Is it possible to use the interior.mdl with a swapped exterior.mdl?  This usually works with FSX mdls, but I have run into a couple MDLXMDLH that do not work when swapped.

I assume some CS737 vs Milviz737 comparisons will be upcoming.

Corrected START UP (Cold and dark or ready to start (from 3)

 

 

MilViz B737-200 Quick Start Procedure

• 1) BATTERY – ON and close cover
  2) APU – START (two left clicks)
  2a) If GEN1 OFF BUS lighted – GEN1 cycle (left click)
  • If GEN2 OFF BUS lighted – GEN2 cycle (left click)
    If APU GEN OFF BUS lighted – APU GEN Left and Right ON
  3) APU BLEED AIR – ON
  4) ISOLATION VALVE – CLOSE (right click)
  5) START VALVE ARMING – Open cover and switch ON
  6) ENGINE START – Left Switch to GRD
  7) When N2 reaches 22% - Left CUTOFF Lever to IDLE
  
  • Verify left ENGINE START switch returned to OFF
  8) ENGINE START – Right Switch to GRD
  
  • When N2 reaches 22% - Right CUTOFF Lever to IDLE
    Verify left ENGINE START switch returned to OFF
  9) START VALVE ARMING – Close Cover
  10) BLEED – Left and Right Engine Bleed Air Switches to ON
  11) L PACK – ON
  
  • R PACK – ON
  12) GASPER FAN – ON
  13) ISOLATION VALVE – AUTO (left click)
  14) APU BLEED AIR – OFF
  15) PITOT STATIC HEAT – A and B to ON
  16) YAW DAMPER – ON
  17) APU – OFF
  18) GEN1 and GEN2 – Cycle (left click)
  19) MASTER CAUTION – Press to clear

At least rudder behavior seems to be quite realistic on this one. Disconnect yaw damper and then apply full left or right rudder and you will see the aircraft rolling over in no time, just like happened with those B737 uncommanded rudder movement related accident's in the 90's. 

I assume some CS737 vs Milviz737 comparisons will be upcoming.

I am sure the Milviz 732 will hands down blow CS out of the water in all aspects. CS does have the advantage of exterior models though; that is why I was curious about a swap.

Yes , this bird works with DX-10. Is there really any other sim than a DX-10 SIM?

News I've been waiting for. Going to take my $5 off coupon and put it to work as soon as the dust settles a bit.

The coupon that was sent out to some is borked.  Don't know what's going on with my computer today... (user error?)

 

I'm working on it!

First flight.... Amazing bird, very well done!

 

 

Meh I pre ordered this and paid many months ago so not really, not that FTX Global was cheap though.  :lol:

 

Night lightning: 

 

 

Wow, that's better than the JF version!

My No.2 gen does not trip on when I click it. Does anyone else have this issue?

How is fps compared to the Ngx ?

Is PDCS simulated in the non-FMS version?

Is PDCS simulated in the non-FMS version?

No PDCS was programmed for this release.

There is no PDCS in any version.  A coffee was spilled in that "area" and the darned thing hasn't worked since.  (this is clearly posted on the sales site)  The weather radar was damaged in the same... incident.

Milviz,

 

Since I'm not a prepurchaser, I can't see for myself yet, but how do you set correct EPR for takeoff, climb, cruise, max cont. in the non-FMS version?   I only see pictures for the FMS version, and right below the FMS is a thrust rating control panel based on TAT.  Since you need something to be able to reference the correct EPR,  I assume that is still there for the non-FMS version, right? 

 

Are there plans to make a workable PDCS for non-fms, or is this thrust-rating panel the final thing?