November 2, 201510 yr Does anybody know the current state of the FSGlobal mesh for DVD customers? The last update was beginning of October, since then nothing. Don't think you need it. I just copied the files from the five disks and manually installed then in the scenery directory. My system specs: Intel [email protected] - 5.2 GHz, NVIDIA GeForce RTX 3080, 32GB DDR4 RAM, Noctua NH-D15 CPU Cooler,1TB Seagate SSD, 4TB Seagate HD, Windows 10, Asus 32 inch monitor, Saitek Yoke, Throttle Quadrant, Rudder Pedals and Trim Wheel Sims: MSFS2020 Preferred Aircraft Black Square Bonanza, and Baron, A2A Comanche, PMDG DC-6, Red Wing L1049
November 2, 201510 yr Does anybody know the current state of the FSGlobal mesh for DVD customers? The last update was beginning of October, since then nothing. For online orders, it was just an updated wrapper / installer. You can manually add the entries into scenery.cfg with no issue. My entries sit below BASE and above Africa. Wes Meyer
November 2, 201510 yr I'm guessing Orbx are actively 'doing stuff' right now, as none of the global server links are currently working. They're all returning 'File Not Found' errors. Hopefully, this means I'll soon get SP4 for v3;-) Windows 10 (x64) - X-Plane 11 - M/B: Asus ROG Maximus IX Hero - CPU: i7 7700k (@5.0GHz) - RAM: 32Gb Corsair Vengeance LPX DDR4 @ 3200MHz - Video: GTX1080ti - Cooling: Custom water loop (EK 140 Revo D5 pump/res combo, EK EVO CPU block, EK XE360 Rad)
November 3, 201510 yr Author Dash 8-Q400 From the Majestic FB page - I have not tested it yet =============================================== This is yet another replacement of the previously released beta and RC1 versions of the patch. It can be installed over the 1.016 or 1.017 beta1/RC1 version Q400 PILOT edition, which can be downloaded via the SUPPORT/USER AREA at the Majestic Software website. The changes have been added to the read-me file, which is shown at the end of the installation process, and listed at the end of this posting. NOW: This is what "MANY" have been asking about and here is your chance to take a stab at a beta version of the Prepar3D V3.0 - compatible gauge dll file included in the /panel folder upon installation. If desired this gauge file can be renamed into mjc84_main.dll in order to check the operation of the aircraft under Prepar3D V3.0 Rich Sennett
November 3, 201510 yr Aerosoft A320/321 version 1.31 with Prepar3d v3 support has been released... [email protected] ∣ Asus ROG Strix B650E-E ∣ 64Gb@6000MT ∣ NVidia 5090 FE
November 3, 201510 yr Author carlito777, on 03 Nov 2015 - 08:10 AM, said: Aerosoft A320/321 version 1.31 with Prepar3d v3 support has been released... Beat me to it Carlo - thanks ========================================== 1.31 Cleanup and P3D v3 compatibility ND/WXR: * ND VOR1 Flickering because of PFD Fixed MODELLING: * VSpeed knob animation wrong, fixed. * Texture missing in my VC of the A321 both IAE and CFM version, fixed. DIVERSE: * Error in aircraft.cfg of the A321IAE. In section [FLTSIM.4] in the line "texture" it should read "Qatar_A7NEO" and not "Qatar_A7Sharklet" * Cockpit Voice Recorder GND CTL switch remains on, fixed. * Center panel Chrono only works after second mouse click, fixed. * Added Avatar (only for P3D V3 users!!) * Hydraulic actuator issue fixed. * Windows 10 font issue fixed. MCDU2/ CHECKLIST ETC: * Ground Volume raised. * BARO REF if CRZ LVL is below TRANS ALT issue fixed * APPROACH CHECKLIST – LOC APPROACH issue fixed. * MCDU2 – LOAD FUEL MENU - Trim setting values from Load- and Fuelplanner added (new feature). * MCDU2 – LOAD FUEL MENU – Modified pax weight saved (new feature). * Manually setting of PITCH TRIM values using trim wheel and ECAM FCTL (fixed) [note: flight saves from older versions cannot be used in 1.31] SAVE AND LOAD FLIGHT FUNCTION: * PAX Weight on Load Fuel Setup now remembered. Rich Sennett
November 3, 201510 yr Hi @all, Sorry double post... :Nail Biting: 12900K | Crucial 4TB | 64GB | ASUS RTX 3090
November 3, 201510 yr Don't think you need it. I just copied the files from the five disks and manually installed then in the scenery directory. Thanks - how do you do this. The disks contain *.bin files, do you just copy these over? An older guide indicates that you have to extract them to *.bgl files. Is there a guide on how to get these manually installed? Ian R Tyldesley
