11 minutes ago, Michael Moe said:

I have EFB's which are more dimmed than PFD/ND/ECAM . Any one else having this. ?

Could use some more brightness/sharpness

Michael Moe

Are brightness and contrast already maxed out?

Hotfix just released.

https://forum.inibuilds.com/topic/25525-inibuilds-a350-airliner-for-microsoft-flight-simulator-2024-2020-v101-released/

 

They also released a paint kit

Edited February 28, 20251 yr by Tuskin38

Does one re-download or is there an email please?

v1.0.1
Systems & EFB ⚙️🖥️
Improvement – 1000 SimBrief Profile
Fixed – RAT Animation
Fixed – FS20 STBY compass bug
Fixed – ISIS inHG period displacement bug
Fixed - Before TO checklist: PACK line must be changed – improvement based on pilot feedback
Fixed - Avionics door see through when in open position
Fixed - Cockpit door open without OPEN light
Improvement – When ENG ANTI ICE is on on ground, FF now increases per engine. Pilot
feedback based on line operations whereby increased fuel flow should be something pilots
consider when planning taxi fuel with with long taxi times during icing conditions and is a
specialty of the A350 as it is an exceptionally large increase.
Fixed – DIRECT Law activation bug
Fixed - Selecting a DTO from the ND causes disco in active FP
Fixed - AFS BUG and latched descent
Fixed - Magenta target speed dot (while in selected speed) mimics the selected speed instead
of showing us what the managed speed target would be.
Fixed – ELEC Bus failure improvements
Fixed - VOR needle part visible when no station tuned
Fixed - Incorrect Squawk green digit colours when on
Fixed – Fuel temps got too low
Fixed - Manually tuned M bug
Fixed - RNV approach NM in PFD shifted bug
Fixed - LW different in PERF APPR vs FUEL/LOAD bug
Fixed - TRK/FPA FPA window when on ALT
Fixed - Noise info present in CLB page after noise complete
Fixed – PRESS bug
Fixed - No FMA box around THR CLB<>DCLB change
Fixed - FLS beam, dashes are too big
Fixed - Incorrect Vmax at conf 1
Fixed - Landing CABIN READY does not reset
Fixed - Odd clipped level off arrow in ND, related to FCU and -ALT CSTR interaction
Fixed - Step clb distance issue FPLN
Fixed – WASM crash for CTR_Gauge_Draw crash - Cycling SD via ALL
Fixed -CFG & Disable assistance
Fixed – WASM Crash for MFD_Gauge_Draw - Pressing "up" arrow on NOTEPAD after inputting
text
Fixed - GD not visible during climb on selected speed and incorrect short term managed spd
Fixed - CTR exception when using SD "all" button or hitting video in No Cabin
Fixed – WASM crash due to memory allocations [LNAV crashes, or SB import]
Fixed - Sim rate limited to 2x in some situations
Fixed - Cant clear FIX INFO if you navigate away from the TAB
Fixed - G/S mode inhibit on SURV page doesn't work
Fixed - Can't manually tune ILS frequencies with numbers that are behind decimal
Fixed – FADEC power on time delay when using o/h buttons
Fixed - Seems like editing the ALTN messes up with the VD
Fixed - Incorrect Vmax CONF3
Fixed - Incorrect G/S indication with G/S deselected
Fixed - Radio mins limited to 100 ft or above - should accept below?
Fixed - No A/Floor protection in place when A/THR is switched off manually
Fixed – SEC plan swapping with active
Fixed – FS20 Interactive points affecting jetway placement for -900
Fixed - Update max mach in cfgs causing overspeed warnings with some third party ACARS
Fixed – Delay in pulling charts
Fixed - OIS - GSX Menu - Clicking "Next Page" closes and resets the menu
Fixed - [0.0.018][FS20] OIS remove "Performance Mode" toggle
Fixed - OIS TO PERF THS for TO
Fixed - LBS fuel display center tanks not truncating value
Improvement - Overhaul of NG auth system
Fixed - OIS Enroute Map - Standard - Disable OSM hyperlink
Fixed - Some options syncing issues -
Fixed - Loadsheet Lbs handling improvement
Fixed - Loadsheet update improvement for pax count
Fixed - Enroute map attribution link will open a new window instead of locking the OIS
Fixed - Some performance improvements to perf handling

