Stan57

I d/l this scenery only for it to be imediately deleted by Norton as unsafe. This was mainly based on the fact that it had not been downloaded many times but also because the author had not signed it. I d/l "boryspil.zip" instead but had to alter the hold short nodes in the Afcad so the AI Traffic would work.

Also when you have got loads of AI flying in your sim you need to D/L as many Afcad files as you can because AI Traffic will disappear if there is no room for the aircraft to park at its destination airport.The default Afcads dont have nearly enough parking spaces.If you just D/L afcads for the main airports that is a good start.

I have only recently learnt how to fly Helo,s since i found the gauge (rcbhhc22.zip) over at Avsim,dont know how i had missed this gauge since it has been around since 2007.What the gauge does is makes the aircraft a lot more stable below 1,000ft and so it is possible to approach real slow and touch down on the landing pads. The gauge (easy_hap.zip) also on Avsim works above 200ft and 40mph and makes it a lot easier to do the cruise. The main difference between the gauges is that the latter works similar to a normal Auto-pilot where you set the heading and altitude and then just sit back,whilst the first one mentioned uses the cyclic or joystick to control height and speed.IE.stick forward for forward speed and stick back for reverse.The throttle control on your joystick then controls your vertical speed,twist grip is used for turning and left and right to keep the helo level. Scenery for the Oil rigs can be found over at the ODG Group(Offshore Developement Group). The only drawback is that not all Helicopters will funtion using the 2 gauges together,but as luck would have it,the ones that will work are all the aircraft used by the Oil Industry. I fly on FS9 and so dont know which FSX heli,s will work but i will list the ones that work on FS9 when i find time.

If you did D/L the file as i did check in your "hidden folders"It installs the exe.file "eSMU5cZKU1K.exe" in computer/c/users/your name/app data/roaming.Delete the file.

Whenever i have this sort of problem i use the program "Jabbgl" first to get the AI aircraft on the ground and then alter the afcad to match the elevation.I guess this is what you just said Jim.

Dont know if this could have anything to do with it,but when uninstalling FS9 you have to uninstall the 9.1 update first.

Are the runway elevations set the same as the airport elevations in afcad.?

I think this has something to do with the file named "usenglish" found in your sound folder.There are usually 2 of them,one is for speeded up speech.You could try moving them to your desktop and try again.If this does not help just put the original files back.

I read somewhere that if you remove [land_3 and land_5] bgl,s that this will cure the flickering.I have done that and it was OK last time i landed at OMDB.I have backed up those 2 files incase the problem returns.

I managed to get the Glen Copeland Alt alerter working by altering the config settings to:- [Config]MaxSounds=1ErrorFlag= 0LvarStop=dsd_stop_sounds[LVars]Lvar00=AltAlert_PlaySound[sounds]Sound00=./Gauges/AltAlerterGau_2/AltitudeAlerter1.wav, 100 Sorry the above is correct,to get it working you have to alter this line:-gauge81=AltAlert_dsd_xml_sound3!dsd_xml_sound3, 0, 0, 1, 1, ./Gauges/AltAlerterGau_2/AltAlert_sound.iniIn the download it is as follows:-gauge81=AltAlert_dsd_xml_sound3!dsd_xml_sound3, 0, 0, 1, 1, ./Gauges/AltAlertGau_2/AltAlert_sound.ini Hope this helps.Stan

Try [(easy_hap.zip] available on Avsim.

I have just installed this scenery which is available on Flightsim.com (lkpr_x_rc2.zip).While it is probably OK if flying online, if you are not and are using AI Traffic as i do, the hold short nodes are too far from the runways and there are also a few bits of grass showing thru the apron.These can be fixed by altering the supplied Afcad file.Problem:-when you alter the afcad file the default buildings show thru the scenery which kind of messes things up.Solution:-Put the following exclude file in your Scenery cfg.file under the entry for LKPR:-(Exclude=N50 06.74,E14 15.74,N50 05.39,E14 17.47,Objects).This will remove nearly all the default buildings from the Terminal area and also from the area near the runway 31 hold point where biz jets park.Also turn off crash detect as there are quite a few crash boxes in the scenery.Hope this is of use to anyone looking for scenery for LKPR.Yours Stan.

