January 27, 20251 yr I normally fly my PCL VR headset now again in 2024, like I used to do in 2020. Since 571.96 I can crank up the visual options in MSFS and Pimax play. 5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.
January 27, 20251 yr You guys convinced me and I'm trying the new driver 😄 9800X3d, 4090, 64 GB DDR5 6000 RAM, 4 TB NVME (2x2), 4K Ultra + Framegen
January 27, 20251 yr 8 minutes ago, JonathanC said: You guys convinced me and I'm trying the new driver 😄 They make it hard to wait until the 30th, don't they. Rhett 7800X3D ♣ 96 GB G.Skill Flare ♣ Gigabyte 4090 ♣ Crucial P5 Plus 2TB
January 27, 20251 yr 1 minute ago, Mace said: They make it hard to wait until the 30th, don't they. Kinda low stakes though - it's easy to roll back so at worst you lose like 20 min max. Not like I'd need to reinstall Windows or something. 9800X3d, 4090, 64 GB DDR5 6000 RAM, 4 TB NVME (2x2), 4K Ultra + Framegen
January 28, 20251 yr I have set everything up according to the instructions. I also installed the advance copy Driver. However, my system would crash every time I tried to bring it up UNTIL I fell back to the NCP. I have the regedit change it says everything it should. But I am confused as to the urgency or need for the advance copy NCP in order for any of this to work. Thanks ....... Case: (Lian Li PC-011 Dynamic XL), PSU: (MEG Ai300p pcie 5 & ATX 3.0), Motherboard: (ASUS TUF Gaming x670E-PLUS WIFI 6E), CPU: (AMD Ryzen 7 7800-X3D) Memory: (G.Skill Trident Z5 NEO RGB Series 64GB DDR5 6000), GPU: (Zotac Gaming GeForce RTX 4090 AMP Extreme Airo). CPU Cooler: (ASUS ROG Strix LC RGB 360) Fans: (7 Corsair LL Series 120mm RGB)
January 28, 20251 yr 14 minutes ago, Rob G said: I have set everything up according to the instructions. I also installed the advance copy Driver. However, my system would crash every time I tried to bring it up UNTIL I fell back to the NCP. I have the regedit change it says everything it should. But I am confused as to the urgency or need for the advance copy NCP in order for any of this to work. Thanks ....... Just wait a few more days for the official release if things are breaking. Not worth investing time trouble shooting - just wait ~2 days. 9800X3d, 4090, 64 GB DDR5 6000 RAM, 4 TB NVME (2x2), 4K Ultra + Framegen
January 28, 20251 yr 15 minutes ago, JonathanC said: Just wait a few more days for the official release if things are breaking. Not worth investing time trouble shooting - just wait ~2 days. Everything seems correct to me on my system. I just didn't know if DLSS 4 will work with the current NCP or does it need the new one to function? That is my question. Case: (Lian Li PC-011 Dynamic XL), PSU: (MEG Ai300p pcie 5 & ATX 3.0), Motherboard: (ASUS TUF Gaming x670E-PLUS WIFI 6E), CPU: (AMD Ryzen 7 7800-X3D) Memory: (G.Skill Trident Z5 NEO RGB Series 64GB DDR5 6000), GPU: (Zotac Gaming GeForce RTX 4090 AMP Extreme Airo). CPU Cooler: (ASUS ROG Strix LC RGB 360) Fans: (7 Corsair LL Series 120mm RGB)
January 28, 20251 yr 3 minutes ago, Rob G said: Everything seems correct to me on my system. I just didn't know if DLSS 4 will work with the current NCP or does it need the new one to function? That is my question. I’m using it without the nvidia AP, works fine. 7950X3D | RTX 4090 | 64GB DDR5
January 28, 20251 yr Working fine for me as well. Installed the driver, used DLSS Swapper, and set J and it all just works. 9800X3d, 4090, 64 GB DDR5 6000 RAM, 4 TB NVME (2x2), 4K Ultra + Framegen
January 28, 20251 yr 53 minutes ago, Rob G said: have set everything up according to the instructions. I also installed the advance copy Driver. However, my system would crash every time I tried to bring it up UNTIL I fell back to the NCP. I have the regedit change it says everything it should. But I am confused as to the urgency or need for the advance copy NCP in order for any of this to work. From personal experience, downloading drivers from websites other than the Nvidia website can cause your sim to crash regularly. I downloaded an older driver from a website that caused routine sim failures. Fortunately, no issues with the advanced DLSS4 driver. If it causes issues, I’ll remove it and wait until the official version comes out. A possible solution is to run “Clean Disk”‘to get rid of any file that conflicts with the DLSS4 driver. Good luck. Edited January 28, 20251 yr by Huascar
January 28, 20251 yr 5 hours ago, Huascar said: From personal experience, downloading drivers from websites other than the Nvidia website can cause your sim to crash regularly. I downloaded an older driver from a website that caused routine sim failures. Fortunately, no issues with the advanced DLSS4 driver. If it causes issues, I’ll remove it and wait until the official version comes out. A possible solution is to run “Clean Disk”‘to get rid of any file that conflicts with the DLSS4 driver. Good luck. Well, i had a similar issue: All is working in 2024 but 2020 did CTD. So i went back to 566.36 and dlss 3.8.10 only for 2020 and all is running good. For some reason the Cuda driver 2020 doesn.t like it. I will wait until the official driver comes out on thursday. But in 2024 i can say WOW! from avarage 65 fps to 100 fps with everything maxed out. Very nice. Almost no ghosting with quality. OS: Windows 11 Home 64bit//Case: NZXT H7 Elite Black//CPU: i9 13900KS@6ghz//Mobo: Gigabyte Z790 Aorus Elite AX//AIO: NZXT Kraken Elite 360 RGB V2 Black//RAM: Kingston Fury Renegade RGB DDR5 6000Mhz - 64GB//GPU: Gigabyte GeForce RTX 4090 Gaming OC//Storage: Seagate FireCuda 530 - 4TBx2 plus 1x Intel SSDPEKNW020T8-2TB//PSU: Be Quiet! Pure Power 12 M 1000W//Monitor: LG 37,5 L 38WP85C-W//Hotas Joystick: Velocity One Flightdeck//Keyboard: Logitech G213 Prodigy
January 28, 20251 yr Installed the new dlls files, installed the new CUDA driver and changed the MSFS2024 profile to J using Nvidia Inspector. Before I could run DLAA in some areas but mostly DLSS quality but all I am seeing now is poor performance and stutters. It does look a little clearer but not enough to warrant the performance hit for me. Have I missed anything? Edit: Deleting and rebuilding my rolling cache, shader cache and DX cache seems to have resolved and all looks like it is running well now. Maybe worth anyone else having problems giving this a go. Edited January 28, 20251 yr by cianpars Ryzen 5800X3D, Nvidia RTX5080 - 32 Gig DDR4 RAM, 1TB & 2 TB NVME drives - Windows 11 64 bit MSFS 2024 Premium Deluxe Edition Resolution 2560 x 1440 (32 inch curved monitor)
January 28, 20251 yr The new 4 DLSS work good here with my 3080 and FG (dlssg-to-fsr3), almost no ghosting, clearer image at quality level. Edited January 28, 20251 yr by Claudius_ Missing the PMDG DC6 in MSFS 2024 (she's here, but...).
January 28, 20251 yr 2 minutes ago, Claudius_ said: The new 4 DLSS work good here with my 3080 and FG (dlssg-to-fsr3), almost no ghosting, clearer image at quality level. Missing the PMDG DC6 in MSFS 2024 (she's here, but...).
Create an account or sign in to comment