November 3, 201510 yr Beat me to it Carlo - thanks ========================================== 1.31 Cleanup and P3D v3 compatibility ND/WXR: * ND VOR1 Flickering because of PFD Fixed MODELLING: * VSpeed knob animation wrong, fixed. * Texture missing in my VC of the A321 both IAE and CFM version, fixed. DIVERSE: * Error in aircraft.cfg of the A321IAE. In section [FLTSIM.4] in the line "texture" it should read "Qatar_A7NEO" and not "Qatar_A7Sharklet" * Cockpit Voice Recorder GND CTL switch remains on, fixed. * Center panel Chrono only works after second mouse click, fixed. * Added Avatar (only for P3D V3 users!!) * Hydraulic actuator issue fixed. * Windows 10 font issue fixed. MCDU2/ CHECKLIST ETC: * Ground Volume raised. * BARO REF if CRZ LVL is below TRANS ALT issue fixed * APPROACH CHECKLIST – LOC APPROACH issue fixed. * MCDU2 – LOAD FUEL MENU - Trim setting values from Load- and Fuelplanner added (new feature). * MCDU2 – LOAD FUEL MENU – Modified pax weight saved (new feature). * Manually setting of PITCH TRIM values using trim wheel and ECAM FCTL (fixed) [note: flight saves from older versions cannot be used in 1.31] SAVE AND LOAD FLIGHT FUNCTION: * PAX Weight on Load Fuel Setup now remembered. I only found the a320/321 updated, not the a318/319. Is this what you guys found also? Evan Hardin
November 3, 201510 yr 318/319 Not undated yet there testing. David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
November 3, 201510 yr * Windows 10 font issue fixed. Problem still persists. Just installed 1.31 of the A320/321, rebooted and it messed up my EDGE and Steam fonts. Old workaround still does the job http://www.avsim.com/topic/473640-problem-with-win-10-fonts-aerosoft-airbus/ Delete original file and reinstall with the corrected one...
November 3, 201510 yr Author Problem still persists. Just installed 1.31 of the A320/321, rebooted and it messed up my EDGE and Steam fonts. Old workaround still does the job http://www.avsim.com/topic/473640-problem-with-win-10-fonts-aerosoft-airbus/ Delete original file and reinstall with the corrected one... Thanks for heads up Max Rich Sennett
November 4, 201510 yr How do we install into P3Dv3?? I downloaded version mjc8-400-Pilot-1_016-inst.exe and the mjc8-400-Pilot-patch1017RC2-inst.exe. When I run the 1.016 installer it asks for a location so I set it to the main P3Dv3 folder and it creates a folder inside P3Dv3 called Flight simulator X and installs it there! Then the Patch can't find 1.016! Pete Richards I've owned every version of flight simulator since Flight Simulator 3.0 in 1988. Windows 11 Pro loaded on a 4TB Gen5 Crucial T700 SSD, 4TB Samsung 990 Pro SSD, Ryzen 9 7950x3d, AS Rock X670e Taichi Motherboard, Gigabyte Gaming RTX 4090 OC 24GB, 64GB (2x32GB) Viper Venom DDR5-6000MT/s, MSI 32" MAG 321UPX QD-OLED 260hz 4K Gaming Monitor.
November 4, 201510 yr How do we install into P3Dv3?? I downloaded version mjc8-400-Pilot-1_016-inst.exe and the mjc8-400-Pilot-patch1017RC2-inst.exe. When I run the 1.016 installer it asks for a location so I set it to the main P3Dv3 folder and it creates a folder inside P3Dv3 called Flight simulator X and installs it there! Then the Patch can't find 1.016! Pete, I solved this by simply editing the path in the 1.016 Install dialog box and deleting the \Flight Simulator x part, leaving just the p3dv3. It then installs to the main P3Dv3 folder and, subsequently, the patch finds it. Marshall
November 4, 201510 yr Marshall, I don't follow you? I point the installer at P3Dv3. There is no option to delete the \Flight Simulator x part from the .016 Install dialog box. Pete Pete Richards I've owned every version of flight simulator since Flight Simulator 3.0 in 1988. Windows 11 Pro loaded on a 4TB Gen5 Crucial T700 SSD, 4TB Samsung 990 Pro SSD, Ryzen 9 7950x3d, AS Rock X670e Taichi Motherboard, Gigabyte Gaming RTX 4090 OC 24GB, 64GB (2x32GB) Viper Venom DDR5-6000MT/s, MSI 32" MAG 321UPX QD-OLED 260hz 4K Gaming Monitor.
Archived
This topic is now archived and is closed to further replies.