3D Art 🎨🖌️
Addition – Supplementary EXT Power Cable
Fixed - Nose gear hose bit doesn't move with gear
Improvement -FS20 Performance Exercise on Node count & vertex count for those who are CPU
limited

Sounds🔊🎧
Fixed - FS20 excessively loud gear drag
Improvement - Reduced gear drop sound volume
Improvement - Tweaked FS20 engine levels
Fixed - Increased FS20 aft engine volume
Fixed - FS20 aft engine volume positioning
Adjusted - FS20 manipulator vol levels
Fixed - manipulator 3D spatialization
Fixed - Modified volume of some misc interactions (door, tray table etc)
Fixed - Tweaked engine levels overwing
Fixed - Smoothened transition to buzzsaw outside of toga takeoff
Fixed - negligible difference to gear drag vol with environmental sound slider
Fixed -Eng whine mixing improvements
Fixed - Adjusted position of nose gear thud on rotation
Fixed 'crashing' sound heard on rotation
Fixed - Retard callout volume level

Just now, cavaricooper said:

Does one re-download or is there an email please?

Just open the ini manager it should auto update 

Just now, cavaricooper said:

Does one re-download or is there an email please?

Just install the update via the IniManager.

Just now, cavaricooper said:

Does one re-download or is there an email please?

Just use the Manager and Update.

Impressive change log after one day. About to buy.

v1.0.1
Systems & EFB ⚙️🖥️
Improvement – 1000 SimBrief Profile
Fixed – RAT Animation
Fixed – FS20 STBY compass bug
Fixed – ISIS inHG period displacement bug
Fixed - Before TO checklist: PACK line must be changed – improvement based on pilot feedback
Fixed - Avionics door see through when in open position
Fixed - Cockpit door open without OPEN light
Improvement – When ENG ANTI ICE is on on ground, FF now increases per engine. Pilot
feedback based on line operations whereby increased fuel flow should be something pilots
consider when planning taxi fuel with with long taxi times during icing conditions and is a
specialty of the A350 as it is an exceptionally large increase.
Fixed – DIRECT Law activation bug
Fixed - Selecting a DTO from the ND causes disco in active FP
Fixed - AFS BUG and latched descent
Fixed - Magenta target speed dot (while in selected speed) mimics the selected speed instead
of showing us what the managed speed target would be.
Fixed – ELEC Bus failure improvements
Fixed - VOR needle part visible when no station tuned
Fixed - Incorrect Squawk green digit colours when on
Fixed – Fuel temps got too low
Fixed - Manually tuned M bug
Fixed - RNV approach NM in PFD shifted bug
Fixed - LW different in PERF APPR vs FUEL/LOAD bug
Fixed - TRK/FPA FPA window when on ALT
Fixed - Noise info present in CLB page after noise complete
Fixed – PRESS bug
Fixed - No FMA box around THR CLB<>DCLB change
Fixed - FLS beam, dashes are too big
Fixed - Incorrect Vmax at conf 1
Fixed - Landing CABIN READY does not reset
Fixed - Odd clipped level off arrow in ND, related to FCU and -ALT CSTR interaction
Fixed - Step clb distance issue FPLN
Fixed – WASM crash for CTR_Gauge_Draw crash - Cycling SD via ALL
Fixed -CFG & Disable assistance
Fixed – WASM Crash for MFD_Gauge_Draw - Pressing "up" arrow on NOTEPAD after inputting
text
Fixed - GD not visible during climb on selected speed and incorrect short term managed spd
Fixed - CTR exception when using SD "all" button or hitting video in No Cabin
Fixed – WASM crash due to memory allocations [LNAV crashes, or SB import]
Fixed - Sim rate limited to 2x in some situations
Fixed - Cant clear FIX INFO if you navigate away from the TAB
Fixed - G/S mode inhibit on SURV page doesn't work
Fixed - Can't manually tune ILS frequencies with numbers that are behind decimal
Fixed – FADEC power on time delay when using o/h buttons
Fixed - Seems like editing the ALTN messes up with the VD
Fixed - Incorrect Vmax CONF3
Fixed - Incorrect G/S indication with G/S deselected
Fixed - Radio mins limited to 100 ft or above - should accept below?
Fixed - No A/Floor protection in place when A/THR is switched off manually
Fixed – SEC plan swapping with active
Fixed – FS20 Interactive points affecting jetway placement for -900
Fixed - Update max mach in cfgs causing overspeed warnings with some third party ACARS
Fixed – Delay in pulling charts
Fixed - OIS - GSX Menu - Clicking "Next Page" closes and resets the menu
Fixed - [0.0.018][FS20] OIS remove "Performance Mode" toggle
Fixed - OIS TO PERF THS for TO
Fixed - LBS fuel display center tanks not truncating value
Improvement - Overhaul of NG auth system
Fixed - OIS Enroute Map - Standard - Disable OSM hyperlink
Fixed - Some options syncing issues -
Fixed - Loadsheet Lbs handling improvement
Fixed - Loadsheet update improvement for pax count
Fixed - Enroute map attribution link will open a new window instead of locking the OIS
Fixed - Some performance improvements to perf handling