Or try "find_all_duplicate_v2.4.zip" by Gerard Durand in Avsim file library.

There is a FDE Update v9.7 which addresses the steering of the B747-400.You can get it at free sky project.com

I would try running ACA2005V1.6 and get shut of any errors that that shows up.Last time i had OOM errors was when i had two conflicting sceneries in the sim.I could remove any one of them and everything would run OK,but have both in the sim at the same time and OOM errors would start again.MSFS will run OK with one or two small errors but gives up when there are multiple errors.

If you do not uninstall the FS9.1 Patch and then uninstall FS9 you will have problems reinstalling FS9.

The file was "18842_Singapur" and it is on avsim ru.If you have got that "Wallahula mine" scenery list there is a link which takes you straight to the D/L.

I was having the same problem after D/L singapore Changi from AVSIM RU site.There were 7 files in the D/L and one was in acrylic and i didn,t recognize the type of files it contained so i ignored that one.One file was called scenery and contained 2 folders ASIA and WORLD.Now in the Asia folder there were a lot of those AP/AB/HL etc files and it said to place them in the SCENERY/ASIA/SCENERY folder overwriting the ones already there.That is when my scenery problem started,the 2 most noticable buildings in the water were a football stadium and one square type building next to it.So i got the same files that i had overwritten from the MSFS disc 4 and overwrote the ones i had previously overwritten.This cured the problem and now the 2 buildings are back on dry land.StanPS. Another problem with the scenery was an "wsssDELETE AF2" file in one of the other airport files which deleted the ramp and runways at Changi.Once i removed that file the ramp and runways re-appeared.

Just d/l framework one.

Is this with the traffic off as well.If it is i would do a complete re-install.I have had to do it and i am slowly trying to get it back as it was.If you do a complete re-install dont forget that you will have to uninstall the fs9.1 Patch first.You can save things like the aircraft that you fly,gauges,effects and anything else that you think you might need but save them away from your fs9 folder.If you have cleared everything then it should load,then you can bit by bit put things back into it,testing each time you add something to make sure it still loads.This is how i got mine working again and at the moment i am flying EGLL/KJFK.Dont forget to remove the Backup folder that the patch installs or it wont remove everything.You have to manually delete the fs9 cfg file.No point in saving it if it wont load.

Have you tried doing a similar thing with the scenery cfg.What i mean is, because you cant get into MSFS to delete things the normal way edit the scenery cfg by removing all entries above say level 40.Then try and load msfs.I keep reading this thread because soon after installing EPWA 2010 i started having the same problems you are getting.I have looked at that scenery and one of the bgl. files is called traffic,although it is not an Aircraft traffic bgl. i am wondering if MSFS is trying to load it as if it were,then on finding out it cant it throws out the OOM,or ntdll,etc etc.I know it is not an aircraft traffic file because i tried to break it down with T/TOOLS and it couldn,t do it.

You could try editing the FS9. CFG by changing this section just to see if it will load.[TrafficManager]TrafficDensity=0IFROnly=0EnableAirline=0EnableGeneralAviation=0I have just been having the same sort of problem but i have managed to get flying again but only without all my addon traffic files and i have 2GB of RAM.I have though altered the AIRCRAFT in the default traffic file to mostly BAW/KLM machines and i can now fly with 100% traffic,albeit with just the altered default traffic.

If the sound .dll problem relates to FSSound.dll you need to add:-[old modules]FSSound.dll to your FS9 config. then the warning should disappear.

Each time i alter joystick assignments i restart the Sim.If i dont i find the old settings reload the next time i use the Sim.Stan

The heading can get screwed up if you change the direction of your aircraft whilst in Slew mode.