ideas or anyone else having this issue? Case: (Lian Li PC-011 Dynamic XL), PSU: (MEG Ai300p pcie 5 & ATX 3.0), Motherboard: (ASUS TUF Gaming x670E-PLUS WIFI 6E), CPU: (AMD Ryzen 7 7800-X3D) Memory: (G.Skill Trident Z5 NEO RGB Series 64GB DDR5 6000), GPU: (Zotac Gaming GeForce RTX 4090 AMP Extreme Airo). CPU Cooler: (ASUS ROG Strix LC RGB 360) Fans: (7 Corsair LL Series 120mm RGB)
January 28, 20251 yr 36 minutes ago, Rob G said: I have installed everything except the advanced video driver. Now, when I try to start AutoFPS, it tells me I have a compatibility issue. I have tried rebooting everything but that message comes up every time now and then the app closes. Any ideas or anyone else having this issue? Did you get the latest AutoFPS version? If you do, what sometimes fix the compatibility issue, is to go to the graphics menu in the sim, change any setting, then save. Edited January 28, 20251 yr by Cpt_Piett 7950X3D | RTX 4090 | 64GB DDR5
January 28, 20251 yr 1 hour ago, Cpt_Piett said: Did you get the latest AutoFPS version? If you do, what sometimes fix the compatibility issue, is to go to the graphics menu in the sim, change any setting, then save. I have the latest and I changed a setting graphics setting, but I still get the compatibility error. Not sure what to do. Hate to have to remove all the DLSS 4 stuff. Case: (Lian Li PC-011 Dynamic XL), PSU: (MEG Ai300p pcie 5 & ATX 3.0), Motherboard: (ASUS TUF Gaming x670E-PLUS WIFI 6E), CPU: (AMD Ryzen 7 7800-X3D) Memory: (G.Skill Trident Z5 NEO RGB Series 64GB DDR5 6000), GPU: (Zotac Gaming GeForce RTX 4090 AMP Extreme Airo). CPU Cooler: (ASUS ROG Strix LC RGB 360) Fans: (7 Corsair LL Series 120mm RGB)
January 28, 20251 yr 1 minute ago, Rob G said: I have the latest and I changed a setting graphics setting, but I still get the compatibility error. Not sure what to do. Hate to have to remove all the DLSS 4 stuff. You could ask the developer in this thread. I'm on test3 (test4 is the latest) and it's working. Edited January 28, 20251 yr by Cpt_Piett 7950X3D | RTX 4090 | 64GB DDR5
January 29, 20251 yr So I have everything for DLSS 4 installed and I think it's probably working. However, even though I made the registry change to allow a display of the DLSS info, I don't get the display in the lower left. Any ideas why that would not work? My compatibility error was due to the fact that I had 0.4.4.4 installed and I needed 0.4.4.5 installed because I am using the SU1 Beta of MSFS2024. Edited January 29, 20251 yr by Rob G Additional Info Case: (Lian Li PC-011 Dynamic XL), PSU: (MEG Ai300p pcie 5 & ATX 3.0), Motherboard: (ASUS TUF Gaming x670E-PLUS WIFI 6E), CPU: (AMD Ryzen 7 7800-X3D) Memory: (G.Skill Trident Z5 NEO RGB Series 64GB DDR5 6000), GPU: (Zotac Gaming GeForce RTX 4090 AMP Extreme Airo). CPU Cooler: (ASUS ROG Strix LC RGB 360) Fans: (7 Corsair LL Series 120mm RGB)
January 29, 20251 yr 18 minutes ago, Rob G said: However, even though I made the registry change to allow a display of the DLSS info, I don't get the display in the lower left. I was having the same issue and noticed that I had not named the registry correctly. I can't remember the name now, but how did you name it? Not sure if that makes a difference, it did for me. By the way, I reverted back to the previous driver and to DLSS 3 because I was having all kinds of issues with the advanced driver. I'll wait for Nvidia's official release on the 30th. Edited January 29, 20251 yr by Huascar
January 29, 20251 yr 28 minutes ago, Rob G said: So I have everything for DLSS 4 installed and I think it's probably working. However, even though I made the registry change to allow a display of the DLSS info, I don't get the display in the lower left. You dont get watermark unless you want it - its working - you have to edit a reg file to turn that on Also why bother new driver is out in 2 days 🙂 Edited January 29, 20251 yr by Richard Sennett Rich Sennett
January 29, 20251 yr 39 minutes ago, Rob G said: So I have everything for DLSS 4 installed and I think it's probably working. However, even though I made the registry change to allow a display of the DLSS info, I don't get the display in the lower left. Any ideas why that would not work? My compatibility error was due to the fact that I had 0.4.4.4 installed and I needed 0.4.4.5 installed because I am using the SU1 Beta of MSFS2024. Follow this, https://www.pcgamer.com/nvidia-dlss-indicator/ i7-13700KF @ 5.3GHz 32.0GB DDR5 @ 5600 RTX 3080 65" LG OLED @ 4k
January 29, 20251 yr 50 minutes ago, 0stones0 said: Follow this, https://www.pcgamer.com/nvidia-dlss-indicator/ I have. It still does not display. Case: (Lian Li PC-011 Dynamic XL), PSU: (MEG Ai300p pcie 5 & ATX 3.0), Motherboard: (ASUS TUF Gaming x670E-PLUS WIFI 6E), CPU: (AMD Ryzen 7 7800-X3D) Memory: (G.Skill Trident Z5 NEO RGB Series 64GB DDR5 6000), GPU: (Zotac Gaming GeForce RTX 4090 AMP Extreme Airo). CPU Cooler: (ASUS ROG Strix LC RGB 360) Fans: (7 Corsair LL Series 120mm RGB)
January 29, 20251 yr 15 minutes ago, Rob G said: I have. It still does not display. Set the value of this to 1024 in decimal. I know I left this hexadecimal the 1st time and that didn't work. i7-13700KF @ 5.3GHz 32.0GB DDR5 @ 5600 RTX 3080 65" LG OLED @ 4k
January 29, 20251 yr 2 hours ago, 0stones0 said: Set the value of this to 1024 in decimal. I know I left this hexadecimal the 1st time and that didn't work. That’s what i have. Wish i could figure this out. Strange thing is that yesterday the display was showing. I haven’t touched the registry since. Makes me wonder if everything is working. Case: (Lian Li PC-011 Dynamic XL), PSU: (MEG Ai300p pcie 5 & ATX 3.0), Motherboard: (ASUS TUF Gaming x670E-PLUS WIFI 6E), CPU: (AMD Ryzen 7 7800-X3D) Memory: (G.Skill Trident Z5 NEO RGB Series 64GB DDR5 6000), GPU: (Zotac Gaming GeForce RTX 4090 AMP Extreme Airo). CPU Cooler: (ASUS ROG Strix LC RGB 360) Fans: (7 Corsair LL Series 120mm RGB)
January 29, 20251 yr I’ve done the swapper and profile J. Performance is very good but still blurry screens in Fenix and PMDG. I wonder if the driver release will help with those? Or if there is something else I can do to sharpen the screens up?! hoping this will save me spending on a new card for a while longer (3090 currently).
Create an account or sign in to comment