3D Art 🎨🖌️
Addition – Supplementary EXT Power Cable
Fixed - Nose gear hose bit doesn't move with gear
Improvement -FS20 Performance Exercise on Node count & vertex count for those who are CPU
limited

Sounds🔊🎧
Fixed - FS20 excessively loud gear drag
Improvement - Reduced gear drop sound volume
Improvement - Tweaked FS20 engine levels
Fixed - Increased FS20 aft engine volume
Fixed - FS20 aft engine volume positioning
Adjusted - FS20 manipulator vol levels
Fixed - manipulator 3D spatialization
Fixed - Modified volume of some misc interactions (door, tray table etc)
Fixed - Tweaked engine levels overwing
Fixed - Smoothened transition to buzzsaw outside of toga takeoff
Fixed - negligible difference to gear drag vol with environmental sound slider
Fixed -Eng whine mixing improvements
Fixed - Adjusted position of nose gear thud on rotation
Fixed 'crashing' sound heard on rotation
Fixed - Retard callout volume level

7 minutes ago, Tuskin38 said:

Just open the ini manager it should auto update 

Ta, ALL who responded- C

Edited February 28, 20251 yr by cavaricooper

- and since there are quite a few WASM updates, they need to be recompiled so the first load will (again) be longer than normal.

Dera ini, please fix the landing gear compression, sick of hearing about it. Otherwise good job, especially on the impressive hotfix. 

7 hours ago, lwt1971 said:

Who here even talked about XP add-on prices until you brought it up? 

Well abrahams_tank did which is why I replied, lol.

20 hours ago, FedDriver said:

Based on what I see. I think no matter how hard you land the plane, It'll be stiff. It'll then slowly compress to visually simulates the suspension settling as the lift is dumped from the wings. The only way it will look right, is if you butter the plane so that the gear suspension would never have any impact to absorb. The landing gear from what I see has zero shock absorption. So you cant bottom out the gear suspension on impact. As for the lack of nose gear compression? Yeah, thats on all Ini planes as well. It has slight compression though. If you slam on the brakes to come to a stop you can see it. The problem? The whole plane reacts like a tiny little RC plane rather than a big heavy jet.

Horrible. MSFS generally has really bad gear suspension physics for large heavy jets. But this takes the cake.  I don't think Ini deserves my money for that alone hah.

 

If you go on the outside view of the Inibuilds A320 when you brake the nosewheel suspension doesn't compress... the tyre goes under the taxiway surface (and the nose appears to go down from the cockpit view). I know it's a free aircraft so fair enough - but does the A350 do any better?

2 hours ago, Farlis said:

Are brightness and contrast already maxed out?

Yes they were but thanks for the tip. The whiteness in letters and numbers are more dimmed.

Michael Moe